ViewSonic Projector PJD6220 User Manual
Here you can view all the pages of manual ViewSonic Projector PJD6220 User Manual. The ViewSonic manuals for Projector are available online for free. You can easily download all the documents as PDF.
Page 41
ViewSonic 34PJD6220/PJD6230/PJD6240 AppendixLED Indicator Messages LED Type Color Status Meaning LAMP LED TEMP LED Green Off Flash - The projector is in standby mode. LAMP LED TEMP LED Green GreenSolid Flash The projector system has some problems with its fan, so the projector cannot start up. LAMP LED TEMP LED Green GreenSolid SolidThe lamp is in good condition and is projecting at maximum brightness. LAMP LED TEMP LED Amber Green Solid SolidThe lamp has reached its end of life and must be changed...
Page 42
ViewSonic35PJD6220/PJD6230/PJD6240 RS-232 Command and Configuration RS232 Serial Remote Control Command Item Description Comment Baud Rate 19200 Parity Bit none Data Bit 8 Stop Bit 1 Assign Port COM1 Power On Command Send String BE, EF, 10, 05, 00, C6, FF, 11, 11, 01, 00, 01, 00 Response 06 Comment Power Off Command Send String BE, EF, 03, 06, 00, DC, DB, 69, 00, 00, 00, 00, 00 Response 06 Source Command Send String BE, EF, 02, 06, 00, 57, D0, 2E, 00, 00, 00, 00, 00 Response 06 Comment...
Page 43
ViewSonic36PJD6220/PJD6230/PJD6240 Down (for OSD) Command Send String BE, EF, 02, 06, 00, 0B, D2, 32, 00, 00, 00, 00, 00 Response 06 Comment Left (for OSD) Command Send String BE, EF, 02, 06, 00, DA, D3, 33, 00, 00, 00, 00, 00 Response 06 Comment Right (for OSD) Command Send String BE, EF, 02, 06, 00, 38, D2, 31, 00, 00, 00, 00, 00 Response 06 Comment Blank Screen Command Send String BE, EF, 02, 06, 00, DF, DF, 66, 00, 00, 00, 00, 00 Response 06 Comment Keystone Command Send String BE,...
Page 44
ViewSonic37PJD6220/PJD6230/PJD6240 ViewMatch Command Send String BE,EF,03,06,00,38,5A,88,00,00,00,00,00 Response 6 Comment Aspect Ratio Command Send String BE, EF, 03, 06, 00, 0D, DA, 68, 00, 00, 00, 00, 00 Response 06 Comment ECO On Command Send String BE, EF, 03, 06, 00, EF, DB, 6A, 00, 00, 00, 00, 00 Response 06 Comment ECO Off Command Send String BE, EF, 03, 06, 00, 3E, DA, 6B, 00, 00, 00, 00, 00 Response 06 Comment Auto Source On Command Send String BE, EF, 03, 06, 00, 89, DB, 6C,...
Page 45
ViewSonic38PJD6220/PJD6230/PJD6240 Firmware Version Command Send String BE, EF, 03, 06, 00, D5, D9, 70, 00, 00, 00, 00, 00 Response Version Comment System Status Command Send String BE, EF, 03, 06, 00, 04, D8, 71, 00, 00, 00, 00, 00 Response 03 :Projector ON (Normal Mode) Comment Volume Command Send String BE, EF, 02, 06, 00, F8, DC, 71, 00, 00, 00, 00, 00 Response 06 Comment Volume+ Command Send String BE, EF, 02, 06, 00, F1, DE, 68, 00, 00, 00, 00, 00 Response 06 Comment...
Page 46
ViewSonic39PJD6220/PJD6230/PJD6240 Change to S-Video Channel Command Send String BE, EF, 03, 19, 00, E8, 69, 01, 47, 02, CC, CC, 00 Response 06 Comment Change to Composite Video Channel Command Send String BE, EF, 03, 19, 00, 78, A8, 01, 47, 02, CC, CC, 00 Response 06 Comment Change to HDTV(Y-Pb-Pr) Channel Command Send String BE, EF, 03, 19, 00, DA, 2B, 01, 47, 02, CC, CC, 00 Response 06 Comment Change to Computer2(Analog RGB) Channel Command Send String BE, EF, 03, 19, 1E, 90, 72, 01,...
Page 47
ViewSonic 40PJD6220/PJD6230/PJD6240 Compatibility ModesComputer: Video: Compatibility Resolution H-Sync [KHz] V-S ync [Hz] VGA 640 x 480 31.5 59.9 37.9 72.8 37.5 75.0 43.3 85.0 SVGA 800 x 600 35.2 56.3 37.9 60.3 48.1 72.2 46.9 75.0 53.7 85.1 XGA 1024 x 768 48.4 60.0 56.5 70.1 60.0 75.0 68.7 85.0 SXGA 1152 x 864 64.0 70.0 67.5 75.0 1280 x 960 60.0 60.0 75.0 75.0 1280 x 1024 64.0 60.0 WXGA 1280 x 768 47.8 60.0 60.3 74.9 68.6 84.8 1280 x 800 49.7 59.8 62.8 74.9 Signal Horizontal Frequency (kHz)...
Page 48
ViewSonic 41PJD6220/PJD6230/PJD6240 TroubleshootingRefer to the symptoms and measures listed below before sending the projector forrepairs. If the problem persists, contact your local reseller or service center. Please refer to Indicator Messages as well.Start-up problemsIf no lights turn on:„ Be sure that the power cord is securely connected to the projector and the other endis plugged into an outlet with power. „ Press the power button again. „ Unplug the power cord and wait for a short while, then...
Page 49
ViewSonic42PJD6220/PJD6230/PJD6240 Customer Support For technical support or product service, see the table below or contact\ your reseller. Note : You will need the product serial number. Country/RegionWeb SiteT=Telephone F=FaxE-mail Australia/New Zealandwww.viewsonic.com.auAUS=1800 880 818 NZ=0800 008 [email protected] Canadawww.viewsonic.comT (Toll-Free)= 1-866-463-4775T (Toll)= 1-424-233-2533F= [email protected] Europe/Middle East/Baltic countries/North...
Page 50
ViewSonic43PJD6220/PJD6230/PJD6240 Limited Warranty VIEWSONIC® PROJECTOR What the warranty covers: ViewSonic warrants its products to be free from defects in material and w\ orkmanship, under normal use, during the warranty period. If a product proves to be defect\ ive in material or workmanship during the warranty period, ViewSonic will, at its sole option, repair or replace the product with a like product. Replacement product or parts may includ\ e remanufactured or refurbished parts or...