ViewSonic Projector PJD5151 User Manual

34
If the 3D signal is input from an HDMI 1.4a compatible device, the projector detects the 
signal for 3D Sync information and once detected, it projects images in 3D format 
automatically. In other cases, you may need to manually select a 3D Sync format for the 
projector to project 3D images correctly.
To select a 3D Sync format:
1. Press 3D on the remote control to access the 3D Settings menu or go to the 
SOURCE > 3D Settings menu.
2. Press Enter and the 3D Settings page is displayed.
3. Highlight...

35
If available, you can press  or  on the remote control to adjust the projector’s sound 
level.
Turning off the Power On/Off Ring Tone
1. Open the OSD menu and go to the SYSTEM SETTING: ADVANCED > Audio 
Settings > Power On/Off Ring Tone menu.
2. Press / to select Off.
The only way to change Power On/Off Ring Tone is setting On or Off here. Setting the sound 
mute or changing the sound level will not affect the Power On/Off Ring Tone.
Shutting down the projector
1. Press Power and a confirmation...

36
Menu operation
Menu system
Please note that the on-screen display (OSD) menus vary according to the signal type 
selected.
The menu items are available when the projector detects at least one valid signal. If there is 
no equipment connected to the projector or no signal detected, limited menu items are 
accessible.
Main menu Sub-menu Options
1. 
DISPLAY
Screen ColorOff/Blackboard/Greenboard/
Whiteboard
Aspect RatioAuto/4:3/16:9 (PJD5151/
PJD5153/PJD5155/PJD5250/
PJD5253/PJD5255)/16:10...

37
Main menu Sub-menu Options
3. SOURCE
Quick Auto Search Off/On
3D Settings3D SyncAuto/Off/Frame Sequential/
Frame Packing/Top-Bottom/
Side-By-Side
3D Sync Invert Disable/Invert
Standby 
SettingsActive VGA Out Off/On
Active Audio Out Off/On
Auto Power OnComputer Disable/Enable
CEC Disable/Enable
Direct Power On Off/On
Auto Power OffPower Saving Disable/10 min/20 min/30 min
Sleep TimerDisable/30 min/1 hr /2 hr/3 hr/
4 hr/8 hr/12 hr
Smart Restart Disable/Enable
Quick Power Off Disable/Enable
4. 
SYSTEM...

38
Main menu Sub-menu Options
5. 
SYSTEM 
SETTING: 
ADVANCED
High Altitude Mode On/Off
DCR On/Off
Audio SettingsMute On/Off
Audio Volume
Power On/Off Ring 
ToneOn/Off
Closed Caption Off/CC1/CC2/CC3/CC4
Lamp SettingsLamp ModeNormal/Economic/
Dynamic/Sleep Mode
Reset Lamp Hours
Lamp Hours
Filter SettingsFilter Mode On/Off
Reset Filter Hours
Filter Hours
Remote Control Code 1/2/3/4/5/6/7/8
AdvancedSecurity SettingsChange Password
Power On Lock
Panel Key Lock Off/On
Reset Settings Reset/Cancel
6....

39
Description of each menu
Function Description
Screen ColorSee Using Screen Color on page 28 for details.This function is only available when a PC input signal is 
selected.
Aspect RatioSee Selecting the aspect ratio on page 27 for details.
KeystoneSee Correcting keystone on page 26 for details.
PositionDisplays the position adjustment page. To move the projected 
image, use the directional arrow keys. The values shown on the 
lower position of the page change with every key press you made 
until they...

40
Function Description
AdvancedColor
See Adjusting Color on page 29 for details.
Tint
See Adjusting Tint on page 29 for details.
This function is only available when a Composite video 
or S-Video input signal with NTSC system is selected.
Sharpness
See Adjusting Sharpness on page 29 for details.
Gamma
See Selecting a gamma setting on page 29 for details.
Brilliant Color
See Adjusting Brilliant Color on page 29 for details.
Noise Reduction
See Reducing image noise on page 29 for details.
Color...

41
FunctionDescription
Auto Power OffPower Saving
See 
Setting Power Saving on page 47  for details.
Sleep Timer
See  Setting Sleep Timer on page 47  for details.
Smart Restart Selecting 
Enable enables you to restart the projector 
immediately within 120 seconds after turning it off. After 120 
seconds, if the projector is not turn ed on again, it will directly 
enter the standby mode.
It takes some time to initiate this function. Make sure 
the projector has been turned on for more than 4 
minutes. If...

42
Function Description
Splash ScreenAllows you to select which screen will be displayed during 
projector start-up.
My ButtonSets a hotkey on remote control.
AdvancedPattern
The projector can display several test patterns. It helps you 
adjust the image size and focus and check that the projected 
image is free from distortion.
Message
Selecting On displays the current information on the screen 
when the projector is detecting or searching for a signal.
Presentation Timer
See Setting the presentation...

43
Function Description
Closed CaptionSelects a preferred closed captioning mode when the selected 
input signal carries closed captions.
• Captions: An on-screen display of the dialogue, narration, 
and sound effects of TV programs and videos that are 
closed captioned (usually marked as CC in TV listings).
This function is only available when a Composite video 
or S-Video input signal with NTSC system is selected.
To view captions, select CC1, CC2, CC3, or CC4 
(CC1 displays captions in the primary...