ViewSonic Pjd8333s Projector User Manual

							 24
Locking control keys
With the control keys on the projector locked, you can prevent your projector settings 
from being changed accidentally (by children, for example). When the Panel Key 
Lock is on, no control keys on the projector will operate except   Power.
1. Press Lock
 on the remote control.
2. A confirmation message is displayed. Select Ye s to confirm.
To release panel key lock:
1. Press Lock
 on the remote control.
2. A confirmation message is displayed. Select Ye s to confirm.
Important
•
If you press  Power to turn off the projector without disabling panel key lock, the 
projector will still be in locked status the next time it is turned on.
•Keys on the remote control are still functional when panel key lock is enabled. 
						

							 25
Setting the presentation timer
The presentation timer can indicate the presentation time on the screen to help you 
achieve better time management when giving presentations. Follow these steps to 
utilize this function:
1. Press Timer on the remote control to access the Presentation Timer menu or go to
the Option > Presentation Timer menu and  press   to display the Presentation
Timer page.
2. Highlight Timer Period and decide the timer period by pressing  / .
3. Press 
 to highlight Display Timer and choose if you want the timer to show up
on the screen by pressing  /  .
4. Press   to highlight Timer Position and set the timer position by pressing  /
.
Top-Left→Bottom-Left→Top-Right→Bottom-Right
5. Press
  to highlight Timer Counting Direction and select your desired counting
direction by pressing 
/.
6. To activate the presentation timer, highlight Start Counting and select Start
Counting. You will see the message displaying on the screen. 
7. To cancel the timer, go to the Option > Presentation Timer > Start Counting
menu and highlight Off.
SelectionDescription
Always Displays the timer on screen throughout the presentation time.
1 Min/2 Min/3 Min  Displays the timer on screen in the last 1/2/3 minute(s).
Never Hides the timer throughout the presentation time.
SelectionDescription
Count Up Increases from 0 to the preset time.
Count Down Decrease from the preset time to 0. 
						

							 26
Menu operation
The projector has multilingual on-screen display menus that allow you to make image
adjustments and change a variety of settings.
How to operate
1. Press MENU/EXIT on the projector or Menu on the remote control to open the
OSD menu.
2. When OSD is displayed, use  /  to select any feature in the main menu.
3. After selecting the desired main menu item, press   to enter sub-menu for feature
setting.
4. Use  /  to select the desired item and adjust the settings with  / .
5. Press MENU/EXIT on the projector or Menu on the remote control, the screen will
return to the main menu.
6. Press MENU/EXIT twice* on the projector or Exit on the remote control to leave
and save the settings.
*The first press leads you back to the main menu and the second press closes the 
OSD menu. 
						

							 27
Menu tree
Main Menu Sub Menu Settings
PictureColor Mode RGB: Brightest / PC / Movie / ViewMatch / User1 / 
User2 / White Board / Black Board / Green Board
Video: Brightest / Game / Movie / ViewMatch / 
User1 / User2 / White Board / DICOM SIM / Green 
Board
Reference Mode RGB: Brightest / PC / Movie / ViewMatch
Video: Brightest / Game / Movie / ViewMatch
Brightness 0 - 100
Contrast 0 - 100
Color SettingColor Temp. User / Cool / Normal / Warm
Red Gain 0 - 100
Green Gain 0 - 100
Blue Gain 0 - 100
User ColorColor Red / Green / Blue / Cyan / 
Magenta / Yellow
Hue -99 - +100
Saturation 0 - 199
Gain 0 - 199
White Intensity 0 - 10
Gamma 1 - 8
Aspect RatioXGA: Auto/ 4:3/ 16:9 /  Wide
WXGA: Auto/ 4:3/ 16:9 / 16:10* / Anamorphic
* 16:10 only for PJD7533w / PJD8633ws model
Dynamic Mode On / Off
Keystone -40 - +40
3D Settings3D Sync On / Off
3D Format Auto / Frame Sequential / 
Frame Packing / Top-Bottom / 
Side-by-Side 
3D Invert On / Off
Video/AudioFrequency 0 - 31
Tracking -5 - +5
H Position -10 - +10
V Position -10 - +10
Zoom 0 - +5
Video SettingSharpness 0 - 31
Tint 0 - 100
Saturation 0 - 100
Audio SettingVo l u m e 0  -  1 0
Mute On / Off
Audio in 2 Audio In / Microphone In
Microphone 
Vo l u m e0 - 10 
						

							 28
SettingProjector 
ProjectionFront-Table / Front-Ceiling / Rear-Table / Rear-
Ceiling
Menu SettingMenu Position Top-Left / Top-Right / Center / 
Bottom-Left / Bottom-Right
Menu Display Time 5 - 60 Sec
OSD Transparency Off - 90
HDMI Format DVI: RGB Enhance / RGB Normal / YCbCr
HDMI: Auto / RGB Full / RGB limited / YCbCr
HDMI Range Normal / Enhance 
Blank Screen Black / Red / Green / Blue / Cyan / Yellow / Magenta 
/ White
Start up Screen Start up Screen Off(Black) / ViewSonic / Blue
Message On / Off
Auto Source On / Off
Auto Power Off  Off - 60 Minute
Sleep Timer Off -12 Hours
Standby SettingNetwork On / Off
Active VGA Out On / Off
Active Audio Out On / Off
Quick Power Off On / Off
Smart Restart On / Off
DC12V  On / Off
LAN Control 
SettingWired LANStatus Disconnect / 
Connect
DHCP On / Off
Projector IP address
Subnet Mask
Default Gateway
DNS Server
Apply
Wireless LANStatus
SSID
IP Address
Connection Mode
Network Restart Restrat / Cancel 
						

							 29
OptionClosed Caption Off/ CC1~CC4/ T1~T2
PasswordChange Password Input new 
passwordConfirm 
password 
Password Yes / No
Password Delete Input 
currently 
passwordPassword Delete
Ye s / N o
Presentation 
TimerTimer Period 0 - 240 Min
Display Timer Always / 1 Min / 2 Min / 3 Min / 
Never
Timer Position Top-Left / Bottom-Left / Top-
Right / Bottom-Right
Timer Counting 
DirectionCount Down / Count Up
Start Counting Start Counting / OFF
High Altitude On / Off
Lamp SettingLamp Hours
Lamp Hours Reset Yes / No
Eco Mode On / Off
Dynamic Eco 
Timer (RC)Off / 5 / 10 / 15 / 20 / 25 / 30 
min
My ButtonBrightness / Contrast / Color Setting / Projector 
Projection / Menu Position / 3D Setting / Eco Mode / 
Dynamic Mode / OSD Transparency / Closed 
Caption / Auto Power Off / Sleep Timer / Auto 
Source
Pattern Off / 1 / 2 / 3 / 4 / 5 / User
CEC On / Off
Factory Default Yes / No
Language
InformationInput Source
Resolution
H. Frequency
V. Frequency
Lamp Hours
Mac Address 
						

							 30
Picture
Color Mode
There are many factory presets optimized for various types of images.
• Brightest: Maximizes the brightness of the projected image. This mode is suitable 
for environments where extra-high brightness is required.
• PC: Is designed for presentations under daylight environment to match PC and 
notebook coloring.
• Game: Is appropriate for playing games.
• Movie: Is appropriate for playing colorful movies. This mode is suitable for viewing 
in a blackened (little light) environment
• ViewMatch: Switches between high brightness performance and accurate color 
performance.
• User 1:Memorize user 1 defined settings.
• User 2:Memorize user 2 defined settings.
• White Board:For white projection screen type.
• DICOM SIM:.Recommended for DICOM format files in simulation mode.
• Green Board:For green projection screen type.
Note
•
DCIM SIM option is only for training or reference. It  not used for actual diagnosis.
•DICOM represents for the Digital Imaging and Communications in Medicine. This is a 
standard created by the American College of Radiology and the National Electrical 
Manufacturers Association. This standard specifies the method of digital image data to 
be transferred from one system to another.
Reference Mode
Select a picture mode that best suits your need for the image quality and further fine-
tune the image. This function is only available when User 1 or User 2 is selected.
• Brightest: Maximizes the brightness of the projected image. This mode is suitable 
for environments where extra-high brightness is required.
• PC: Is designed for presentations under daylight environment to match PC and 
notebook coloring.
• Game: Is appropriate for playing games. 
• Movie: Is appropriate for playing colorful movies. This mode is suitable for viewing 
in a blackened (little light) environment
• ViewMatch: Switches between high brightness performance and accurate color 
performance.
Brightness
Brighten or darken the image.
Contrast
Set the difference between light and dark areas. 
						

							 31
Color Setting
Adjust the color temperature. At higher temperature the screen looks colder; at lower
temperature, the screen looks warmer. If you select “User”, then you can change the
intensity of each of 3 color (Red Gain, Green Gain, Blue Gain) to customize user color
temperature.
User Color
User Color provides six sets (RGBCMY) of colors to be adjusted. When you select
each color, you can independently adjust its range, hue, saturation and gain according
to your preference.
White Intensity
Increase the brightness of white areas.
Gamma
Effect the represent of dark scenery. With greater gamma value, dark scenery will look
brighter.
Aspect Ratio
Select how the picture fits on the screen:
• Auto:  Scales an image proportionally to fit the projectors native resolution in its 
horizontal or vertical width. You want to make most use of the screen without 
altering the source image’s aspect ratio.
•4:3: 
    Scales an image so that it is displayed in the center of the screen with a 4:3 
aspect ratio.
• 16:9: 
  Scales an image so that it is displayed in the center of the screen with a 16:9 
aspect ratio.
• 16:10: 
  Scales an image so that it is displayed in the center of the screen with a 
16:10 aspect ratio.
• Wide / Anamorphic: 
 Minimizes the aspect ratio distortion by maintaining close to 
the original aspect ratio in the center of the image and distributing the majority of 
distortion at the edges of the displayed image.
Note
•
Wide for XGA model; Anamorphic for WXGA model.
•16:10 only for PJD7533w / PJD8633ws model .
Dynamic Mode
Choose “On” to dim the projector lamp which will automatically detect the brightness
level of the content and reduce lamp power consumption (up to 70 percent). Choose
“Off” to turn off Dynamic Mode.
Note
•
When Dynamic Mode is “On”, Eco Mode will be gray out.
Keystone
Manually correct distorted images resulting from an angled projection.
Press Keystone   /   on the projector or remote control to display the Keystone 
correction page. 
Press   to correct keystone at the top of the image. 
Press   to correct keystone at the bottom of the image. 
						

							 32
3D Settings
This projector features a 3D function which enables you to enjoy the 3D movies, vid-
eos, and sporting events in a more realistic way by presenting the depth of the
images. You need to wear a pair of 3D glasses to view the 3D images.
3D Sync
When you discover the inversion of the image depth, enable this function to correct
the problem.
3D Format
Use this function to choose an appropriate 3D format if the projector cannot recognize
the 3D format.
If the 3D signal is input from an HDMI 1.4a compatible device, the projector detects
the signal for 3D Sync information and once detected, it projects images in 3D format
automatically. In other cases, you may need to manually select a 3D Sync format for
the projector to project 3D images correctly.
Note
•
3D Format will be available when 3D Sync is “On”.
•The default setting is “Auto” when input source is HDMI.
•The default setting is “Side-by-Side” when input source is video or computer. “Auto” 
will be unavailable.
•The brightness level of the projected image will decrease.
•The Color Mode cannot be adjusted.
3D Invert
• On: Invert left and right frame contents.
• Off: Default frame contents.
Video/Audio
Frequency
Adjust the timing of the projector relative to the computer.
Note
•
This functions is only supported under computer mode.
Tracking
Adjust the phase of the projector relative to the computer.
Note
•
This functions is only supported under computer mode. 
H Position (Horizontal Position)
Adjust the image left or right within the projection area.
V Position (Vertical Position)
Adjust the image up or down within the projection area. 
						

							 33
Zoom
Using the remote control
1. Press Magnify on the remote control to display the Zoom bar.
2. Press  /  to magnify the picture to a desired size. 
3. Press “Enter” on the projector or remote control to switch to the paning mode and 
press the directional arrows to navigate the picture. The zoom bar needed to be 
shown on screen if we want to switch the paning mode.
4. To reduce size of the picture, press Magnify and press   repeatedly until it is 
restored to the original size.
Using the OSD menu
1. Press MENU/EXIT on the projector or Menu on the remote control and then press 
 until the Video/Audio menu is highlighted.
2. Press   to highlight Zoom.
3. Repeat steps 2-4 in the section of Using the remote control above.
Video Setting
Allow you to enter the Video Setting menu.
• Sharpness: Sharpen or soften the image.
• Tint: Shift colors toward red or green.
• Saturation: Adjust a video image from black and white to fully saturated color.
Audio Setting
Allow you to enter the Audio Setting menu.
• Volume: Adjust the projector’s volume level.
• Mute: Toggles the projector audio between on and off.
• Audio In: Switch Audio in 2 function for Audio in or Microphone in function.
• Microphome Volume: Adjust the microphone’s volume level.
Setting
Projector Projection
Adjust the picture to match the orientation of the projector: upright or upside-down, in
front of or behind the screen. Invert or reverse the image accordingly.
Menu Setting
Allow you to enter the Menu Setting menu.
• Menu Position: Choose the menu location on the display screen.
• Menu Display Time: Duration of OSD menu display countly starts (at idle state by 
second).
• OSD Transparency: Select to change the transparency level of the OSD 
background.
HDMI Format
Selects appropriate HDMI format automatically or manually.