ViewSonic Pjd5234 Projector User Manual

23
Menu tree
Main Menu Sub Menu Settings
PictureColor Mode Brightest / PC / Movie / ViewMatch / User1 / User2 / 
White Board / Black Board / Green Board
Reference Mode Brightest / PC / Movie / ViewMatch
Brightness 0 - 100
Contrast 0 - 100
Color SettingColor Temp. User/ Cool / Normal / Warm
Red Gain 0 - 100
Green Gain 0 - 100
Blue Gain 0 - 100
User ColorColor Red / Green / Blue /Cyan / 
Magenta / Yellow
Hue -99 - +100
Saturation 0 - 199
Gain 0 - 199
White Intensity 0 - 10
Gamma 1 - 8
Aspect Ratio Auto /...

24
SettingProjection Front-Table / Front-Ceiling / Rear-Table / Rear-Ceiling
Menu SettingMenu Position Top-Left / Top-Right / Center / Bot-
tom-Left / Bottom-Right
Menu Display 
Time5 - 60 Sec
OSD Transpar-
encyOff - 90
HDMI Format Auto / RGB / YCbCr; YPbPr
HDMI Range Enhanced / Normal
Blank Screen Black / Red / Green / Blue / Cyan / Yellow / Magenta / 
White
Start up Screen Enter ViewSonic / Blue / Black
Message On / Off
Auto Source On / Off
Auto Power Off  Off~30 Minutes
Sleep Timer Off~12 Hours...

25
Note
• HDMI settings is only for PJD5234.
OptionClosed Caption Off/ CC1~CC4/ T1~T2
PasswordChange Pass-
wordInput new pass-
wordConfirm pass-
word 
Password Yes / No
Password Delete Input currently 
passwordPassword Delete
Ye s / N o
Presentation 
TimerPresentation 
TimerOn / Off
Timer Period 0 - 240 Min
Display Timer Always / 1 Min / 2 Min / 3 Min / 
Never
Timer Position Top-Left / Bottom-Left / Top-Right / 
Bottom-Right
Timer Counting 
DirectionCount Down / Count Up
High Altitude On / Off
Lamp...

26
Picture
Color Mode
There are many factory presets optimized for various types of images.
• Brightest: Maximizes the brightness of the projected image. This mode is suitable 
for environments where extra-high brightness is required.
• PC: Is designed for presentations under daylight environment to match PC and 
notebook coloring.
• Movie: Is appropriate for playing colorful movies. This mode is suitable for viewing 
in a blackened (little light) environment
• ViewMatch: Switches between high brightness...

27
White Intensity
Increase the brightness of white areas.
Gamma
Effect the represent of dark scenery. With greater gamma value, dark scenery will look 
brighter.
Aspect Ratio
Select how the picture fits on the screen:
• Auto:  Scales an image proportionally to fit the projector's native resolution in its 
horizontal or vertical width. You want to make most use of the screen without 
altering the source image’s aspect ratio.
• 4:3:   Scales an image so that it is displayed in the center of the screen...

28 • The default setting is “Auto” when input source is HDMI.
• The default setting is “Side-by-Side” when input source is video or computer. “Auto” 
will be unavailable.
• The brightness level of the projected image will decrease.
• The Color Mode cannot be adjusted.
•3D Invert
• On: Invert left and right frame contents.
• Off: Default frame contents.
Video/Audio
Frequency
Adjust the timing of the projector relative to the computer.
Note
• This functions is only supported under computer mode.
Tracking...

29
• Tint: Shift colors toward red or green.
• Saturation: Adjust a video image from black and white to fully saturated color.
Audio Setting
Allow you to enter the Audio Setting menu.
• Volume: Adjust the projector’s volume level.
• Mute: Toggles the projector audio between on and off.
Setting
Projection
Adjust the picture to match the orientation of the projector: upright or upside-down, in 
front of or behind the screen. Invert or reverse the image accordingly.
Menu Setting
Allow you to enter the Menu...

30
Allows the projector to turn off automatically if no input signal is detected after a set 
period of time.
Sleep Timer
No matter whether the projector detect signal or not, the projector will turn off 
automatically when the countdown has finished.
Standby Setting
• Green Mode: Enable this function when power consumption is under 0.5W.
Note
• When Green Mode is “On”, Active VGA Out and Active audio out  will be gray out.
• Active VGA Out: Set whether the VGA OUT function works when the projector is in...

31
My Button
Allow user to define a short cut key on the remote control, and the function item is 
selected in OSD menu.
Pattern
Display embedded test pattern.
Factory Default
Restore settings to factory default.
Note
• The following settings will still remain: Keystone, Password, Projection, High Altitude 
and Language.
Language
Select the language used by the on-screen menu.
Information
Input Source
Display the current input source.
Resolution
Display current input source resolution.
H. Frequency...

32
Maintenance
The projector needs proper maintenance. You should keep the lens clean as dust, dirt 
or spots will project on the screen and diminish image quality. If any other parts need 
replacing, contact your dealer or qualified service personnel. When cleaning any part 
of the projector, always switch off and unplug the projector first.
Warning
• Never open any of the covers on the projector. Dangerous electrical voltages inside the 
projector can cause severe injury. Do not attempt to service this...