ViewSonic Pj750 Projector User Manual

User Guide
Guide de l’utilisateur
Bedienungsanleitung
(International Spanish)
(Brazilian Portuguese)
(Italian)
(Swedish)
(Finnish)
(Russian)
(Polish)
(Japanese)
(Traditional Chinese)
(Simplified Chinese)
(Korean)
(Arabic)
PJ750
Image Size 31” – 300”
LCD Projector
PJ750
MENU
MUTERESETINPUT STANDBY/ON
LAMP
TEMP
LAMP 

ViewSonic  PJ750i
E
N
G
L
I
S
H
Contents
For Your Records ............................................................................ 1
Getting Started
Package Contents ........................................................................... 2
Important Safety Warnings .............................................................. 3
Projector Components ..................................................................... 3
Setting up the Projector...

iiViewSonic  PJ750
E
N
G
L
I
S
H
Figures
Figure: 1  Package Contents .........................................................................................2
Figure: 2  ViewSonic  PJ750 Projector ..........................................................................3
Figure: 3  System Setup ................................................................................................5
Figure: 4  Recommended Projector Distances..............................................................6
Figure:...

ViewSonic  PJ7501
E
N
G
L
I
S
H
Copyright © ViewSonic Corporation, 2001. All right reserved. 
Macintosh, Mac and Power Macintosh are registered trademarks of Apple Computer, Inc.
Microsoft, Windows, Windows NT, and the Windows logo are registered trademarks of Microsoft 
Corporation in the United States and other countries. 
ViewSonic, the three birds logo and OnView are registered trademarks of ViewSonic Corporation. 
VESA and SVGA are registered trademarks of the Video Electronics Standards...

ViewSonic  PJ7503
E
N
G
L
I
S
H
Important Safety Warnings
 Unplug the projector immediately if you detect an abnormal smell or see smoke.
 Do not look directly into the lighted lens; doing so will cause severe eye injury.
Do not look directly at the laser beam or point the laser at a person’s eyes. Doing so can 
cause serious vision problems.
Keep small children away from the projector. Children can be severely burned by the hot lens. 
Also, children are more likely to look directly into the lens.
...

4ViewSonic  PJ750
E
N
G
L
I
S
H
Setting up the Projector
1Connect the Power Cord and Input/Output Devices.
Make sure that you have properly connected the power and input cables before turning on the 
projector. See “Connecting Input and Output Devices” on page 5.
2Remove the lens cap.
3Turn on the Projector.
Tu r n  on  t h e  Power Switch on the side of the projector. The power indicator (LED) lights a 
steady orange. See “Using The Projector” on page 8.
4Press the Standby/On button.
The power LED...

ViewSonic  PJ7505
E
N
G
L
I
S
H
Connecting Input and Output Devices
Use the diagrams below as guides when connecting your input and output devices to the ViewSonic 
PJ750 projector.
The lines in the figure below demonstrate how various input devices can be connected to the 
ViewSonic PJ750 projector. For specific connection instructions, refer to the user guide for your 
input device.
Figure 3: System Setup
Air Vent
(exhaust) Remote control
sensor
Rear foot
adjustorRGB IN 1 RGB IN 2
CONTROL
RGB OUT USB...

6ViewSonic  PJ750
E
N
G
L
I
S
H
Positioning the Projector
Place the projector on a level table-top or other flat and stable surface. Refer to Figure 4 below to 
determine the optimal placement distance from the screen.
To adjust the size of the projected area, refer to the following table. The table shows minimum and 
maximum distances from the screen that you can place the projector to achieve a specific screen size. 
All distances are given in inches.
Figure 4: Recommended Projector Distances
Table 1:...

ViewSonic  PJ7507
E
N
G
L
I
S
H
Adjusting the Projector Angle
Adjust the projector angle using the foot adjusters shown in Figure 5 below. See also Keystone under 
Input Menu on page 11.
1Press the release button to lower the front foot, then tilt the projector up as shown in Figure 5 
below. 
The front foot adjusts the vertical height of the projected image.
2Release the button to lock the front foot in place.
3Rotate the rear foot adjuster to align the image.
The rear foot adjusts the horizontal...