ViewSonic Pled W500 Projector User Manual

10
1. Kensington™ Lock Port
2. Power Socket
3. SD Card Reader
4. USB Connector
5. HDMI Connector
6. VGA Connector (PC analog signal/HDTV/component video input)
7. S-Video Connector
8. Composite Video Input Connector
9. Audio/Video Input Connector
10. Mini USB Connector
SD CARDS-VIDEOVIDEO
AV INVGA HDMI USBMINI USB
32145678910
Connection Ports 

11
1. Power
2. HDMI
3. SD/USB
4. Keystone
5. Enter
6. Volume -
7. Four Directional Select Keys
8. Keystone
9. Menu
10. My Button
11. Previous/Rewind/Fast Forward/
Next
12. Play/Pause/Stop
13. Freeze
14. Blank
15. Auto Sync
16. Magnify +/-
17. Color Mode
18. Source
19. Aspect
20. Mute
21. Exit
22. Volume +
23. Video
24. PC
25. Laser
Remote Control
Enter
Freeze
HDMI PC
SD/USBVideo
MenuMy
ButtonExit
Color
ModeSource
BlankAspect
Auto
Sync
Magnify
PowerLaser
1
2
3
4
6
5
8
7
9
10
11
12
13
14
15
1617
23
24
20...

12
1. Power Cord
2. HDMI Cable *
3. VGA Cable 
Connecting to Computer/Notebook
Installation
 Due to the difference in applications for each country, some regions may have different accessories.
 * Optional accessory
SD CARDS-VIDEOVIDEO
AV INVGA HDMI USBMINI USB
NotebookComputer
Power socket
1
23
3
6
45
4. VGA to DVI-A Cable *
5. Audio Cable *
6. USB Cable * (Mini B type to A type) 

13
Connecting to Video Sources
1. Power Cord
2. HDMI Cable *
3. VGA to HDTV (RCA) Cable *
 Due to the difference in applications for each country, some regions may have different accessories.
 * Optional accessory
4. Audio Cable *
5. S-Video Cable *
6. Composite Video Cable *
SD CARDS-VIDEOVIDEO
AV INVGA HDMI USBMINI USB
DVD player, Set-top box, 
HDTV receiverS-Video output
DVD player Video output
1
534
26
Power socket 

14
SD CARDS-VIDEOVIDEO
AV INVGA HDMI USBMINI USB
Connecting to Multi-media Devices
1. Power Cord
2. SD Card *
 Due to the difference in applications for each country, some regions may have different accessories.
 * Optional accessory Power socket
1
2
3
Notebook
4
3. USB Flash Drive *
4. USB Cable * (Mini B type to A type) 

15
V
iewSonicMENULAMPSOURCETEMP
Powering On the Projector
1. Remove the lens cap. n
2. Securely connect the power cord and signal cable. When connected, the Power 
/(ZLOOÀDVKUHG
3. Turn on the lamp by pressing 
“ ” button on the control panel or on the remote 
control. The Power LED will turn blue. o
4. Turn on your source that you want to display on the screen (computer, note-
book, video player, etc). The projector will detect the source automatically and 
will display on the screen.
5. If you...

16
Powering Off the Projector
1. Press the “” button on the control panel or on the remote control to turn off 
the projector. The following message will be displayed on the screen. 
Press the “´EXWWRQDJDLQWRFRQ¿UP
2. The Power LED will turn red and blink rapidly after the projector is turned off. 
And the fans will continue to operate for about 30 seconds to ensure that the 
system cools properly.
 EOLQNLQJDQGWXUQ
solid red to indicate standby mode.
4. It is now safe to unplug the power...

17
Adjusting the Projector’s Height
The projector is equipped with elevator foot for adjusting the image height.
yTo raise the image:
HDQG¿QHWXQH
the display angle. n
yTo lower the image:
HDQG¿QHWXQH
the display angle. o
Adjusting the Projected Image
Elevator Foot
12
Rubber Feet 

18
Adjusting the Projector’s Focus
Focus Ring
To focus the image, rotate the focus ring until the image is clear.
Adjusting Projection Image Size
Refer to the graphics and table show as below to determine the screen size and 
projection distance.
yAdjusting the vertical image position
Projection Distance Lens CenterScreen
 Projection distance (m) = 1.4 x Screen size (m) x 0.848
Ex.: Projection distance (0.9m)=1.4 x Screen size (0.76) x 0.848
Tolerance is around 5%
Projection Distance Screen Size (16:10)...

19
User Controls
Using the Control Panel
ViewSonicMENU
LAMP
SOURCE TEMP
NameDescription
PowerTurn the projector on/off.
Menu Launch the on-screen display (OSD).
Source Select an input signal.
Four Directional 
Select Keys
selection.
Lamp LED Indicate the projector’s lamp status.
Power LED Indicate the projector’s status.
Temp LED Indicate the projector’s temperature status.