ViewSonic Pj568d Projector User Manual
Here you can view all the pages of manual ViewSonic Pj568d Projector User Manual. The ViewSonic manuals for Projector are available online for free. You can easily download all the documents as PDF.
Page 31
24ViewSonic PJ588D/PJ568D/PJ508D ITEMDESCRIPTIONDEFAULT Security Lock Press the cursor button to Enable or Disable Security Lock. When you enable Security Lock a Register Password dialog box appears: You can only use the following cursor buttons, in the password fields. Press the cursor buttons five times in any order and con-firm to set the password. When the password is enabled, it must be entered every time after you power on the projector. See “Setting an Ac-cess Password...
Page 32
25ViewSonic PJ588D/PJ568D/PJ508D User Color Press the Menu button to open the OSD menu. Press to move to the Setup menu. Press to move to the Advanced Feature menu and then press Enter or . Press to move to the User Color menu and then press Enter or . Press to move up and down to select a color. Press to change values for sett ngs. ITEMDESCRIPTIONDEFAULT RedPress the cursor button to adjust the red color level (Range: 0 – 100)80 GreenPress the cursor button to adjust...
Page 33
26ViewSonic PJ588D/PJ568D/PJ508D Config Menu Press the Menu button to open the Main menu. Press the cursor button to move to the Config menu. Press the cursor button to move up and down n the Config menu. Press to change values for sett ngs. ITEMDESCRIPTIONDEFAULT Blank ScreenPress the cursor button to select a background color for the blank screen (Range: Black – Red – Green – Blue – White) Blue Auto SourcePress the cursor button to enable or disable automatic source...
Page 34
27ViewSonic PJ588D/PJ568D/PJ508D Utility Menu Press the Menu button to open the Main menu. Press the cursor button to move to the Utility menu. Press the cursor button to move up and down n the Utility menu. Press to change values for sett ngs. ITEMDESCRIPTIONDEFAULT Video TypePress the cursor button to select the video standard (Range: Auto – NTSC – PAL – SECAM)Auto Projection Press the cursor button to choose from four projection methods: Desktop front Desktop mount,...
Page 35
28ViewSonic PJ588D/PJ568D/PJ508D Digital Zoom Digital operation for zoom and pan adjustment. Press Enter or . The Zoom menu appears. Press to zoom in; press to zoom out. Press Enter or to open the Pan menu. (You must zoom in before you can open the Pan menu.) Use the cursor buttons to pan the zoomed image. Press the Menu button to exit. — ResetReset Video Type, Video, Projection, and Digital Zoom to default values— Utility Menu Functions Available for Connected Source FunctionRGBComponent...
Page 36
29ViewSonic PJ588D/PJ568D/PJ508D Language Menu Press the Menu button to open the OSD menu. Press the cursor button to move to the Language menu. Press the cursor button to move up and down n the Language menu. Select the value, and then press Enter to confirm the new sett ng. ITEMDESCRIPTIONDEFAULT Language Press the cursor to select the desired language. Language options: English, French, Spanish, German, Portuguese, Chinese-Simplified, Chinese-Traditional, Russian,...
Page 37
30ViewSonic PJ588D/PJ568D/PJ508D Status Menu Press the Menu button to open the Main menu. Press the cursor button to move to the Status menu. Press the cursor button to move up and down n the Status menu. ITEMDESCRIPTIONDEFAULT Video InformationDisplay the resolution and refresh rate for RGB/DVI mode. Display the color standard for video mode. These items are display only. Active SourceDisplay the active source Software VersionDisplay information about the software version Lamp HoursShow...
Page 38
31ViewSonic PJ588D/PJ568D/PJ508D MAINTENANCE AND SECURITY Replacing the Projection Lamp The project on lamp should be replaced when t burns out. It should only be replaced w th a certified replacement part, wh ch you can order from your local dealer. Important: The lamp contains a certain amount of mercury and should be disposed of according to local ordinance regulations. Avoid touching the glass surface of the new lamp: Doing so may shorten its operation life. Warning: Be...
Page 39
![Page 39
32ViewSonic PJ588D/PJ568D/PJ508D
3.Remove the two screws from the lamp module [A] and then lift the module handle up [B].
4.Pull up firmly to remove the lamp module.
5.Reverse Steps 1 to 4 to install the new lamp module. Note: The lamp module should be oriented as shown here when replacing.
Resetting the Lamp
After replac ng the lamp, reset the lamp hour counter to zero. Refer to the follow ng:
1.Press the Menu button to open the Main menu.
2.Press the cursor button to move to the...](http://img.usermanuals.tech/thumb/80/97410/w300_viewsonic-pj568d-manual_d-38.png "Page 39
32ViewSonic PJ588D/PJ568D/PJ508D
3.Remove the two screws from the lamp module [A] and then lift the module handle up [B].
4.Pull up firmly to remove the lamp module.
5.Reverse Steps 1 to 4 to install the new lamp module. Note: The lamp module should be oriented as shown here when replacing.
Resetting the Lamp
After replac ng the lamp, reset the lamp hour counter to zero. Refer to the follow ng:
1.Press the Menu button to open the Main menu.
2.Press the cursor button to move to the...")
32ViewSonic PJ588D/PJ568D/PJ508D 3.Remove the two screws from the lamp module [A] and then lift the module handle up [B]. 4.Pull up firmly to remove the lamp module. 5.Reverse Steps 1 to 4 to install the new lamp module. Note: The lamp module should be oriented as shown here when replacing. Resetting the Lamp After replac ng the lamp, reset the lamp hour counter to zero. Refer to the follow ng: 1.Press the Menu button to open the Main menu. 2.Press the cursor button to move to the...
Page 40
33ViewSonic PJ588D/PJ568D/PJ508D 5.Press the cursor buttons in this or-der: . The “Lamp Hour Reset OK !!” mes-sage appears. Then the Status menu appears again showing the Lamp Hours reset to zero.