ViewSonic Pro8100 Projector User Manual

ADVANCED OPERATION
27
ENG
2-2-4 Noise Reduction
HQV technology reduces the irrelevant or noise data (Minimum loss of good data) from 
signal and creates better viewing quality. 
Use 
▲ and ▼ to navigate Selections of Noise Reduction Sub-Menu (Fig. 2-2-4).
Press 
 to confirm the Sub-Menu selection.
Press 
 to go to previous menu.
HQV-NR
ON
TNR
0
MNR
2
BAR
OFF
Fig. 2-2-4 
Noise Reduction Sub-Menu
HQV-NROFFON
To turn On or Off HQV-noise reduction. HQV NR is a per-
pixel motion & noise adaptive temporal...

282-2-5 Color Space
Select the correct color spacing for the given input video format. Wrong selection may result 
in abnormal color performance. Selections.
Use 
▲ and ▼ to navigate Selections of Color Space Sub-Menu (Fig. 2-2-5) 
Press 
 to confirm the Sub-Menu selection.
Press 
 to go to previous menu.
RGB
YCbCr
YPbPr
AUTO
Fig. 2-2-5
Color Space Sub-Menu
RGBFor RGB video format. No subsampling. 
All information is accurately transmitted.
YCbCr
For component video YCbCr video format. 
Some subsampling...

ADVANCED OPERATION
29
ENG
2-3-1 Projector Settings
Projector Setting selections
Use 
▲ and ▼ to navigate Selections of Projector Settings Sub-Menu (Fig. 2-3-1) 
Press 
 to confirm the Sub-Menu selection.
Press 
 to go to previous menu.
AUTO SOURCE
ON
FIXED SYNC
OFF
AUTO
SHUTDOWN
OFF
LAMP MODE
NORMAL
DAYLIGHT
SENSOR
AUTO
PROJECTION
FRONT/DESK
Fig. 2-3-1 
Projector Settings Sub-Menu
AUTO SOURCEOFFON
Automatically select the next active input source
Select ON to enable the feature; OFF to disable the...

302-3-2 OSD
OSD location
Use 
▲ and ▼ to navigate Selections of Projector Settings Sub-Menu (Fig. 2-3-1)
Press 
 to confirm the Sub-Menu selection.
Press 
 to go to previous menu.
TRANSPARENCY
TYPE 1
TIMEOUT LOCATION
TOP LEFT
OSD
Fig. 2-3-2 
OSD Sub-Menu
LOCATIONCENTERBOTTOM LEFTBOTTOM RIGHT
TOP RIGHTTOP LEFT
OSD location on the projected screen
Press 
◄►▲▼ to navigate and select the best position for 
OSD location.
TIMEOUT   305 100
OSD timeout timing (seconds) setting
Press 
► to expand the timeout...

ADVANCED OPERATION
31
ENG
2-3-4 Timers
Timer settings
Use 
▲ and ▼ to navigate the Timers Sub-Menu (Fig. 2-3-4) Selections.
Press 
 to confirm the Sub-Menu selection.
Press 
 to go to previous menu.
SYSTEM TIME
00100 HRS FILTER
TIMER RESET LAMP
TIMER RESET
Fig. 2-3-4
Timers Sub-Menu
YESNOLAMP TIMER RESET
Reset Lamp timer. Reset Lamp timer after each replacement of 
new lamp.
This timer is for user’s own tracking purpose; the lamp 
warranty time will not be renewed by this act. (See section ??? 
for lamp...

322-3-6 Auto Iris
Automatically control the portion of projected light to increase contrast and transition speed
Use 
▲ and ▼ to navigate Selections of Auto Iris Sub-Menu (Fig. 2-3-6).
Press 
 to confirm the Sub-Menu selection.
Press 
 to go to previous menu.
AUTO IRIS
OFF AUTO IRIS
ON
Fig. 2-3-6 
Auto Iris Sub-Menu
AUTO IRIS
OFFEnable Auto Iris feature
AUTO IRIS
ONDisable Auto Iris feature
2-4 PCS Settings Sub-Menu
PCS Setting selections
Use 
▲ and ▼ to navigate Selections of PCS Setting Sub-Menu (Fig....

ADVANCED OPERATION
33
ENG
2-4-1 PCS
PCS image management
Use 
▲ and ▼ to navigate Selections of PCS Sub-Menu (Fig. 2-4-1)
Press 
 to confirm the Sub-Menu selection.
Press 
 to go to previous menu.
PCS OFF PCS ON
USER
Fig. 2-4-1 
PCS Settings Sub-Menu
PCS ON
Enable all default PCS settings
USER
Customized PCS settings.
PCS OFF
Disable all PCS enhancement settings
2-4-2 PCS Display
PCS display selections:
Use 
▲ and ▼ to navigate Selections of PCS display Sub-Menu (Fig. 2-4-2)
Press 
 to confirm the...

342-4-3 Flesh tone
Skin tone correction
Use 
▲ and ▼ to navigate Selections of Flesh tone Sub-Menu (Fig. 2-4-3) Selections.
Press 
 to confirm the Sub-Menu selection.
Press 
 to go to previous menu.
SELECT
Fig. 2-4-3 
Flesh tone Sub-Menu
COLOR   500100
HUE   500100
EFFECTIVE
AREA0010010050
BEFORE FLESH TONE FLESH TONE AFTER
Effective Area: The affected color range adjustment.
Press 
► to increase range; press ◄ to decrease range.
Hue: Gradation adjustment of the output color
Press 
► or ◄ to adjust the...

ADVANCED OPERATION
35
ENG
2-4-5 Gamma Correction
Gamma selections and custom adjustments.
Use 
▲ and ▼ to navigate Selections of Gamma Correction Sub-Menu (Fig. 2-4-5).
Press 
 to confirm the Sub-Menu selection.
Press 
 to go to previous menu.
1.0
2.4
USER
2.2
2.0
1.8
Fig. 2-4-5 
Gamma Correction Sub-Menu
ADVANCED50
0
-50
00
-251
152
03
105
126
-157
208
154
Advanced option: 9 segments of gamma correction for 
customization.
PROFESSIONAL50
0
-50
00
-251
152
03
105
126
-157
208
154...

36
COLOR    500 100
CYAN
ENHANCEHUE      500 100
Cyan color Enhancement
Hue – Press 
► for a more bluish or ◄ for greenish tone
Color – Press 
► for richer color or ◄ for less saturated color
COLOR    500 100
MAGENTA
ENHANCEHUE     500 100
Magenta color Enhancement
Hue – Press 
► for more reddish or ◄ for bluish tone
Color – Press 
► for richer color or ◄ for less saturated color
COLOR    500 100
YELLOW
ENHANCEHUE      500 100
Yellow color Enhancement
Hue – Press 
► for a more reddish or ◄ for greenish...