ViewSonic Projector Pj260d User Manual

ViewSonic 15 PJ260D
How to operate
1. Press the MENU button to open the OSD menu.
2. When OSD is displayed, use S / T to select any feature in the main menu.
3.After selecting the desired main menu feature, press X to enter sub-menu for 
feature setting.
4. Adjust the settings with W / X.
5. Press the MENU button, the screen will return to the main menu.
6. To exit OSD, press the MENU button again. The OSD menu will close and the 
projector will automatically save the new settings.
Picture (Computer /...

ViewSonic 16 PJ260D
Computer Image (Computer Mode)
Frequency
Adjust the timing of the projector relative to the computer.
Tracking
Adjust the phase of the projector relative to the computer.
H Position (Horizontal Position)
Adjust the image left or right within the projection area.
V Position (Vertical Position)
Adjust the image up or down within the projection area.
Video Image (Video Mode)
Color
Adjust the intensity of colors.
Sharpness
Sharpen or soften the image.
Tint
Shift colors toward red or...

ViewSonic 17 PJ260D
Lamp Counter
Display the lamp’s elapsed operating time (in hours).
Lamp Counter Reset
Reset the lamp counter to 0 hours.
Power Saving
If no operation is performed for a specific period of time, the power to the projector is 
automatically turned off.
Auto Source
Automatically scan the input source.
ECO Mode
Use this function to dim the projector lamp light output which will lower power 
consumption and increase lamp life.
High Altitude
Turning on High Altitude mode operates the fans...

ViewSonic 18 PJ260D
Maintenance
The projector needs proper maintenance. You should keep the lens clean as dust, dirt 
or spots will project on the screen and diminish image quality. If any other parts need 
replacing, contact your dealer or qualified service personnel. When cleaning any part 
of the projector, always switch off and unplug the projector first.
Warning:
Never open any of the covers on the projector. Dangerous electrical voltages inside 
the projector can cause severe injury. Do not attempt...

ViewSonic 19 PJ260D
Replacing the Lamp
As the projector operates over time, the brightness of the projector lamp gradually 
decreases and the lamp becomes more susceptible to breakage. We recommend 
replacing the lamp if a warning message is displayed. Do not attempt to replace the 
lamp yourself. Contact the qualified service personnel for replacement.
„The lamp becomes high temperature after turning off the projector with the 
power button. If you touch the lamp, you may scald your finger. When you...

ViewSonic 20 PJ260D
1. Turn off the projector.
2. Unplug the power cord.
3. Place a protective sheet (cloth) 
beneath the projector. Turn the 
projector over so you can access 
the lamp cover.
4. Loosen the screw in the lamp cover 
and remove the cover.
5. Remove the screws from the lamp 
module, raise the handle, and lift 
out the module.
6. Insert the new lamp module into the 
projector and tighten the screws.
7. Replace the lamp cover and tighten 
the screw.
8. Turn on the projector. If the lamp 
does...

ViewSonic 21 PJ260D
Specifications
Display Type Single 0.55 DLP panel
Resolution (Pixels) XGA (1024 x 768)
Brightness 2000 ANSI Lumens
Lens Manual Zoom (1.17x)
Contrast Ratio 2000:1
Screen Size 35” – 300”
Lamp 200W
I/O Connectors AC power input socket x 1, VGA In x 1, S-Video x 1, Composite 
In x 1, Audio In x 1 (3.5mm phone jack), USB x 1 (firmware 
upgrade only)
Video Compatibility NTSC, NTSC 4.43
PA L ,  PA L - N ,  PA L  M ,  
SECAM, 
HDTV (480P, 576P, 720P, 1080i) 
Composite video and S-video...

ViewSonic 22 PJ260D
Appendix
LED Indicator Messages
LED TypeColorStatusMeaning
Power LED
Lamp LEDGreen
OffFlash
-The projector is in standby mode.
Power LED
Lamp LEDGreen
RedSolid
SolidThe projector system has some problems with 
its fan, so the projector cannot start up.
Power LED
Lamp LEDGreen
OffSolid
-The lamp is in good condition and is projecting 
at maximum brightness.
Power LED
Lamp LEDAmber
RedSolid
SolidThe lamp has reached its end of life and must 
be changed soon. The lamp will continue to...

ViewSonic 23 PJ260D
Compatibility Modes
Computer: 
Video: 
 
CompatibilityResolutionH-Sync [KHz]V-S y nc  [Hz]
VGA 640 x 480 31.5 59.9
37.9 72.8
37.5 75.0
43.3 85.0
SVGA 800 x 600 35.2 56.3
37.9 60.3
48.1 72.2
46.9 75.0
53.7 85.1
XGA 1024 x 768 48.4 60.0
56.5 70.1
60.0 75.0
68.7 85.0
SXGA 1152 x 864 64.0 70.0
67.5 75.0
1280 x 960 60.0 60.0
75.0 75.0
1280 x 1024 64.0 60.0
SignalHorizontal Frequency (kHz)Vertical Frequency (Hz)
480i 15.8 kHz 60 Hz
480p 31.5 kHz 60 Hz
576i 15.6 kHz 50 Hz
576p 31.3 kHz 50...

ViewSonic 24 PJ260D
Troubleshooting
Refer to the symptoms and measures listed below before sending the projector 
forrepairs. If the problem persists, contact your local reseller or service center. Please 
refer to Indicator Messages as well.
Start-up problems
If no lights turn on:
„Be sure that the power cord is securely connected to the projector and the other end 
is plugged into an outlet with power.
„Press the power button again.
„Unplug the power cord and wait for a short while, then plug it in and...