ViewSonic Projector Cine1000 User Manual

							T T
T
r r
r
o o
o
u u
u
b b
b
l l
l
e e
e
s s
s
h h
h
o o
o
o o
o
t t
t
i i
i
n n
n
g g
g
   
 
ViewSonic Cine1000  
35
1. Set the Frequency and Tracking settings on the Utility menu of the OSD to the default 
settings. 
2. To ensure the problem is not caused by a connected PC’s video card, connect to another 
computer.  
Problem: The image is flat with no contrast  
1. Adjust the Contrast setting on the Main menu of the OSD. 
Problem: The color of the projected image does not match the source image. 
1. Adjust the Color Temperature and Gamma settings on the Main menu of the OSD. 
Lamp Problems 
Problem: There is no light from the projector  
1. Check that the power cable is securely connected. 
2. Ensure the power source is good by testing with another electrical device. 
3. Restart the projector in the correct order and check that the Power LED is green. 
4. If you have replaced the lamp recently, try resetting the lamp connections.  
5. Replace the lamp module. 
6. Put the old lamp back in the projector and have the projector serviced. 
Problem: The lamp goes off 
1. Power surges can cause the lamp to turn off. Press the power button twice to turn off the 
projector. When the Lamp Ready LED is on, press the power button. 
2. Replace the lamp module. 
3. Put the old lamp back in the projector and have the projector serviced. 
Remote Control Problems 
Problem: The projector does not respond to the remote control  
1. Direct the remote control towards the remote sensor on the projector.  
2. Ensure the path between remote and sensor is not obstructed. 
3. Turn off any fluorescent lights in the room. 
4. Check the battery polarity of the remote control. 
5. Replace the batteries. 
6. Turn off other Infrared-enabled devices in the vicinity. 
7. Have the remote control serviced. 
Audio Problems 
Problem: There is no sound 
1. Adjust the projector volume. 
2. Adjust the volume of the audio source. 
3. Check the audio cable connection. 
4. Test the source audio output with other speakers. 
5. Have the projector serviced. 
Problem: The sound is distorted  
1. Check the audio cable connection. 
2. Test the source audio output with other speakers. 
3. Have the projector serviced.  
						

							T T
T
r r
r
o o
o
u u
u
b b
b
l l
l
e e
e
s s
s
h h
h
o o
o
o o
o
t t
t
i i
i
n n
n
g g
g
   
 
ViewSonic Cine1000  
36
Having the Projector Serviced 
If you are unable to solve the problem, you should have the projector serviced. Pack the projector in 
the original carton. Include a description of the problem and a checklist of the steps you took when 
trying to fix the problem. The information may be useful to the service personnel. Return the projector 
to the place you purchased it.  
						

							S S
S
p p
p
e e
e
c c
c
i i
i
f f
f
i i
i
c c
c
a a
a
t t
t
i i
i
o o
o
n n
n
s s
s
   
 
ViewSonic Cine1000  
37
SPECIFICATIONS 
Specifications 
 
                 480P   
Power consumption   275W Max.       
Lamp 200W 
(ECO mode 180W) 
 
 
 
 
 
 
Display type  TI DMD 0.55-inch, 12 deg. DDR   
Resolution 480P(854x480)native  
Bandwidth  Up to SXGA 1280x 1024 @ 60 Hz   
Color  16.7 Million (24-bits/pixel) 
Weight  3.55 kg (7.8 lbs) 
Projection distance  1.5 to 8 meter (4.9 to 26 feet) 
Projection screen size  0.91 to 5.9 meter (35.8inches to 232 inches) 
Projection lens  Manual zoom and focus 
Zoom ratio  1.216:1 
Vertical keystone correction  + / - 15 
Projection methods  Desktop front/rear; ceiling front/rear 
Data Compatibility  IBM PC or compatibles (VGA, SVGA), Mac 
HDTV Video 
Video compatibility  NTSC/NTSC 4.43, PAL (B/G/H/I/M/N 60), SECAM 
H-Sync  15,31 - 70 kHz 
V-Sync  50 - 85 Hz 
Safety certification  FCC Class B, UL, CUL, CE, TUV-GS, PCT, CCC, UL_AR, NOM 
Operation temperature  10° ~ 35° 
Dimensions  32.8 x 23.8 x 8.8 cm (12.9 x 9.4 x 3.5 inches) 
Standby  < 10 watts 
Noise  35dB typical  
Audio speaker  2W mono speaker 
Uniformity 80 % 
Lens cover (Diameter)  61.2 mm 
  
						

							S S
S
p p
p
e e
e
c c
c
i i
i
f f
f
i i
i
c c
c
a a
a
t t
t
i i
i
o o
o
n n
n
s s
s
   
 
ViewSonic Cine1000  
38
Input/output connectors 
DVI-I 
RGB in 
RGB out 
PC 
USB 
Composite video (RCAx1) 
S-Video (Mini-DIN) 
Video 
Component video Y,Pb/Cb,Pr/Cr (RCAx3) 
Mini-jack in 
Mini-jack out 
Audio 
Right and left in (RCAx2) 
Service/upgrades RS-232 
Security Kensington slot 
 
  
						

							S S
S
p p
p
e e
e
c c
c
i i
i
f f
f
i i
i
c c
c
a a
a
t t
t
i i
i
o o
o
n n
n
s s
s
   
 
ViewSonic Cine1000  
39
Projection Distance versus Projection Size  
A
B
C D
L  Projection  Distance
 
Max. Screen Size  Min. Screen Size  Projection 
Distance Diagonal Width Height Diagonal Width Height 
L   A C   B D 
1.5m  1.1m  0.95m 0.535m 0.89m  0.77m  0.43m 
4.92 43.5 37.5 21.1 35.8 30.5 17.1 
2m  1.47m 1.28m 0.72m  1.2m  1.04m 0.58m 
6.56 58 50.5 28.43 47.7 41 23 
2.4m  1.75m 1.527m 0.86m  1.45m  1.26m  0.71m 
7.87 69.6 60 33.8 57.2 49.85 28 
2.8m 2.05m 1.79m 1m 1.69m 1.47m 0.83m 
9.18 81.2 70.6 39.7 66.78 58 32.7 
3.2m  2.33m  20.3m 1.15m 1.93m 1.68m 0.95m 
10.5 92.8 80.18 45.1 76.32 66.5 37.4 
3.6m 2.64m 2.3m  1.3m 2.16m 1.88m 1.05m 
11.81 104.4 90.6 51 85.8 74 41.6 
4m  2.94m 2.56m 1.44m  2.4m  2.10m 1.18m 
13.12 116 101 56.8 95.4 82.8 46.6 
4.4m  3.22m 2.81m 1.58m 2.667m 2.32m 1.31m 
14.43 127.6 110.7 62.2 105 91.5 51.5 
4.8m  3.53m 3.07m 1.73m  2.9m  2.52m 1.42m 
15.74 139.2 121 68 114.5 99 55.9 
5.2m  3.81m 3.32m 1.87m 3.13m 2.72m 1.53m 
17.06 150.8 130.74 73.5 123..2 107 60.4 
5.6m  4.11m 3.58m 2.02m 3.39m 2.95m 1.66m 
18.37 162.4 141.2 79.4 133.56 116 65.5 
6m  4.42m 3.85m 2.16m 3.63m 3.16m 1.78m 
19.68 174 151.66 85.3 143.1 124.6 70.1 
8m  5.8m  5.09m 2.86m 5.00m 4.35m 2.45m 
26.24 232 200 112.7 196.72 171.4 96.4  
						

							S S
S
p p
p
e e
e
c c
c
i i
i
f f
f
i i
i
c c
c
a a
a
t t
t
i i
i
o o
o
n n
n
s s
s
   
 
ViewSonic Cine1000  
40
Timing Mode Table 
The native resolution is 800 x 600 for the SVGA series and 1024 x 768 for the XGA series. Resolu-
tion other than native mode may display with uneven size of text or lines. 
The following table shows the supported timing modes. 
Signal Resolution Frequency H.
( KHz ) 
Frequency V.
( Hz ) Video Digital Analog 
NTSC  --  15.734  60.0 Ο --  -- 
PAL / SECAM  --  15.625  50.0 Ο --  -- 
640 x 350  37.9  85.1 -- Ο  Ο 
720 x 400  31.5  70.0 -- Ο  Ο 
720 x 400  37.9  85.0 -- Ο  Ο 
640 x 480  31.5  60.0 -- Ο  Ο 
640 x 480  37.9  72.8 -- Ο  Ο 
640 x 480  37.5  75.0 -- Ο  Ο 
640 x 480  43.3  85.0 -- Ο  Ο 
800 x 600  37.9  60.3 -- Ο  Ο 
800 x 600  46.9  75.0 -- Ο  Ο 
800 x 600  48.1  72.2 -- Ο  Ο 
800 x 600  53.7  85.1 -- Ο  Ο 
1024 x 768  48.4  60.0 -- Ο  Ο 
1024 x 768  56.5  70.1 -- Ο  Ο 
1024 x 768  60.0  75.0 -- Ο  Ο 
1024 x 768  68.7  85.0 -- Ο  Ο 
VESA 
1280 x 1024 64.0 60.0 -- Ο Ο 
640 x 480  35.0  66.7 -- Ο  Ο 
832 x 624  49.7  74.5 -- Ο  Ο 
1024 x 768  60.2  74.9 -- Ο  Ο 
Apple Macintosh 
1152 x 870  68.7  75.1 -- Ο  Ο 
1920 x 1080  33.8  60.0 Ο --  -- 
1920 x 1080  28.1  50.0 Ο --  -- 
HDTV 
1280 x 720  45.0  60.0 Ο --  -- 
720 x 576  31.3  50.0 Ο --  -- SDTV 
720 x 480  31.5  60.0 Ο --  -- 
Ο Frequency supported 
-- Frequency not supported 
 For XGA series only  
						

							S S
S
p p
p
e e
e
c c
c
i i
i
f f
f
i i
i
c c
c
a a
a
t t
t
i i
i
o o
o
n n
n
s s
s
   
 
ViewSonic Cine1000  
41
Dimensions  
32.8 cm (12.9 inches)
8.8 cm (3.5 inches) 23.8 cm (9.4 inches)
  
						

							ViewSonic Cine1000  42 
Customer Support 
For technical support or product service, see the table below or contact your reseller. 
NOTE: You will need the product serial number. 
Country/Region Web site T = Telephone 
F = FAX Email 
United States  www.viewsonic.com/support/ T= (800) 688-6688 
F= (909) 468 1202 service.us@ 
viewsonic.com 
Canada  www.viewsonic.com/support/  T= (866) 463 4775 service.ca@ 
viewsonic.com 
United Kingdom  www.viewsoniceurope.com/uk  T= 0207 949 0307 service.eu@ 
viewsoniceurope.com
Europe/Middle 
East/Baltic 
countries/North 
Africa www.viewsoniceurope.com Contact your reseller service.eu@ 
viewsoniceurope.com
Australia and New 
Zealand www.viewsonic.com.au/support/ AUS= 1800 880 818 
NZ=  0800 008 822 service@au. 
viewsonic.com 
Singapore/ 
Malaysia/Thailand www.viewsonic.com.sg/support/ T= (65) 6273 4018 
F= (65) 6273 1566 service@sg. 
viewsonic.com 
South Africa/ Other 
countries www.viewsonic.com T= +886 (2) 2246-3456 
F= +886 (2) 2249-1751 service@sd. 
viewsonic.com 
Hong Kong  www.hk.viewsonic.com/  T= +852 3102 2900 service@hk. 
viewsonic.com 
Macau    T= +853 700 303   
Korea  www.viewsonic.com  Toll Free= 080 2659 080 service@kr. 
viewsonic.com 
 
 
 
 
 
 
 
 
 
 
 
  
						

							ViewSonic Cine1000  43 
Limited Warranty 
ViewSonic® Projector 
What the warranty covers: 
ViewSonic warrants its products to be free from defects in material and workmanship during the warranty period. If a product proves to be 
defective in material or workmanship during the warranty period, ViewSonic will at its sole option repair or replace the product with a like 
product. Replacement product or parts may include remanufactured or refurbished parts or components. 
How long the warranty is effective: 
North and South America: 3 years warranty for all parts excluding the lamp, 3 years for labor, and 90 days for the original lamp from the date 
of the first consumer purchase. Europe except Poland: 3 years warranty for all parts excluding the lamp, 3 years for labor, and 90 days for 
the original lamp from the date of the first consumer purchase. Poland: 2 years warranty for all parts excluding the lamp, 2 years for labor, 
and 90 days for the original lamp from the date of the first consumer purchase. Other regions or countries: Please check with your local 
dealer or local ViewSonic office for the warranty information. 
Lamp warranty subject to terms and conditions, verification and approval. Applies to manufacturer’s installed lamp only. All accessory lamps 
purchased separately are warranted for 90 days. 
Who the warranty protects: 
This warranty is valid only for the first consumer purchaser. 
What the warranty does not cover: 
1.  Any product on which the serial number has been defaced, modified or removed. 
2.  Damage, deterioration or malfunction resulting from: 
a.  Accident, misuse, neglect, fire, water, lightning, or other acts of nature, unauthorized product modification, or failure to follow 
instructions supplied with the product. 
b.  Repair or attempted repair by anyone not authorized by ViewSonic. 
c.  Any damage of the product due to shipment. 
d.  Removal or installation of the product. 
e.  Causes external to the product, such as electric power fluctuations or failure. 
f.  Use of supplies or parts not meeting ViewSonic’s specifications. 
g.  Normal wear and tear. 
h.  Any other cause which does not relate to a product defect. 
3.  Any product exhibiting a condition commonly known as “image built-in” which results when a static image is displayed on the product for 
an extended period of time. 
4.  Removal, installation, and set-up service charges. 
How to get service: 
1.  For information about receiving service under warranty, contact ViewSonic Customer Support. You will need to provide your product’s 
serial number. 
2.  To obtain warranted service, you will be required to provide (a) the original dated sales slip, (b) your name, (c) your address, (d) a 
description of the problem, and (e) the serial number of the product. 
3.  Take or ship the product freight prepaid in the original container to an authorized ViewSonic service center or ViewSonic. 
4.  For additional information or the name of the nearest ViewSonic service center, contact ViewSonic.   
Limitation of implied warranties: 
There are no warranties, express or implied, which extend beyond the description contained herein including the implied warranty of 
merchantability and fitness for a particular purpose. 
Exclusion of damages: 
ViewSonic’s liability is limited to the cost of repair or replacement of the product. ViewSonic shall not be liable for: 
1.  Damage to other property caused by any defects in the product, damaged based upon inconvenience, loss of use of the product, loss of 
time, loss of profits, loss of business opportunity, loss of goodwill, interference with business relationships, or other commercil loss, 
even if advised of the possibility of such damages. 
2.  Any other damages, whether incidental, consequential or otherwise. 
3.  Any claim against the customer by other party. 
Effect of state law: 
This warranty gives you specific legal rights, and you may also have other rights which vary from state to state. Some states do not allow 
limitations on implied warranties and/or do not allow the exclusion of incidental or consequential damages, so the above limitations and 
exclusions may not apply to you. 
Sales outside the U.S.A. and Canada:   
For warranty information and service on ViewSonic products sold outside of the U.S.A. and Canada, contact ViewSonic or your local 
ViewSonic dealer. 
 
Warranty_Projectors Rev. 1d 1 of 1 
4.3: Projector Warranty Release Date: 03-31-05