ViewSonic Pjd6223 Projector Specifications

6
Shipping contents
Carefully unpack and verify that you have all of the items shown below. If any of these 
items are missing, please contact your place of purchase.
Standard accessories
The supplied accessories will be suitable for your region, and may differ from those 
illustrated.
Optional accessories
1. Replacement lamp
2. Soft carry case
3. VGA-Component adapterProjector Power Cord VGA Cable
Multi-language user manual 
DVDQuick Start GuideRemote Control & 
Batteries
PJD5123p/PJD6223/...

7
Projector exterior view
1. External control panel
(See Projector on page 8 for 
details.)
2. Lamp cover
3. Vent (heated air exhaust)
4. Quick-release button
5. Lens cover
6. Focus and Zoom ring
7. Front IR remote sensor
8. Projection lens
9. Type B USB port
10. RJ45 LAN input port
11. RS-232 control port
12. HDMI port
13. RGB signal output socket
14. RGB (PC)/Component video 
(YPbPr/YCbCr) signal input 
socket-1/2
15. S-Video input socket
16. Video input socket
17. Audio signal input socket
Audio...

8
Controls and functions
Projector
1. Focus ringAdjusts the focus of the projected image.
2. Zoom ring
Adjusts the size of the image.
3. Keystone/Arrow keys ( / Up,  / Down)
Manually corrects distorted images 
resulting from an angled projection.
4. Left/Blank Hides the screen picture.
5. POWER indicator light
Lights up or flashes when the projector is 
under operation.
POWER
Toggles the projector between standby 
mode and on.
6. SOURCE
Displays the source selection bar.
7. Top IR remote sensor
Not...

9
Remote control
To use the remote mouse control 
keys (Page Up, Page Down,  , and
 
), see Using the remote mouse 
control on page 11  for details.
1. POWER
Toggles the projector between standby 
mode and on.
2. Source selection keys (VGA 1/VGA  2/Video)
Selects an input source for display.
Video/
Performs the same function as the 
right mouse button when the mouse 
mode is activated.
3. Source
Displays the source selection bar.
4. Keystone keys ( / )
Manually corrects distorted images 
resulting from...

10
Remote control code
The projector can be assigned to two different remote control codes, A or B. When several 
adjacent projectors are in operation at the same time, switching the remote control codes 
can prevent interference from other remote controls. Set the remote control code for the 
projector first before changing that for the remote control.
To switch the code for the projector, select A or B in the SYSTEM SETUP: Advanced > 
Remote Control Code menu. 
To switch the code for the remote...

11
Using the remote mouse control
The capability of operating your computer with the remote control gives you more 
flexibility when delivering presentations. 
1. Connect the projector to your PC or notebook with a USB cable prior to using the 
remote control in place of your computer’s mouse. See Connecting a computer on 
page 18 for details.
2. Set the input signal to D-Sub / Comp. 1, D-Sub / Comp. 2 or HDMI.
3. Press Mouse on the remote control to switch from the normal mode to the mouse 
mode. An...

12
Replacing the remote control batteries
1. To open the battery cover, turn the remote control over to view its back, push on the 
finger grip on the cover and slide it in the direction of the arrow as illustrated. The 
cover will slide off.
2. Remove any existing batteries (if necessary) and install two AAA batteries observing 
the battery polarities as indicated in the base of the battery compartment. Positive (+) 
goes to positive and negative (-) goes to negative.
3. Refit the cover by aligning it...

13
Positioning your projector
Choosing a location
Your room layout or personal preference will dictate which installation location you select. 
Take into consideration the size and position of your screen, the location of a suitable power 
outlet, as well as the location and distance between the projector and the rest of your 
equipment.
Your projector is designed to be installed in one of four possible installation locations:
1. Front Table
Select this location with the projector placed near 
the floor...

14
Projection dimensions
Refer to Dimensions on page 65 for the center of lens dimensions of this projector before 
calculating the appropriate position.
The screen mentioned below refers to the projection screen usually consisting of a surface 
and a support structure
PJD5123p/PJD6223/RC6/SD7/PJD6253/PV731/FP586
PJD5123p/PJD6223/RC6/SD7
(a) Screen 
Size
[inch (m)]4:3 image on a 4:3 Screen 16:9 image on a 4:3 Screen
(b) Projection 
distance [m (inch)](c) Image 
height
[cm (inch)](d) Vertical 
offset
[cm...

15
PJD6253/PV731/FP586
(a) Screen 
Size
[inch (m)]4:3 image on a 4:3 Screen 16:9 image on a 4:3 Screen
(b) Projection 
distance [m (inch)](c) Image 
height
[cm (inch)](d) Vertical 
offset
[cm (inch)] (b) Projection distance 
[m (inch)](c) Image 
height
[cm (inch)(d) Vertical 
offset
[cm (inch)]
min. max. min. max.
40(1.0) 1.2 (48) 1.6 (63) 61 (24) 5 (1.8) 1.2 (48) 1.6 (63) 46 (18) 12.2 (4.8)
50(1.3) 1.5 (61) 2.0 (79)  76 (30) 6 (2.3) 1.5 (61)  2.0 (79)  57 (23) 15.2 (6.0)
60(1.5) 1.8 (73) 2.4 (94)  91...