ViewSonic Pj766d Projector User Manual
Have a look at the manual ViewSonic Pj766d Projector User Manual online for free. It’s possible to download the document as PDF or print. UserManuals.tech offer 617 ViewSonic manuals and user’s guides for free. Share the user manual or guide on Facebook, Twitter or Google+.
i - User Guide - Guide de lutilisateur - Bedienungsanleitung - Guía del usuario - 使用手冊 - 使用手冊 Model No. : VS11200 ViewSonic ® PJ766D DLP Projector
ViewSonic PJ766D i Compliance Information For U.S.A. This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) The device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses, and can radiate radio frequency energy, and if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures: • Reorient or relocate the receiving antenna. • Increase the separation between the equipment and receiver. • Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. • Consult the dealer or an experienced radio/TV technician for help. FCC Warning To assure continued FCC compliance, the user must use grounded power supply cord and the cables which are included with the equipment or specified. Also, any unauthorized changes or modifications not expressly approved by the party responsible for compliance could void the users authority to operate this device. For Canada This Class B digital apparatus complies with Canadian ICES-003. Cet appareil numérique de la classe B est conforme à la norme NMB-003 du Canada. For European Countries CE Conformity The device complies with the requirements of the EEC directive 89/336/EEC as amended by 92/31/EEC and 93/68/EEC Art.5 with regard to “Electromagnetic compatibility,” and 73/23/EEC as amended by 93/68/EEC Art.13 with regard to “Safety.” User Information for all Countries Notice: Use the cables which are included with the unit or specified
ViewSonic PJ766D ii Important Safety Information Congratulations on purchasing the DLP projector! Important: It is strongly recommended that you read this section carefully before using the projector. These safety and usage instructions will ensure that you enjoy many years safe use of the projector. Keep this manual for future reference. Symbols Used Warning symbols are used on the unit and in this manual to alert you of hazardous situations. The following boxes are used in this manual to alert you to important information. Note: Provides additional information on the topic at hand. Important: Provides additional information that should not be overlooked. Caution: Alerts you to situations that may damage the unit. Warning: Alerts you to situations that may damage the unit, create a hazardous environment, or cause personal injury. Throughout this manual, component parts and items in the OSD menus are denoted in bold font as in this example: “Push the Menu button on the remote control to open the Main menu.” Main Features • Lightweight unit, easy to pack away and transport • Compatible with all major video standards including NTSC, PAL, and SECAM • A high brightness rating allows for presentations in daylight or in lit rooms • Supports resolutions up to SXGA at 16.7 million colors to deliver crisp, clear images • Flexible setup allows for front rear and ceiling projection • Line-of-vision projections remain square, with advanced keystone correction for angled projections • Input source automatically detected
ViewSonic PJ766D iii General Safety Information ¾ Do not open the unit case. Aside from the projection lamp, there are no user-serviceable parts in the unit. For servicing, contact qualified service personnel. ¾ Follow all warnings and cautions in this manual and on the unit case. ¾ The projection lamp is extremely bright by design. To avoid damage to eyes, do not look into the lens when the lamp is on. ¾ Do not place the unit on an unstable surface, cart, or stand. ¾ Avoid using the system near water, in direct sunlight, or near a heating device. ¾ Do not place heavy objects such as books or bags on the unit. Power Safety ¾ Only use the supplied power cord. ¾ Do not place anything on the power cord. Place the power cord where it will not be in the way of foot traffic. ¾ Remove the batteries from the remote control when storing or not in use for a prolonged period. Replacing the Lamp ¾ Replacing the lamp can be hazardous if done incorrectly. ¾ Unplug the power cord. ¾ Allow the lamp sufficient time to cool. Cleaning the Projector ¾ Unplug the power cord before cleaning. ¾ Allow the lamp sufficient time to cool. About this manual This manual is intended for end users and describes how to install and operate the DLP projector. Wherever possible, relevant information—such as an illustration and its description—has been kept on one page. This printer-friendly format is both for your convenience and to help save paper and thereby protect the environment. It is suggested that you only print sections that are relevant to your needs.
ViewSonic PJ766D iv Copyright Information Copyright © ViewSonic® Corporation, 2006. All rights reserved. Macintosh and Power Macintosh are registered trademarks of Apple Computer, Inc. Microsoft, Windows, Windows NT, and the Windows logo are registered trademarks of Microsoft Corporation in the United States and other countries. ViewSonic, the three birds logo, OnView, ViewMatch, and ViewMeter are registered trademarks of ViewSonic Corporation. VESA is a registered trademark of the Video Electronics Standards Association. DPMS and DDC are trademarks of VESA. PS/2, VGA and XGA are registered trademarks of International Business Machines Corporation. Disclaimer: ViewSonic Corporation shall not be liable for technical or editorial errors or omissions contained herein; nor for incidental or consequential damages resulting from furnishing this material, or the performance or use of this product. In the interest of continuing product improvement, ViewSonic Corporation reserves the right to change product specifications without notice. Information in this document may change without notice. No part of this document may be copied, reproduced, or transmitted by any means, for any purpose without prior written permission from ViewSonic Corporation. Product Registration To meet your future needs, and to receive any additional product information as it becomes available, please register your product on the Internet at: www.viewsonic.com. The ViewSonic Wizard CD-ROM also provides an opportunity for you to print the registration form, which you may mail or fax to ViewSonic. For Your Records Product Name: Model Number: Document Number: Serial Number: Purchase Date: PJ766D ViewSonic DLP Projector VS11200 PJ766D -1_UG_ENG Rev.1A 01-12-06 The lamp in this product contains mercury. Please dispose of in accordance with local, state or federal laws.
ViewSonic PJ766D v Table of contents GETTING STARTED .......................................................................................................................................................... 1 PACKING CHECKLIST........................................................................................................................................................... 1 VIE WS OF PROJECTOR PARTS............................................................................................................................................... 2 Front-left view................................................................................................................................................................. 2 Top view—OSD buttons and LEDs ................................................................................................................................. 3 Rear view—connectors ................................................................................................................................................... 5 Bottom view..................................................................................................................................................................... 7 REMOTE CONTROL PARTS................................................................................................................................................... 8 REMOTE CONTROL OPERATING RANGE............................................................................................................................. 10 PROJECTOR AND REMOTE CONTROL BUTTONS.................................................................................................................. 10 SETUP AND OPERATION ............................................................................................................................................... 11 INSERTING THE REMOTE CONTROL BATTERIES................................................................................................................. 11 CONNECTING INPUT DEVICES............................................................................................................................................ 12 STARTING AND SHUTTING DOWN THE PROJECTOR............................................................................................................. 13 ADJUST THE ZOOM, FOCUS AND KEYSTONE...................................................................................................................... 15 ADJUSTING THE VOLUME.................................................................................................................................................. 16 ON-SCREEN DISPLAY MENU SETTINGS................................................................................................................... 17 ON-SCREEN DISPLAY MENU CONTROLS............................................................................................................................ 17 Navigating the OSD ...................................................................................................................................................... 17 Setting the OSD Language ............................................................................................................................................ 18 Main Menu .................................................................................................................................................................... 19 Setup Menu ................................................................................................................................................................... 21 Advance Feature ........................................................................................................................................................... 22 User Color .................................................................................................................................................................... 23 Config Menu ................................................................................................................................................................. 25 Utility Menu .................................................................................................................................................................. 26 Language Menu ............................................................................................................................................................ 27 Status Menu................................................................................................................................................................... 28 MAINTENANCE AND SECURITY ................................................................................................................................. 29 REPLACING THE PROJECTION LAMP................................................................................................................................... 29 Resetting the Lamp........................................................................................................................................................ 30 CLEANING THE PROJECTOR................................................................................................................................................ 31 Cleaning the Lens ......................................................................................................................................................... 31 Cleaning the Case ......................................................................................................................................................... 32 USING THE KENSINGTON LOCK......................................................................................................................................... 32 TROUBLESHOOTING ..................................................................................................................................................... 33 COMMON PROBLEMS AND SOLUTIONS................................................................................................................................33 TIPS FOR TROUBLESHOOTING............................................................................................................................................ 33 LED ERROR MESSAGES..................................................................................................................................................... 34 IMAGE PROBLEMS.............................................................................................................................................................. 34 LAMP PROBLEMS............................................................................................................................................................... 35 REMOTE CONTROL PROBLEMS.......................................................................................................................................... 35 AUDIO PROBLEMS.............................................................................................................................................................. 35 HAVING THE PROJECTOR SERVICED.................................................................................................................................. 36 SPECIFICATIONS............................................................................................................................................................. 37 SPECIFICATIONS................................................................................................................................................................. 37 Input/output connectors ................................................................................................................................................ 38 PROJECTION DISTANCE VERSUS PROJECTION SIZE............................................................................................................. 39 TIM ING MODE TABLE........................................................................................................................................................ 40 DIMENSIONS...................................................................................................................................................................... 41
ViewSonic PJ766D 1 GETTING STARTED Packing Checklist Carefully unpack the projector and check that the following items are included: DLP PROJECTOR WITH LENS CAP REMOTE CONTROL ( WITH TWO AAA BATTERIES) 250V POWER CABLE USB CABLE S-VIDEO CABLE COMPUTER CABLE (DVI- DB15) CD-ROM (THIS USER’S MANUAL) MULTI-LANGUAGE QUICK START GUIDE CARRYING CASE Contact your dealer immediately if any items are missing, appear damaged, or if the unit does not work. Caution: 1. Avoid using the projector in dusty environments. 2. Leave the power cable plugged in (for 5-10 minutes) until the projector returns to room temperature before placing the projector inside the soft case. Placing the projector into the case soon after switching off the power could cause the projector to break down. Be sure to attach the lens cap and place the projector into the soft case.
G G G e e e t t t t t t i i i n n n g g g S S S t t t a a a r r r t t t e e e d d d — — — V V V i i i e e e w w w s s s o o o f f f P P P r r r o o o j j j e e e c c c t t t o o o r r r P P P a a a r r r t t t s s s ViewSonic PJ766D 2 Views of Projector Parts Front-left view 123 4 5 6 7 8 ITEM LABEL DESCRIPTION SEE PAGE: 1. Zoom Enlarges the projected image 15 2. See OSD buttons and LEDs below 3 3. Projection lamp cover Remove when changing lamp 29 4. IR receiver Receiver for IR signal from remote control 8 5. Lens/focus Remove cover, turn the lens to focus 15 6. Height adjuster Adjusters drop down when adjuster button is pushed 7. Height adjuster button Push to release height adjuster 14 8. Speaker Built-in mono speaker Important: Grill openings on the projector allow for good air circulation, which keeps the projector lamp cool. Do not obstruct any of the grill openings.
G G G e e e t t t t t t i i i n n n g g g S S S t t t a a a r r r t t t e e e d d d — — — V V V i i i e e e w w w s s s o o o f f f P P P r r r o o o j j j e e e c c c t t t o o o r r r P P P a a a r r r t t t s s s ViewSonic PJ766D 3 Top view—OSD buttons and LEDs VOL -KEYSTONE MENU POWER READY SOURCE POWER AUTO VOL + 12 3 4 5 7 6 8 9 10 11 ITEM LABEL DESCRIPTION SEE PAGE: 1. Volume/ left cursor Decreases volume Navigates and changes settings in the OSD 16,17 Keystone/ Up cursor Corrects image-trapezoid (narrower top) effect Navigates and changes settings in the OSD 15, 17 Orange Lamp ready—you can safely turn on or off the projector2. Ready (LED) Flashing Lamp not ready—do not press the power button 3. Power Turns the projector on or off (main power switch must be turned on first, see item 8 on page 5) 13 Green Unit is powered on and working correctly Off Unit is powered off 4. Power (LED) Flashing Operational error code (refer to “LED Error Messages” on page 34) 5. Source Detects the input device 13 6. Volume/ right cursor Increases volume Navigates and changes settings in the OSD 16, 17
G G G e e e t t t t t t i i i n n n g g g S S S t t t a a a r r r t t t e e e d d d — — — V V V i i i e e e w w w s s s o o o f f f P P P r r r o o o j j j e e e c c c t t t o o o r r r P P P a a a r r r t t t s s s ViewSonic PJ766D 4 ITEM LABEL DESCRIPTION SEE PAGE: 7. Auto Optimizes image size, position, and resolution 8. Menu Opens/exits the On-Screen Display (OSD) 9. Enter Changes settings in the OSD 17 10. Keystone/ Down cursor Corrects image-trapezoid (narrower bottom) effect Navigates and changes settings in the OSD 15, 17