ViewSonic Projector PJ513D/PJ513DB User Manual

ViewSonic                                                25                                                PJ513D/PJ513DB 
Hiding the image
In order to draw the audiences full attention to 
the presenter, you can use BLANK on the 
projector or remote control to hide the screen 
image. Press any button on the projector or 
remote control to restore the image. The word 
BLANK appears at the lower right corner of 
the screen while the image is hidden. When 
this function is activated with an audio input...

ViewSonic                                                26                                                PJ513D/PJ513DB
Freezing the image
Press the FREEZE button on the remote control to freeze 
the image. The word FREEZE will display in the upper left 
corner of the screen. To release the function, press any button 
on the projector or remote control.
Even if an image is frozen on the screen, the pictures are 
running on the video or other device. If the connected 
devices have active audio output,...

ViewSonic                                                27                                                PJ513D/PJ513DB 
Adjusting the sound
The sound adjustments made as below will have an effect on the projector speaker. Be 
sure you have made a correct connection to the projector audio input. See 
Connection on page 11 for how the audio input is connected.
Muting the sound
To temporarily turn off the sound,
1. Press MENU/EXIT and then press  /  until the SYSTEM SETUP: Advanced 
menu is highlighted....

ViewSonic                                                28                                                PJ513D/PJ513DB
Shutting down the projector
1. Press Power and a 
confirmation message will 
display prompting you. 
If you dont respond in a few 
seconds, the message will 
disappear.
2. Press Power a second time. 
The Power indicator light 
flashes orange, the projection 
lamp shuts down, and the fans 
will continue to run for 
approximately 90 seconds to cool down the projector.
To protect the...

ViewSonic                                                29                                                PJ513D/PJ513DB 
Menu operation
Menu system
Please note that the on-screen display (OSD) menus vary according to the signal type 
selected.
Main menu Sub-menu Options
DISPLAY
Aspect Ratio 4:3/16:9/Auto/Native
Keystone
Position
Phase
H. Size
Digital Zoom
PICTURE
Preset ModePC source: Brightest/
Presentation/Photo/Cinema/User 
1/User 2
Video source: Brightest/
Standard/Cinema/User 1/User 2
Reference...

ViewSonic                                                30                                                PJ513D/PJ513DB
Note that the menu items are available when the projector detects at least one valid 
signal. If there is no equipment connected to the projector or no signal detected, limited 
menu items are accessible.
SYSTEM 
SETUP: Basic
Language
Projector PositionFront table/Rear table/Rear 
ceiling/Front ceiling
Auto Power OffDisable/5 min/10 min/15 min/20 
min/25 min/30 min
Blank...

ViewSonic                                                31                                                PJ513D/PJ513DB 
Using the menus
The projector is equipped with On-Screen Display (OSD) menus for making various 
adjustments and settings.
There are 17 different OSD menu languages. See SYSTEM SETUP: Basic menu on 
page 34 for details.
Below is the overview of the OSD menu.
The following example describes the adjustment of Keystone.
1. Press MENU/EXIT on the projector or 
remote control to turn the...

ViewSonic                                                32                                                PJ513D/PJ513DB
DISPLAY menu
PICTURE menu
Some picture adjustments are available only when certain input sources are in use. 
Unavailable adjustments are not shown on the screen.
FUNCTION
(default setting/
value)DESCRIPTION (default setting/value)
Aspect Ratio
(Auto)
There are four options to set the images aspect ratio depending on 
your input signal source.
See Selecting the aspect ratio on page 21...

ViewSonic                                                33                                                PJ513D/PJ513DB 
SOURCE menu
ContrastAdjusts the degree of difference between dark and light in the image.
See Adjusting Contrast on page 23 for details.
Color
(0)
Adjusts the color saturation level -- the amount of each color in a 
video image. See Adjusting Color on page 24 for details.
Tint
(0)
Adjusts the red and green color tones of the image. See Adjusting 
Tint on page 24 for details....

ViewSonic                                                34                                                PJ513D/PJ513DB
SYSTEM SETUP: Basic menu
FUNCTION
(default setting / 
value)DESCRIPTION
Language
Sets the language for the On-Screen Display (OSD) menus.
Use  /  on the projector or remote control to select your desired 
language. There are 17 languages for your choice: English (default), 
French, German, Italian, Spanish, Russian, Traditional Chinese, 
Simplified Chinese, Japanese, Korean, Swedish,...