ViewSonic Pjd6253 Projector User Manual

46
PJLink™, SNMP, AMX and Xpanel formats supported
This projector is PJLink™, SNMP V.1, AMX or Xpanel V1.10 compliant. For details,  please follow its user guide or website resp ectively to control and manage projectors.
Using the projector in standby mode
Some of the projector functions are available in standby mode (plugged in but not turned  on). To use these functions, be sure you have turned on the corresponding menus under SYSTEM SETUP: Basic  > Standby Settings, and the cable connections are...

47
Menu operation
Menu system
Please note that the on-screen display (OSD) menus vary according to the signal type  selected. 
The menu items are available when the projector  detects at least one valid signal. If there is  no equipment connected to the projector or no signal detected, limited menu items are accessible.
Main menu Sub-menu Options
1.  
DISPLAY
Screen Color Off/Blackboard/ 
Greenboard/Whiteboard 
Aspect Ratio Auto/4:3/16:9/ 
16:10 (PJD6553w only) Keystone 
Position
Phase 
H. Size 
Zoom
3D...

48
Main menu Sub-menu Options
3. SOURCE
Quick Auto Search Off/On 
Color Space Conversion RGB /YUV/Auto (PJD6223/ 
PJD6253/PJD6553w only) 
Smart Eco Timer Disable/5 min/10 min/15  min/30 min 
Smart Restart Off/On 
Pattern PJD5126: Off/On PJD6223/PJD6253: 01/02/03/04/05 
PJD6553w: 01/02/03/04 
My Button 
Projection (Projector Position)/3D Sync/Lamp  Mode/DCR/Closed Caption/Auto Off (Auto Power  
Off)/Message/Screen Color/Splash Screen/
Information
4.  
SYSTEM 
SETUP: 
Basic
Language 
Projector Position...

49
Main menu Sub-menu Options
5.  
SYSTEM 
SETUP: 
Advanced
High Altitude Mode On/Off 
DCR On/Off 
Audio Settings Mute On/Off 
Volume 
Menu Settings 
Menu Display  
Time 
5 sec/10 sec/15 sec/20 sec/25  
sec/30 sec 
Menu Position Center/Top-Left/Top-Right/ Bottom-Left/Bottom-Right 
Closed Caption 
Closed Caption  
Enable On/Off 
Caption Version CC1/CC2/CC3/CC4 
Lamp Settings 
Lamp Mode Normal/Economic 
Reset Lamp Timer
Equivalent Lamp Hour 
Presentation  Timer 
Timer Period 1~240 minutes 
Timer Display...

50
Description of each menu
Function Description
Screen ColorCorrects the projected picture’s color when the projection surface  is not white. See  Using Screen Color on page 33 for details.
Aspect RatioThere are three options to set the images aspect ratio depending  on your input signal source. See  Selecting the aspect ratio on  page 30  for details.
KeystoneCorrects any keystoning of the image. See Correcting keystone  on page 29  for details.
Position
Displays the position adjustment page. To move...

51
Function Description
Color ModePre-defined picture modes are provided so you can optimize your  projector image set-up to suit your program type. See  Selecting a  picture mode on page 32  for details.
Reference  
Mode
Selects a picture mode that most suits your need for the image  quality and further fine-tune the image based on the selections listed on the same page below. See  Setting the User 1/User 2  mode on page 33  for details.
BrightnessAdjusts the brightness of the image. See Adjusting...

52
Function Description
LanguageSets the language for the On-Screen Display (OSD) menus. See  Using the menus on page 23  for details.
Projector  
Position
The projector can be installed on  a ceiling or behind a screen, or  with one or more mirrors. See  Choosing a location on page 12  for details.
Auto Power  
Off
Allows the projector to turn of f automatically if no input signal  is detected after a set period of time. See  Setting Auto Power  Off on page 56  for details.
Blank TimerSets the image...

53
Function Description
Audio  
Settings
The sound adjustments made as below will have an effect on the  projector speaker. Be sure you ha ve made a correct connection to  the projector audio input/output jacks. See  Connection on page  16  for more details. 
Mute 
Mutes the sound received from  AUDIO IN 1 and AUDIO IN 2  (L/R) . 
Volume 
Adjusts the sound level received from  AUDIO IN 1 and AUDIO  IN 2 (L/R) .
Menu  
Settings
Menu Display Time 
Sets the length of time the OSD will remain active after...

54
Function Description
Security  
SettingsSee  Utilizing the password function on page 24 for details.
Remote  
Control CodeSee  Remote control code on page 9 for details.
Reset All  
Settings
Returns all settings to the factory preset values.
The following settings will still remain: Phase, H. Size, User  1, User 2, Language, Project or Position, High Altitude  Mode, Security Settings.
Current  
System 
Status
Source 
Shows the current signal source. 
Color Mode 
Shows the selected mode in the  PICTURE...

55
Maintenance
Care of the projector
Your projector needs little maintenance. The only thing you need to do on a regular basis is  to keep the lens clean. 
Never remove any parts of the projector except  the lamp. Contact your dealer if other parts  need replacing.
Cleaning the lens
Clean the lens whenever you not ice dirt or dust on the surface. 
• Use a canister of compressed air to remove dust. 
• If there is dirt or smears,  use lens-cleaning paper or moisten a soft cloth with lens  
cleaner and...