ViewSonic Projector PJD6235 User Manual
Have a look at the manual ViewSonic Projector PJD6235 User Manual online for free. It’s possible to download the document as PDF or print. UserManuals.tech offer 617 ViewSonic manuals and user’s guides for free. Share the user manual or guide on Facebook, Twitter or Google+.
46 Shutting down the projector 1. Press POWER and a confirmation message is displayed prompting you. If you don't respond in a few seconds, the message will disappear. 2. Press POWER a second time. 3. Disconnect the power cord from the wall socket if the projector will not be used in an extended period of time. CAUTION • To protect the lamp, the projector will not respond to any commands during the cooling process. • To shorten the cooling time, you can also activate the Quick Power Off function. See "Quick Power Off" on page 45 for details. • Do not unplug the power cord before the projector shutdown sequence is complete. MINI USBLANRS-232 II II
47 Menu operation Menu system Please note that the on-screen display (OSD) menus vary according to the signal type selected. The menu items are available when the projector detects at least one valid signal. If there is no equipment connected to the projector or no signal detected, limited menu items are accessible. Main menu Sub-menu Options 1. DISPLAY Screen ColorOff/Blackboard/Greenboard/ Whiteboard Aspect RatioAuto/4:3/16:9/ 16:10 (PJD6543w only)/Wide (PJD6543w only)/Anamorphic (PJD6235/PJD6245 only) Keystone Position Phase H. Size Zoom 3D Settings3D SyncAuto/Off/Frame Sequential/ Frame Packing/Top-Bottom/ Side-by-Side 3D Sync Invert Disable/Invert Color ManagementPrimary Color R/G/B/C/M/Y Hue Saturation Gain 2. PICTURE Color ModePC source: Brightest/PC/ViewMatch/Movie/Dynamic PC/Dynamic Movie/User 1/User 2 Video source: Brightest/Gaming/ViewMatch/Movie/ Dynamic Movie/User 1/User 2 Reference ModePC source: Brightest/PC/ViewMatch/Movie/Dynamic PC/Dynamic Movie Video source: Brightest/Gaming/ViewMatch/Movie/ Dynamic Movie Brightness Contrast Color Tint Sharpness Brilliant Color On/Off Color Temperature T1/T2/T3/T4 Save Settings
48 Main menu Sub-menu Options 3. SOURCE Quick Auto Search Off/On HDMI Format RGB/YUV/Auto HDMI Range Enhanced/Normal DynamicEco TimerDisable/5 min/10 min/15 min/30 min Smart Restart Off/On Pattern Off/01/02/03/04/05 My ButtonProjection (Projector Position)/3D Sync/Lamp Mode/ DCR/Closed Caption/Auto Off (Auto Power Off)/ Message/Screen Color/CEC/Auto Search (Quick Auto Search)/Information 4. SYSTEM SETTING: BASIC Language Multi-language OSD selection Projector PositionFront Table/Rear Table/Rear Ceiling/Front Ceiling Auto Power OffDisable/5 min/10 min/20 min/30 min/40 min/50 min/60 min TimerBlank TimerDisable/5 min/10 min/15 min/20 min/25 min/30 min Sleep TimerOff/30 min/1 hour/2 hours/3 hours/4 hours/8 hours/12 hours Panel Key Lock On/Off Splash Screen Black/Blue/ViewSonic/Off Message On/Off LAN Control SettingsDHCP On/Off Projector IP Address Subnet Mask Default Gateway DNS Server Apply Standby SettingsPower Saving On/Off Active VGA Out On/Off Active Audio Out On/Off Quick Power Off On/Off CEC On/Off
49 5. SYSTEM SETTING: ADVANCED High Altitude Mode On/Off DCR On/Off Audio SettingsMute On/Off Volume Menu SettingsMenu Display Time5 sec/10 sec/15 sec/20 sec/25 sec/30 sec Menu PositionCenter/Top-Left/Top- Right/Bottom-Left/ Bottom-Right Closed CaptionClosed Caption Enable On/Off Caption Version CC1/CC2/CC3/CC4 Lamp SettingsLamp Mode Normal/Economic Reset Lamp Timer Equivalent Lamp Hour Presentation TimerTimer Period 1~240 minutes Timer DisplayAlways/1 min/2 min/3 min/ Never Timer PositionTop-Left/Bottom-Left/Top- Right/Bottom-Right Timer Counting DirectionCount Down/Count Up Sound Reminder On/Off Start Counting/Off Security SettingsChange Password Power On Lock On/Off Remote Control Code A/B Reset SettingsReset All Settings Reset/Cancel Reset Color Settings
50 Main menu Sub-menu Options 6. INFORMATIONCurrent System Status•Source •Color Mode •Resolution •Color System •Equivalent Lamp Hour • MAC Address
51 Description of each menu Function Description Screen ColorCorrects the projected picture’s color when the projection surface is not white. See "Using Screen Color" on page 32 for details. Aspect RatioThere are several options to set the image's aspect ratio depending on your input signal source. See "Selecting the aspect ratio" on page 28 for details. KeystoneCorrects any keystoning of the image. See "Correcting keystone" on page 27 for details. Position Displays the position adjustment page. To move the projected image, use the directional arrow keys. The values shown on the lower position of the page change with every key press you made until they reach their maximum or minimum. Phase Adjusts the clock phase to reduce image distortion. H. SizeAdjusts the horizontal width of the image. ZoomMagnifies or reduces the projected image. See "Magnifying and searching for details" on page 27 for details. 3D SettingsSee "Using the 3D functions" on page 37 for details. Color ManagementSee "Color Management" on page 34 for details. 1. DISPLAY menu
52 Function Description Color ModePre-defined picture modes are provided so you can optimize your projector image set-up to suit your program type. See "Selecting a picture mode" on page 31 for details. Reference ModeSelects a picture mode that most suits your need for the image quality and further fine-tune the image based on the selections listed on the same page below. See "Setting the User 1/User 2 mode" on page 32 for details. BrightnessAdjusts the brightness of the image. See "Adjusting Brightness" on page 33 for details. ContrastAdjusts the degree of difference between dark and light in the image. See"Adjusting Contrast" on page 33 for details. ColorAdjusts the color saturation level -- the amount of each color in a video image. See "Adjusting Color" on page 33 for details. Tint Adjusts the red and green color tones of the image. See "Adjusting Tint" on page 33 for details. The function is only available when Video or S-Video with NTSC system is selected. SharpnessAdjusts the image to make it look sharper or softer. See "Adjusting Sharpness" on page 33 for details. Brilliant ColorAdjusts white peaking while maintaining correct color presentation. See"Adjusting Brilliant Color" on page 33 for details. Color TemperatureSee"Selecting a Color Temperature" on page 33 for details. Save SettingsSaves the settings made for the User 1 or User 2 mode. 2. PICTURE menu
53 Function Description Quick Auto SearchSee"Switching input signal" on page 25 for details. HDMI FormatSee"Changing HDMI input settings" on page 25 for details.HDMI Range DynamicEco Timer Allows the projector to decrease the power consumption automatically if no input signal is detected after a set period of time. It takes some time to initiate this function. Make sure the projector has been turned on for more than 4 minutes. Smart Restart Selecting On enables you to restart the projector immediately within 150 seconds after turning it off. After 150 seconds, if the projector is not turned on again, it will directly enter the standby mode. •It takes some time to initiate this function. Make sure the projector has been turned on for more than 4 minutes. If the projector is resumed by using the Smart Restart feature, this function can be executed immediately. •When On is selected, the Quick Power Off function will be automatically set to “On”. PatternThe projector can display several test patterns. It helps you adjust the image size and focus and check that the projected image is free from distortion. My ButtonSets a hotkey on remote control. 3. SOURCE menu
54 Function Description LanguageSets the language for the On-Screen Display (OSD) menus. See "Using the menus" on page 21 for details. Projector PositionThe projector can be installed on a ceiling or behind a screen, or with one or more mirrors. See "Choosing a location" on page 12 for details. Auto Power OffAllows the projector to turn off automatically if no input signal is detected after a set period of time. See "Setting Auto Power Off" on page 58 for details. Timer Blank Timer Sets the image blank time when the Blank feature is activated, once elapsed the image will return to the screen. See "Hiding the image" on page 36 for details. Sleep Timer Allows the projector to turn off automatically after a set period of time if the incoming signal is present or not. Panel Key LockDisables or enables all panel key functions except POWER on the projector and keys on the remote control. See "Locking control keys" on page 36 for details. Splash ScreenAllows you to select which logo screen will be displayed during projector start-up. MessageSelecting On displays the current information on the screen when the projector is detecting or searching for a signal. LAN Control SettingsSee"Controlling the projector through a LAN environment" on page 39 for details. Standby SettingsSee"Using the projector in standby mode" on page 45 for details. CECSee"Using the CEC function" on page 37 for details. 4. SYSTEM SETTING: BASIC menu II
55 Function Description High Altitude ModeA mode for operation in high altitude areas. See "Operating in a high altitude environment" on page 36 for details. DCR Enables or disables the DCR (Dynamic Contrast Ratio) function. Selecting On enables the function and the projector will automatically switch the lamp mode between normal and economic modes according to the input image detected. This function is only available when a PC source is in use. After enabling DCR, frequent lamp mode switching may shorten lamp life and noise level will vary during operation. Audio Settings The sound adjustments made as below will have an effect on the projector speaker. Be sure you have made a correct connection to the projector audio input/output jacks. See "Connection" on page 15 for more details. Mute Mutes the sound received from AUDIO IN. Volume Adjusts the sound level received from AUDIO IN. Menu Settings Menu Display Time Sets the length of time the OSD will remain active after your last key press. The range is from 5 to 30 seconds in 5-second increments. Menu Position Sets the On-Screen Display (OSD) menu position. Closed Caption Closed Caption Enable Activates the function by selecting On when the selected input signal carries closed captions. • Captions: An on-screen display of the dialogue, narration, and sound effects of TV programs and videos that are closed captioned (usually marked as "CC" in TV listings). This function is only available when a Composite video or S- Video input signal is selected and its system format is NTSC. Caption Version Selects a preferred closed captioning mode. To view captions, select CC1, CC2, CC3, or CC4 (CC1 displays captions in the primary language in your area). Lamp Settings Lamp Mode See"Setting Lamp Mode as Economic" on page 58 for details. Reset Lamp Timer See"Resetting the lamp timer" on page 62 for details. Equivalent Lamp Hour See"Getting to know the lamp hour" on page 58 for details on how the total lamp hour is calculated. 5. SYSTEM SETTING: ADVANCED menu