ViewSonic Pj862 Projector User Manual
Here you can view all the pages of manual ViewSonic Pj862 Projector User Manual. The ViewSonic manuals for Projector are available online for free. You can easily download all the documents as PDF.
Page 21
17 ViewSonic PJ862 Operating Operating Adjusting the volume 1. Press the VOLUME button on the remote control. A dialog will appear on the screen to aid you in adjusting the volume. 2. Use the cursor buttons ▲/▼ to adjust the volume. To close the dialog and complete the operation, press the VOLUME button again. Even if you don’t do anything, the dialog will automatically disappear after a few seconds. Temporarily muting the sound 1. Press the MUTE button on the remote control. A dialog will...
Page 22
18 ViewSonic PJ862 Operating Adjusting the zoom and focus 1. Use the zoom knob to adjust the screen size. 2. Use the focus ring to focus the picture. Adjusting screen with ONE-TOUCH 1. Press the ONE TOUCH button on the remote control. This activates the following functions at one time. Signal search: Projector will cycle through its input ports in order to find any input signal. The search is started from the current port. Then when an input is found, the projector will stop searching and...
Page 23
19 ViewSonic PJ862 Operating Using the automatic adjustment feature 1. Press the AUTO button on the remote control. At a RGB signal The vertical position, the horizontal position, the clock phase and horizontal size will be automatically adjusted. Make sure that the application window is set to its maximum size prior to attempting to use this feature. A dark picture may still be incorrectly adjusted. Use a bright picture when adjusting. At a video signal The video format best suited...
Page 24
20 ViewSonic PJ862 Using the magnify feature 1. Press the ON button of MAGNIFY on the remote control. The “MAGNIFY” indication will appear on the screen (although the indication will disappear in several seconds with no operation), and the projector will enter the MAGNIFY mode. 2. Use the cursor buttons ▲/▼ to adjust the zoom level. To move the zoom area, press the POSITION button in the MAGNIFY mode, then use the cursor buttons ▲/▼/◄/► to move the area. And to finalize the zoom area,...
Page 25
21 ViewSonic PJ862 Freezing the screen 1. Press the FREEZE button on the remote control. The “FREEZE” indication will appear on the screen, and the projector will enter the FREEZE mode. To exit the FREEZE mode and restore the screen to normal, press the FREEZE button again. ● The projector automatically exits the FREEZE mode when the input signal changes, or when one of the projector’s buttons or the remote control buttons of STANDBY/ON, ONE TOUCH, RGB, VIDEO, BLANK, AUTO,ASPECT, VOLUME,...
Page 26
22 ViewSonic PJ862 Operating the computer screen CAUTION ►Mistaken use of the mouse/keyboard control could damage your equipment. • While using this function, please connect only with a computer . • Before connecting, read the manuals of the computer you will connect. NOTE • It may not be possible to control notebook PC, and other computers with built-in pointing device (e.g. track ball), using this remote control. In this case, before connecting go into BIOS (system setup) and select...
Page 27
23 ViewSonic PJ862 Operating STANDBY/ONVIDEOUPDOWNBLANK ASPECTPUSH LASERINDICA TOR LASER RGB ENTER ONOFF ESCPOSITIONMAGNIFYMUTEKEYSTONEFREEZEONE TOUCH AUTO PA GE MENURESETVOLUME Multifunctional settings Using the menu function This projector has the following menus: PICTURE, IMAGE, VIDEO Qlty ., INPUT, SETUP, SCREEN, OPTION, NETWORK and EASY MENU. Each of these menus is operated using the same methods. The basic operations of these menus are as follows. 1. Press the MENU button on the remote...
Page 28
24 ViewSonic PJ862 Multifunctional settings EASY Menu ItemDescription ASPECTUsing the buttons ◄/► switches the mode for aspect ratio. See the item ASPECT of section IMAGE menu(29). MODE Using the buttons ◄/► switches the mode of picture type. The modes of picture type are combinations of a mode of GAMMAand a mode of COLOR TEMP.Choose a suitable mode according to the projected source. NORMAL CINEMA DYNAMIC NORMAL: (COLOR TEMP = MIDDLE) + (GAMMA = #1 DEFAULT)CINEMA: (COLOR TEMP = LOW) +...
Page 29
25 ViewSonic PJ862 Multifunctional settings ItemDescription MIRRORUsing the buttons ◄/► switches the mode for mirror status. See the item MIRROR of section SETUP menu(34). RESET Performing this item resets all of the items of EASY MENU except FILTER TIME and LANGUAGE. A dialog is displayed to make sure. Selecting RESET using the button ▲ performs reset. FILTER TIME Performing this item resets the fi lter timer which counts use time of air fi lter.A dialog is displayed to make sure. Selecting RESET...
Page 30
26 ViewSonic PJ862 Multifunctional settings PICTURE Menu ItemDescription BRIGHTUsing the buttons ▲/▼ adjusts the brightness. : Light Dark CONTRASTUsing the buttons ▲/▼ adjusts the contrast. : Strong Weak GAMMA Using the buttons ▲/▼ switches the GAMMA mode. #1 DEFAULT #1 CUSTOM #2 DEFAULT #3 CUSTOM#3 DEFAULT #2 CUSTOM To adjust #1 CUSTOM, #2 CUSTOM or #3 CUSTOM Selectinga mode of CUSTOMand then pressing the button ► or the ENTER button displays a dialog to aid you in adjusting the...