ViewSonic Pj759 Projector User Manual

ViewSonic
26PJ758/PJ759/PJ760
PICTURE Menu
PICTURE MenuPICTURE Menu
Item Description
BRIGHTNESSUsing the ▲/▼ buttons adjusts the brightness.
Light 
Ù Dark
CONTRASTUsing the ▲/▼ buttons adjusts the contrast.
Strong 
Ù Weak
GAMMAUsing the ▲/▼ buttons switches the gamma mode.
To adjust the CUSTOM modes, see To adjust CUSTOM function 
in GAMMA and COLOR TEMP (
		28).
COLOR TEMPUsing the ▲/▼ buttons switches the color temperature mode.
To adjust the CUSTOM modes, see To adjust CUSTOM function 
in GAMMA and...

ViewSonic
27PJ758/PJ759/PJ760
Item Description
SHARPNESSUsing the ▲/▼ buttons adjusts the sharpness.
Strong 
Ù Weak
• There may be some noise and/or the screen may fl icker for a 
moment when an adjustment is made. This is not a malfunction.
MY MEMORYThis projector has 4 memories for adjustment data (for all the items 
of PICTURE menu).
Selecting a function using the ▲/▼ buttons and pressing the ► or 
ENTER button performs each function.
LOAD-1 
Ù LOAD-2 
Ù LOAD-3 
Ù LOAD-4
SAVE-4 
ÙSAVE-3 
Ù SAVE-2 
Ù...

ViewSonic
28PJ758/PJ759/PJ760
PICTURE Menu
To adjust CUSTOM function in GAMMA and COLOR TEMP
Selecting a mode whose name includes 
CUSTOM in GAMMA or COLOR TEMP item 
and then pressing the ► button or ENTER 
button displays a dialog to aid you in adjusting 
the mode.
Choose an item using the ◄/► buttons, and 
adjust the level using the ▲/▼ buttons.
• When this function is performed, lines or other 
distortion may appear.
You can display a test pattern on the top of the screen for 
checking the effect of...

ViewSonic
29PJ758/PJ759/PJ760
IMAGE Menu
IMAGE MenuIMAGE Menu
Item Description
ASPECTUsing the ▲/▼ buttons switches the mode for aspect ratio. 
For a computer signal
NORMAL 
Ù 4:3 
Ù 16:9 
Ù SMALL
         
For a video signal, s-video signal or component video signal
4:3 
Ù 16:9 
Ù 14:9 
Ù SMALL
     
For no signal
4:3 (fi xed)
• This item can be selected only for a proper signal.
• NORMAL mode keeps the original aspect ratio setting.
OVER SCANUsing the ▲/▼ buttons adjusts the over-scan ratio.
Large (It...

ViewSonic
30PJ758/PJ759/PJ760
IMAGE Menu
Item Description
H PHASE
Using the ▲/▼ buttons adjusts the horizontal phase to eliminate fl icker.
Right 
Ù Left
• This item can be selected only for a computer signal or component 
video signal.
H SIZEUsing the ▲/▼ buttons adjusts the horizontal size.
Large 
Ù Small
• This item can be selected only for a computer signal.
• When this adjustment is excessive, the picture may not be 
displayed correctly.  In such a case, please reset the adjustment by 
pressing the...

ViewSonic
31PJ758/PJ759/PJ760
INPUT Menu
INPUT MenuINPUT Menu
Item Description
PROGRESSIVEUsing the ▲/▼ buttons switches the progress mode.
TV 
Ù FILM 
Ù TURN OFF
• This function is performed only for an interlaced signal of a video, 
s-video or component video of 525i (480i) or 625i (576i) signal.
• When TV or FILM is selected, the screen image will be sharp. 
FILM adapts to the 2-3 Pull-Down conversion system. But these 
may cause a certain defect (for example, jagged line) of the picture 
for a quick...

ViewSonic
32PJ758/PJ759/PJ760
Item Description
VIDEO FORMATThe video format for S-VIDEO port and VIDEO port can be set.
(1) Use the ◄/► buttons to select the input port.
(2)  Using the ▲/▼ buttons switches the mode 
for video format.
AUTO  
Ù  NTSC  
Ù  PAL  
Ù  SECAM 
      N-PAL 
Ù M-PAL 
Ù NTSC4.43 
• This item is performed only for a video signal 
from VIDEO port or S-VIDEO port. 
• The AUTO mode automatically selects the optimum mode.
• The AUTO operation may not work well for some signals. If the...

ViewSonic
33PJ758/PJ759/PJ760
INPUT Menu
Item Description
RESOLUTIONThe resolution for the COMPUTER IN1 and IN2 input signals can 
be set on this projector.
(1) In INPUT menu select RESOLUTION using the ▲/▼ buttons 
and press the ► button.
The RESOLUTION menu will be displayed.
(2) In the RESOLUTION menu, select 
the resolution you wish to display using 
the ▲/▼ buttons. 
Selecting AUTO will set a resolution 
appropriate to the input signal.
(3) STANDARD
Pressing the ► or ENTER button when 
selecting a...

ViewSonic
34PJ758/PJ759/PJ760
SETUP Menu
SETUP MenuSETUP Menu
Item Description
AUTO 
KEYSTONE 
EXECUTESelecting this item performs the automatic keystone distortion 
correction. Projector automatically corrects vertical keystone 
distortion due to the (forward/backward) setup angle by itself.
This function will be executed only once when selected in the menu. 
When the slant of the projector is changed, execute this function 
again.
• The adjustable range for correction will vary among inputs. For 
some...

ViewSonic
35PJ758/PJ759/PJ760
SETUP Menu
SETUP Menu (continued)
Item Description
WHISPERUsing the ▲/▼ buttons turns off/on the whisper mode.
NORMAL 
Ù WHISPER
• When WHISPER is selected, acoustic noise and screen brightness 
are reduced.
MIRRORUsing the ▲/▼ buttons switches the mode for mirror status.
NORMAL 
Ù H:INVERT 
Ù V:INVERT 
Ù H&V:INVERT
 
If the Transition Detector is TURN ON and MIRROR status is 
changed, Transition Detector Alarm (
		49) will be displayed when 
projector is restarted after the...