ViewSonic Projector PJD8633ws User Manual

 24
Locking control keys
With the control keys on the projector locked, you can prevent your projector settings 
from being changed accidentally (by children, for example). When the Panel Key 
Lock is on, no control keys on the projector will operate except   Power.
1. Press Lock
 on the remote control.
2. A confirmation message is displayed. Select Ye s to confirm.
To release panel key lock:
1. Press Lock
 on the remote control.
2. A confirmation message is displayed. Select Ye s to confirm.
Important...

 25
Setting the presentation timer
The presentation timer can indicate the presentation time on the screen to help you 
achieve better time management when giving presentations. Follow these steps to 
utilize this function:
1. Press Timer on the remote control to access the Presentation Timer menu or go to
the Option > Presentation Timer menu and  press   to display the Presentation
Timer page.
2. Highlight Timer Period and decide the timer period by pressing  / .
3. Press 
 to highlight Display Timer...

 26
Menu operation
The projector has multilingual on-screen display menus that allow you to make image
adjustments and change a variety of settings.
How to operate
1. Press MENU/EXIT on the projector or Menu on the remote control to open the
OSD menu.
2. When OSD is displayed, use  /  to select any feature in the main menu.
3. After selecting the desired main menu item, press   to enter sub-menu for feature
setting.
4. Use  /  to select the desired item and adjust the settings with  / .
5. Press...

 27
Menu tree
Main Menu Sub Menu Settings
PictureColor Mode RGB: Brightest / PC / Movie / ViewMatch / User1 / 
User2 / White Board / Black Board / Green Board
Video: Brightest / Game / Movie / ViewMatch / 
User1 / User2 / White Board / DICOM SIM / Green 
Board
Reference Mode RGB: Brightest / PC / Movie / ViewMatch
Video: Brightest / Game / Movie / ViewMatch
Brightness 0 - 100
Contrast 0 - 100
Color SettingColor Temp. User / Cool / Normal / Warm
Red Gain 0 - 100
Green Gain 0 - 100
Blue Gain 0 - 100
User...

 28
SettingProjector 
ProjectionFront-Table / Front-Ceiling / Rear-Table / Rear-
Ceiling
Menu SettingMenu Position Top-Left / Top-Right / Center / 
Bottom-Left / Bottom-Right
Menu Display Time 5 - 60 Sec
OSD Transparency Off - 90
HDMI Format DVI: RGB Enhance / RGB Normal / YCbCr
HDMI: Auto / RGB Full / RGB limited / YCbCr
HDMI Range Normal / Enhance 
Blank Screen Black / Red / Green / Blue / Cyan / Yellow / Magenta 
/ White
Start up Screen Start up Screen Off(Black) / ViewSonic / Blue
Message On / Off...

 29
OptionClosed Caption Off/ CC1~CC4/ T1~T2
PasswordChange Password Input new 
passwordConfirm 
password 
Password Yes / No
Password Delete Input 
currently 
passwordPassword Delete
Ye s / N o
Presentation 
TimerTimer Period 0 - 240 Min
Display Timer Always / 1 Min / 2 Min / 3 Min / 
Never
Timer Position Top-Left / Bottom-Left / Top-
Right / Bottom-Right
Timer Counting 
DirectionCount Down / Count Up
Start Counting Start Counting / OFF
High Altitude On / Off
Lamp SettingLamp Hours
Lamp Hours Reset Yes /...

 30
Picture
Color Mode
There are many factory presets optimized for various types of images.
• Brightest: Maximizes the brightness of the projected image. This mode is suitable 
for environments where extra-high brightness is required.
• PC: Is designed for presentations under daylight environment to match PC and 
notebook coloring.
• Game: Is appropriate for playing games.
• Movie: Is appropriate for playing colorful movies. This mode is suitable for viewing 
in a blackened (little light) environment
•...

 31
Color Setting
Adjust the color temperature. At higher temperature the screen looks colder; at lower
temperature, the screen looks warmer. If you select “User”, then you can change the
intensity of each of 3 color (Red Gain, Green Gain, Blue Gain) to customize user color
temperature.
User Color
User Color provides six sets (RGBCMY) of colors to be adjusted. When you select
each color, you can independently adjust its range, hue, saturation and gain according
to your preference.
White Intensity...

 32
3D Settings
This projector features a 3D function which enables you to enjoy the 3D movies, vid-
eos, and sporting events in a more realistic way by presenting the depth of the
images. You need to wear a pair of 3D glasses to view the 3D images.
3D Sync
When you discover the inversion of the image depth, enable this function to correct
the problem.
3D Format
Use this function to choose an appropriate 3D format if the projector cannot recognize
the 3D format.
If the 3D signal is input from an HDMI...

 33
Zoom
Using the remote control
1. Press Magnify on the remote control to display the Zoom bar.
2. Press  /  to magnify the picture to a desired size. 
3. Press “Enter” on the projector or remote control to switch to the paning mode and 
press the directional arrows to navigate the picture. The zoom bar needed to be 
shown on screen if we want to switch the paning mode.
4. To reduce size of the picture, press Magnify and press   repeatedly until it is 
restored to the original size.
Using the OSD menu...