ViewSonic Projector Pj1065 User Manual

ViewSonic  PJ10659
OPERATIONS
Power ON
1Check if the power cord is connected correctly.
2Set the power switch to [
I]. When the standby mode is selected, the POWER indicator is orange.
3Press the STANDBY/ON button on the control panel or the remote control device. The warm-up 
starts and the POWER indicator blinks green.
4The POWER indicator stops blinking and turns green when the power is on. Remove the lens 
cap.
5Adjust picture size with the ZOOM button.
6Adjust focus with the FOCUS button.
Power OFF...

10ViewSonic  PJ1065
Basic Operation
The basic operations shown in Table 3 can be performed with the supplied remote control device or 
by way of the projector’s control panel. Items indicated by (*) may be used from the control panel.
Table 3: Basic Operation
NOTE: • Use the remote control device at a distance of approximately 5 m from the sensor on the 
front of the projector, and within a range of 30 °left-right. Strong light and obstacles will interfere 
with the operation of the remote control...

ViewSonic  PJ106511
Items indicated by (*) may be used with the control panel.
Table 3: Basic Operation  (continued)
Item Description
VOLUMEVolume Adjustment: 
Press the VOLUME               button.
MUTESet/Clear Mute Mode: 
Press the MUTE button. No sound is heard in the MUTE 
mode.
AUTOAutomatic Adjustment at RGB Input: 
Press the AUTO button. Horizontal 
position(H. POSIT), vertical position (V. POSIT), clock phase (H. PHASE), and 
horizontal size(H. SIZE) are automatically adjusted. Use with the...

12ViewSonic  PJ1065
Setup Menu
The following adjustments and settings are pos-
sible when SETUP is selected at the top of the 
menu. Part of the Setup menu differs between 
RGB input and video input. Select an item with 
the      and       buttons, and start operation. Use 
the Single menu to reduce menu size (see Table 
3, MENU SELECT).
Table 4: Setup Menu
Item DescriptionRGB IN 1
RGB IN 2DVIVIDEO
S-VIDEO
COMPONENT
BRIGHTAdjustment:
 Dark             Light√√ √
CONTRASTAdjustment:
 Weak...

ViewSonic  PJ106513
Input Menu
The following functions are available when INPUT is selected on the 
menu. Select an item with the      and       buttons, and start or stop operation 
with the       and       buttons. The function indicated (**) are effective on 
video input mode, the P.IN P. window on RGB input mode.
Table 5: Input Menu
Item Description
AUTOAutomatic Adjustment at RGB Input: 
Select the EXECUTE with the      button.
Horizontal position (H.POSIT), vertical position (V.POSIT), clock phase...

14ViewSonic  PJ1065
Image Menu
The following adjustments and settings are available when IMAGE is 
selected on the menu. Select an item with the       and       buttons, and start
or stop operation with the      and       buttons.
Table 6: Image Menu
Item Description
BLANKSelect Blank Screen: 
Select the screen with the      /       button. The selected one 
(MyScreen, ORIGINAL or one colors) is displayed when the BLANK mode is ON.
MyScreen 
is a mode that the customer-customized screen is displayed....

ViewSonic  PJ106515
Options Menu
The following adjustments and settings are available when OPT. is 
selected on the menu. Select an item with the      and       buttons, and start 
operation.
Table 7: Options Menu
Item Description
VOLUMEVolume Adjustment: 
Reduce VOLUME            Increase VOLUME
MENU 
COLORSelect Menu Background Color: 
Select with the      and       buttons.
LANGUAGEOperation Start/Stop: 
Press the                button.
Select Menu Display Language: 
Select with the       and...

16ViewSonic  PJ1065
No Signal Menu
The same adjustments and settings are available as with the Image and 
Options menus when the MENU button is pressed during display of the 
“NO INPUT IS DETECTED ON***”or “SYNC IS OUT OF RANGE 
ON***”message while no signal is received.
Table 8: No Signal Menu
Item Description
VOLUMEVolume Adjustment: 
Reduce VOLUME            Increase VOLUME
• When this function is used, audio input is automatically switched to video. The 
audio input can be switched by moving the DISK...

ViewSonic  PJ106517
MAINTENANCE
Lamp
Contact your dealer before replacing the lamp.
For the lamp replacement, see the item “Optional Parts” of the Table 12.
Before replacing the lamp, switch power OFF, remove the power cord from the power outlet, and 
wait approximately 45 minutes until the lamp has cooled. The lamp may explode if handled at high 
temperatures.
WARNING: 
• For disposal of used lamp, treat according to the instruction of community authorities.
• Since the lamp is made of glass, do not...

18ViewSonic  PJ1065
Replacing the Lamp
1Switch the projector OFF, remove the power cord from the power 
outlet, and wait at least 45 minutes for the unit to cool.
2Prepare a new lamp.
3Check that the projector has cooled sufficiently, and gently turn it 
upside down.
4Loosen the screw as shown in the diagram, and remove the lamp 
cover.
5Loosen the two screws, and gently remove the lamp while holding 
the grips. Touching the inside of the lamp case may result in 
uneven coloring.
6Install the new lamp...