ViewSonic Pj650 Projector User Manual

ViewSonic  PJ65018
Adjusting the Image Position
1
Press the POSITION button
As illustrated on the right, a dialog box will appear on the screen to aid you in adjusting the position.
2
Use the 
, , ,  buttons to adjust the position
When you want to initialize the position, press the RESET button during adjustment.
Press the POSITION button again to close the dialog box and complete this operation. (Even if you dont 
do anything, the dialog box will automatically disappear after a few seconds.)
This...

19ViewSonic  PJ650
Using the Automatic Adjustment Feature
1
Press the AUTO button
2
Automatic Adjustment for RGB Input
Horizontal position (H. POSIT), vertical position (V. POSIT), clock phase (H. PHASE) and horizontal size 
(H. SIZE) are automatically adjusted.
Make sure that the application window is set to its maximum size prior to attempting to use this feature.
Dark pictures may still be incorrectly adjusted. Use a bright screen when adjusting.
3
Automatic Adjustment for Video Input
The signal type...

ViewSonic  PJ65020
Correcting Keystrone Distortions
1
Press the KEYSTONE button
As illustrated on the right, a dialog box will appear on the screen to aid you in correcting the distortion.
2
Use the 
,  buttons to select the direction of distortion to correct (   )
3
Use the 
,  buttons to correct the distortion
Press the KEYSTONE button again to close the dialog box and complete this operation. (Even if you dont 
do anything, the dialog box will automatically disappear after a few seconds.)
NOTE:
• This...

21ViewSonic  PJ650
Using the Magnify Feature
1
Press the MAGNIFY (ON) button
The projector enters MAGNIFY mode.
2
Press the POSITION button, then use the 
, , , 
 buttons to 
select the area to enlarge and then press the POSITION button again to confirm 
your selection.
3
Press the 
,  buttons to zoom in and out of the selected area.
Press the MAGNIFY (OFF) button to exit MAGNIFY mode and restore the screen to normal. (The 
projector will also automatically exit MAGNIFY mode if there is a change in the...

ViewSonic  PJ65022
Signal Searching
1
Press the SEARCH button
When you press the SEARCH button, the projector begins searching for input signals. If it detects an input 
signal, the search will cease and the projector will project the detected signal. If the projector is unable to find 
an input signal at any of its ports, it will return to the state it was in prior to the search.
Selecting the Aspect Ratio
1
Press the ASPECT button
RGB IN 1, RGB IN 2, COMPONENT VIDEO
(HDTV signals : 1125i (1035i/1080i),...

23ViewSonic  PJ650
Using the Menu Functions
1
Press the MENU button
The menu display appears on the screen. The projector has the following menus: MAIN, PICTURE 1, 
PICTURE 2, INPUT, SCREEN, and OPTION.
Select a menu using the 
 /  buttons. The current settings of the items that can be manipulated via 
the selected menu appear.
2
Select a menu using the 
 /  buttons, then press the   or ENTER button.
The display for the selected menu appears.
[ex. Adjusting SHARPNESS]
Use the 
 /  buttons to select...

ViewSonic  PJ65024
Operating the PC Screen
You can use the remote control as a simplified mouse or keyboard.
CAUTION:
 
Mistaken use of the mouse/keyboard control could damage your equipment.
• Only connect to a PC.
• Before connecting, read the manuals of the device you will connect.
• Do not unplug the connector cables while the computer is operating.
PS/2, ADB, Serial Mouse Control
1
Turn off the projector and PC power, and connect the projector’s CONTROL terminal to the computer via 
the mouse...

25ViewSonic  PJ650
OSD Menu Function Description
This device has 6 separate menus: MAIN, PICTURE 1, PICTURE 2, INPUT, SCREEN and OPTION. Each of 
these menus is operated using the same methods.
The basic operations of these menus are as follows.
Main Menu 
With the MAIN menu, the seven items shown in the Table below can be 
performed.
Perform each operation in accordance with the instructions in the Table.
Menu screen display Press the MENU button.
Menu selection
Choose a menu name using the   /...

ViewSonic  PJ65026
Picture 1 Menu 
With the PICTURE 1 menu, the five items shown in the Table below can be 
performed. 
Perform each operation in accordance with the instructions in the Table.
Picture 2 Menu
With the PICTURE 2 menu, the five items shown in the Table below can be 
performed.
Perform each operation in accordance with the instructions in the Table.
Item Description
COLOR BAL R
Adjust Red Color Balance: 
Dark  Light
COLOR BAL B
Adjust Blue Color Balance: 
Dark  Light
SHARPNESS
Adjust...

27ViewSonic  PJ650
Input Menu
With the INPUT menu, the four items shown in the Table below can be 
performed. With inputting of RGB IN 1 and RGB IN 2 signals, the horizontal 
and vertical frequencies of the signals will be displayed on the initial screen of 
the INPUT menu.
Perform each operation in accordance with the instructions in the Table.
Item Description
AUTO Auto Adjust (for RGB): 
Automatically adjusts H POSITION, V POSITION, H PHASE, and H SIZE. 
Use this function with the maximum window...