ViewSonic Projector PJ556D User Manual

6ViewSonic	 PJ556D

Package Contents
When	 you 	 unpack 	 the 	 projector, 	 make 	 sure 	 you 	 have 	 all 	 these 	 components:
 Save the original shipping carton and packing material; they will come in handy 
if you ever to ship your unit. For maximum protection, repack your unit as it 
was originally packed at the factory.
 Accessories and components may vary by retailer and region.
 Lithium  battery  is  loaded  in  the  remote  control.  Remove  the  transparent 
insulation tape by pulling it...

ViewSonic	 PJ556D7

Projector Over view 
Front View
	1	 Vent  lat  on 	 holes
	
2
	 Project  on 	 lens
	
3
	 Front 	 IR 	 remote 	 control 	 sensor
	
4
	 Lens 	 cap
	
5
	 Elevator 	 foot
	978
1123456
	6 	 Elevator 	 button
	
7
	 Zoom 	 r  ng
	
8
	 Focus 	 r  ng
	
9
	 Control 	 panel 

8ViewSonic	 PJ556D

Rear View
	1 	 Rear 	 IR 	 remote 	 control 	 sensor 		
	
2 	 Vent
 lat  on 	 holes
	
3 	 Connect
 on 	 ports
	
4 	 Elevator
	 button
	5	 Elevator 	 foot
	6	 Speaker
	7	 AC 	 power 	 socket
	8	 Kens  ngton 	 lock
1232
65478
1
2
2
2
 This projector can be used with a ceiling mount for support. The ceiling mount 
is not included in the package.
Bottom View
	1 	 Lamp 	 cover
	 	
2 	 Ce  l  ng 	 mount 

ViewSonic	 PJ556D9

Using the Product
Control Panel
LED
	1
  Lamp 	 LED 	 nd  cator
	 Refer 	 to 	 “LED 	 Ind  cator 	 Messages”.
	
2  
  Power 	 LED 	 nd  cator
	 Refer
	 to 	 “LED 	 Ind  cator 	 Messages”.
Button
	 Funct  on
	3 Power
	 Refer 	 to 	 “Power  ng 	 On/Off 	 the 	 Projector”.
	4	Keystone /
	 Adjusts
	
mage 	 d  stort  on 	 caused 	 by 	 t  lt  ng 	 the 	 projector.
	5	Auto 
	 Automat  cally 	 adjusts 	 frequency 	 and...

10ViewSonic	 PJ556D

Connection Ports
	1 SERIAL
	 When 	 operat  ng 	 the 	 projector 	 v  a 	 a 	 computer, 	 connect 	 th  s 	 to 	 the 	 controll  ng 	
computer’s 	 RS-232C 	 port.
	 2
  USB Connector (Service purpose)
	This connector is for firmware update.
	
3
 COMPUTER IN
	 Connects 	 mage 	 nput 	 s  gnal 	 (analog) 	 to 	 th  s 	 jack.
	
4
	S-VIDEO 
	 Connects 	 S-V  deo 	 output 	 from 	 v  deo 	 equ  pment 	 to 	 th  s 	 jack.
	
5...

ViewSonic	 PJ556D11

Remote Control
	1 	 	Power	 Refer 	 to 	 “Powering 	 On/Off 	 the 	Projector”.
	
2
	
	 Four
	 directional 	 buttons
	 Use
	 four 	 directional 	 buttons 	 to 	 select 	
items 	 or 	 make 	 adjustments 	 to 	 your 	
selection.
	
3
	
	MENU
	 Displays 	 or 	 exits 	 the 	 on-screen 	 display
	 menus.
	4 	 	Laser
	 Aim 	 the 	 remote 	 at 	 the 	 viewing 	 screen,
	 press
	 and 	 hold 	 this 	 button 	 to 	 activate
	 the
	 LED 	 light 	 pointer.
	
5
	
	
Mute
	 Cuts 	 off 	 the 	 sound...

12ViewSonic	 PJ556D

Batter y Replacement
1.	 Open 	 the 	 battery 	 cover 	 n 	 the 	 d  rect  on
	 shown.
2.
	 Install 	 batter  es 	 as 	 nd  cated 	 by 	 the 	 d  agram
	
 ns  de 	 the 	 compartment.
3.
	 Close 	 the 	 battery 	 cover 	 nto 	 pos  t  on.
 Keep the batteries out of the reach of children. There is a danger of
  death by accidentally swallowing the battery.
 Remove batteries from remote control when not using for extended...

ViewSonic	 PJ556D13

Remote Control Operation
Po nt 	 the 	 remote 	 control 	 at 	 the 	 nfrared 	 remote 	 sensor 	 and 	 press 	 a 	 button.
 Operating the projector from the front
 Operat ng 	 the 	 projector 	 from 	 the 	 rear
 The  remote  control  may  not  operate  when  there  is  sunlight  or  other  strong 
light such as a fluorescent lamp shining on the remote sensor.
 Operate  the  remote  control  from  a  position  where  the  remote  sensor  is 
visible.
 Do not drop the...

14ViewSonic	 PJ556D

Desktop	typeLaptop	type
23
75
1
46

 When  connecting  cable,  power  cords  of  both  a  projector  and  external 
equipment should be disconnected from AC outlet.
 The figure above is a sample connection. This does not mean that all of these 
devices can or must be connected simultaneously.
 The cables that come with the projector may differ from the above illustration. 
The included cables are based on actual shipment delivery.
Installation
Connecting the Projector
	1	 RS232...

ViewSonic	 PJ556D15

Powering On/Off  the Projector
Powering on the projector:
1.	 Remove	 the 	 projector 	 lens 	 cap.
2.	 Complete 	 the 	 AC 	 power 	 cord 	 and 	 per  pheral 	 s  gnal 	 cable(s) 	 connect  ons.
3.
	 	 Press 	
	button 	 to 	 turn 	 on 	 the 	 projector.
4.	 Turn
	
on
	
your 	 source 	 (computer, 	 notebook, 	 DVD, 	 etc.). 	 The 	 projector 	 automat  cally 	
detects
	
your 	 source.
	 When 	 search  ng 	 message 	 appears 	 on 	 the 	 screen, 	 ensure...