ViewSonic Projector PJD8353s User Manual

PJD8653ws/PJD8353s
DLP Projector
User Guide
IMPORTANT:  Please read this User Guide to obtain important information on installing 
and using your product in a safe manner, as well as registering your product for future 
service. Warranty information contained in this User Guide will describe your limited 
coverage from ViewSonic Corporation, which is also found on our web site at http://www.
viewsonic.com in English, or in specific languages using the Regional selection box in the 
upper right corner of...

i
FCC Statement
This device complies with part 15 of FCC Rules. Operation is subject to \
the following two 
conditions: (1) this device may not cause harmful interference, and (\
2) this device must accept 
any interference received, including interference that may cause undesir\
ed operation.
This equipment has been tested and found to comply with the limits for a\
 Class B digital 
device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable 
protection against harmful...

ii
Important Safety Instructions
1. Read these instructions.
2.  Keep these instructions.
3.  Heed all warnings.
4.  Follow all instructions.
5.  Do not use this unit near water.
6.  Clean with a soft, dry cloth.
7.  Do not block any ventilation openings. Install the unit in accordance wi\
th the   
manufacturer’s instructions.
8.  Do not install near any heat sources such as radiators, heat registers, \
stoves, or other 
devices (including amplifiers) that produce heat.
9.  Do not defeat the safety...

iii
Declaration of RoHS2 Compliance
This product has been designed and manufactured in compliance with Direc\
tive 2011/65/
EU of the European Parliament and the Council on restriction of the use \
of certain hazardous 
substances in electrical and electronic equipment (RoHS2 Directive) an\
d is deemed to comply 
with the maximum concentration values issued by the European Technical Adaptation Commit-
tee (TAC) as shown below:
Substance Proposed Maximum
Concentration Actual Concentration
Lead (Pb) 0.1%<...

iv
Copyright Information
Copyright © ViewSonic®
 Corporation, 2013. All rights reserved.
Macintosh and Power Macintosh are registered trademarks of Apple Inc.
Microsoft, Windows, Windows NT, and the Windows logo are registered trademarks of Microsoft 
Corporation in the United States and other countries.
ViewSonic, the three birds logo, OnView, ViewMatch, and ViewMeter are registered trademarks 
of ViewSonic Corporation.
VESA is a registered trademark of the Video Electronics Standards Association. DPMS...

v
Notes on the AC Power Cord
AC Power Cord must meet the requirement of countries where you use this \
projector. Please 
confirm your AC plug type with the graphics below and ensure that the proper AC Power Cord 
is used. If the supplied AC Power Cord does not match your AC outlet, please contact your 
sales dealer. This projector is equipped with a grounding type AC line plug. Please ensure 
that your outlet fits the plug. Do not defeat the safety purpose of this grounding type plug. We 
highly...

6
Table of Contents
Introduction 7
Package Overview ................................. 7
Product Overview  ................................... 8
Main Unit  ............................................ 8
Control Panel  ..................................... 9
Connection Ports  ............................. 10
Remote Control  ................................. 11
Installation  12
Connecting to Computer/Notebook  ......12
Connecting to Video Sources  ...............13
Powering On/Off the Projector...

7
AC Power Cord
Unpack and inspect the box contents to ensure all parts listed below are\
 in 
the box. If something is missing, please contact our customer service.
Documentation:
 
yUser’s Guide (DVD)
 
yQuick Start Card AAA Batteries x 2
(For remote control)
Projector with lens cap
Remote Control
Introduction
Package Overview
 
  Due to different applications in each Country, some regions may have different accessories.
VGA Cable
AAAAAA   

8
Product Overview
1. Focus Ring
2.  Lens
3.  IR Receiver
4.  Control Panel
5.  Lamp Cover
Main Unit
3
4
8
6
1
3
2
6. Input / Output Connection Ports
7.  Power Socket
8.  Elevator Feet
9.  Elevator Feet
10.  Elevator Feet Spacer
(Front View)
(Rear View)
(Bottom View)
9
5
7
10    

9
Control Panel
1.  Power key / Power LED
2.  Four directional select keys / Keystone 
 
3. IR Receiver
4.  Menu / Exit
5.  Temp (Temperature) LED
6.  Lamp LED
7.  Enter
8.  Source
15
3
6
7
2
84