ViewSonic Pjd6381 Projector User Manual

							
ViewSonic
®
IMPORTANT:  Please read this User Guide to obtain important information on install-
ing  and  using  your  product  in  a  safe  manner,  as  well  as  registering  your  product  for 
future  service.    Warranty  information  contained  in  this  User  Guide  will  describe  your 
limited  coverage  from  ViewSonic  Corporation,  which  is  also  found  on  our  web  site 
at  http://www.viewsonic.com  in  English,  or  in  specific  languages  using  the  Regional 
selection box in the upper right corner of our website.
“Antes de operar su equipo lea cuidadosamente las instrucciones en es\
te manual”
- User Guide
- Guide de l’utilisateur
- Bedienungsanleitung
- Guía del usuario
- Guida dell’utente
- Guia do usuário
- Användarhandbok
- Käyttöopas
- Руководство пользователя
- 使用手冊 (繁體)
- 使用手冊 (簡體)
- 사용자 안내서
- คู่มือการใช้งาน
- Podręcznik użytkownika
- Kullanιcι kιlavuzu
PJD6381
DLP Projector
Model No. : VS12416 
						

							
Compliance Information
FCC Statement
This device complies with part 15 of FCC Rules. Operation is subject to \
the following two conditions: (1) this device may not cause harmful interference, and (2) this dev\
ice must accept any interference received, including interference that may cause undesired operation.This equipment has been tested and found to comply with the limits for a\
 Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses, and can radiate radio frequency energy, and if not installed and used in accordance with the instructions, may\
 cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful inter\
ference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:
    • Reorient or relocate the receiving antenna.
    •  Increase the separation between the equipment and receiver.
    •    Connect the equipment into an outlet on a circuit different from that to which the receiver is 
connected.
    •  Consult the dealer or an experienced radio/TV technician for help.
Warning: You are cautioned that changes or modifications not expressly approved by the party responsible for compliance could void your authority to operate th\
e equipment.
For Canada    • This Class B digital apparatus complies with Canadian ICES-003.
    •  Cet appareil numérique de la classe B est conforme à la norme NMB-\
003 du Canada.
CE Conformity for European Countries
The device complies with the EMC Directive 2004/108/EC and Low Voltage Directive 2006/95/EC.
Following information is only for EU-member states:The mark is in compliance with the Waste Electrical and Electronic Equipment Directive 2002/96/EC (WEEE).The mark indicates the requirement NOT to dispose the equipment including any spent or discarded batteries or accumulators as unsorted municipal waste, but use\
 the return and collection systems available.
If the batteries, accumulators and button cells included with this equip\
ment, display the 
chemical symbol Hg, Cd, or Pb, then it means that the battery has a heav\
y metal content of more than 0.0005% Mercury or more than, 0.002% Cadmium, or more than 0.0\
04% Lead. 
						

							
Important Safety Instructions
1.  Read these instructions.
2.   Keep these instructions.
3.   Heed all warnings.
4.   Follow all instructions.
5.   Do not use this unit near water.
6.     Clean with a soft, dry cloth.
7.  
 
Do not block any ventilation openings. Install the unit in accordance wi\
th the 
manufacturer’s instructions.
8.     Do not install near any heat sources such as radiators, heat registers, stoves, or other 
devices (including amplifiers) that produce heat.
9.     Do not defeat the safety purpose of the polarized or grounding-type plug. A polarized 
plug has two blades with one wider than the other. A grounding type plug has two 
blades and a third grounding prong. The wide blade and the third prong are provided 
for your safety. If the provided plug does not fit into your outlet, consult an electrician 
for replacement of the obsolete outlet.
10.     Protect the power cord from being walked on or pinched particularly at plugs. 
Convenience receptacles and the point where they exit from the unit. Be \
sure that the 
power outlet is located near the unit so that it is easily accessible.
11.     Only use attachments/accessories specified by the manufacturer.
12.    
Use only with the cart, stand, tripod, bracket, or table specified by the 
manufacturer, or sold with the unit. When a cart is used, use caution when 
moving the cart/unit combination to avoid injury from tipping over.
13.     Unplug this unit when unused for long periods of time.
14.     Refer all servicing to qualified service personnel. Servicing is req uired when the unit 
has been damaged in any way, such as: if the power-supply cord or plug is damaged, 
if liquid is spilled onto or objects fall into the unit, if the unit is \
exposed to rain or 
moisture, or if the unit does not operate normally or has been dropped. 
						

							
Declaration of RoHS Compliance
This product has been designed and manufactured in compliance with Direc\
tive 2002/95/EC of the 
European Parliament and the Council on restriction of the use of certain\
 hazardous substances in 
electrical and electronic equipment (RoHS Directive) and is deemed to \
comply with the maximum 
concentration values issued by the European Technical Adaptation Committee (TAC) as shown below: 
SubstanceProposed Maximum 
ConcentrationActual Concentration
Lead (Pb)0.1%< 0.1%
Mercury (Hg)0.1%< 0.1%
Cadmium (Cd)0.01%< 0.01%
Hexavalent Chromium (Cr6+)0.1%< 0.1%
Polybrominated biphenyls (PBB)0.1%< 0.1%
Polybrominated diphenyl ethers (PBDE)0.1%< 0.1%
Certain components of products as stated above are exempted under the Annex of the RoHS Directives 
as noted below:
Examples of exempted components are:
1.  Mercury in compact fluorescent lamps not exceeding 5 mg per lamp and in other lamps not 
specifically mentioned in the Annex of RoHS Directive.
2. 
 
Lead in glass of cathode ray tubes, electronic components, fluorescent tubes, and electronic ceramic 
parts (e.g. piezoelectronic devices).
3. 
 
Lead in high temperature type solders (i.e. lead-based alloys containin\
g 85% by weight or more lead).
4. 
 
Lead as an allotting element in steel containing up to 0.35% lead by wei\
ght, aluminium containing up 
to 0.4% lead by weight and as a cooper alloy containing up to 4% lead by\
 weight.

EN-1 
						

							
Copyright Information
Copyright© ViewSonic® Corporation, 2009. All rights reserved.
Macintosh and Power Macintosh are registered trademarks of Apple Inc.
Microsoft, Windows, Windows NT, and the Windows logo are registered trademarks of Microsoft 
Corporation in the United States and other countries.
ViewSonic, the three birds logo, OnView, ViewMatch, and ViewMeter are registered trademarks of 
ViewSonic Corporation.
VESA is a registered trademark of the Video Electronics Standards Association. DPMS and DDC are 
trademarks of VESA.
PS/2,  VGA and XGA are registered trademarks of International Business Machines Corporation.
Disclaimer: ViewSonic Corporation shall not be liable for technical or editorial erro\
rs or omissions 
contained herein; nor for incidental or consequential damages resulting \
from furnishing this material, or 
the performance or use of this product.
In the interest of continuing product improvement, ViewSonic Corporation reserves the right to change 
product specifications without notice. Information in this document may change without notice.
No part of this document may be copied, reproduced, or transmitted by an\
y means, for any purpose 
without prior written permission from ViewSonic Corporation.
Product RegistrationTo meet your future needs, and to receive any additional product information as it becomes available, please 
register your product on the Internet at: www.viewsonic.com. The ViewSonic® Wizard CD-ROM also 
provides an opportunity for you to print the registration form, which yo\
u may mail or fax to ViewSonic.
For Your Records
Product Name:
Model Number:
Document Number:
Serial Number:
Purchase Date:
PJD6381
ViewSonic DLP Projector
VS12416
PJD6381_UG_ENG Rev. 1A 06-18-09
_______________________________
_______________________________
The lamp in this product contains mercury.
Please dispose of in accordance with local, state or federal laws.

EN-2 
						

							EN-3
Notes on the AC Power Cord
AC Power Cord must meet the requirement of countries where you use this projector.
Please confirm your AC plug type with the graphics below and ensure that the proper
AC Power Cord is used. If the supplied AC Power Cord does not match your AC outlet,
please contact your sales dealer. This projector is equipped with a grounding type AC
line plug. Please ensure that your outlet fits the plug. Do not defeat the safety purpose
of this grounding type plug. We highly recommend using a video source device also
equipped with a grounding type AC line plug to prevent signal interference due to
voltage fluctuations.
Ground 
						

							EN-4  
CONTENTS
Introduction ........................................................................................................5
Projector Features ....................................................................................................... 5
Package Contents  ....................................................................................................... 6
Projector Overview  ...................................................................................................... 7
Using the Product ........................................................................................ 9
Control Panel  .............................................................................................................. 9
Connection Ports ....................................................................................................... 10
Remote Control  ......................................................................................................... 11
Installing the Batteries  ............................................................................................... 12
Remote Control Operation  ........................................................................................ 13
Installation ........................................................................................................14
Connecting the Projector ........................................................................................... 14
Powering On/Off the Projector  .................................................................................. 15
Adjusting the Projector  .............................................................................................. 16
Menu Operation  ............................................................................................ 18
Network Control  ......................................................................................... 25
Maintenance .................................................................................................. 40
Cleaning the Lens  ..................................................................................................... 40
Cleaning the Projector Housing  ................................................................................ 40
Cleaning the Filter Cover  .......................................................................................... 40
Replacing the Lamp  .................................................................................................. 41
Specifications ............................................................................................... 43
Appendix ........................................................................................................... 44
LED Indicator Messages  ........................................................................................... 44
Compatibility Modes  .................................................................................................. 45
Troubleshooting ........................................................................................................ 47
RS-232 Command and Configuration  ....................................................................... 48
IR Control Code  ........................................................................................................ 50 
						

							EN-5
Introduction
Projector Features
The projector integrates high-performance optical engine projection and a user - friendlydesign to deliver high reliability and ease of use.
The projector offers the following features:
„Single chip 0.55 Texas Instruments DLP® technology
„XGA (1024 x 768 pixels)
„Auto image re-sizing (Auto-Sync.) to 1024 x 768 full screen with scaling 
compression compatibility for VGA, SVGA, XGA and SXGA*
„Compatibility with Macintosh® computers
„Compatibility with NTSC, PAL, SECAM and HDTV
„D-Sub 15-pin terminal for analog video connectivity
„User-friendly, multi-language on-screen display
„Advanced electronic keystone correction
„RS-232 connector for serial control
„RJ-45 connector for networked control
„The information in this manual is subject to change without notices.„The reproduction, transfer or copy of all or any part of this document is not 
permitted without express written consent. 
						

							 EN-6
Package Contents
When you unpack the projector, make sure you have all these components:
Optional accessories
Projector with Lens Cap AC Power Cord Remote Control (IR) & batteries
Projector Carrying Case VGA Cable (D-SUB to D-
SUB)ViewSonic CD 
WizardQuick Start 
Guide
Filter cover
P/N: P4R34-4600-00RS232 cable
P/N: J2552-0208-00RGB to component adapter
P/N: J2552-0212-00
„Contact you dealer immediately if any items are missing, appear damaged, or if
the unit does not work.„Save the original shipping carton and Packing material; they will come-in handy 
if you ever to ship your unit. for maximum protection, repack your unit as it was 
originally packed at the factory. 
						

							EN-7
Projector Overview
Front View
Lens cap Filter cover
Elevator button Speaker
Lens cap strap Focus ring
Projection lens Control panel
Front IR remote control sensor Lamp cover
Ventilation holes (intake)
11109
1354762
8
17
28
39
410
511
6