ViewSonic Pj556d Projector User Manual
Here you can view all the pages of manual ViewSonic Pj556d Projector User Manual. The ViewSonic manuals for Projector are available online for free. You can easily download all the documents as PDF.
Page 31
26ViewSonic PJ506D Replacing the Lamp Projector lamps have a finite life. Replace the lamp when: The mage becomes darker and hues become weaker after a lamp has been for a long per od of t me. The projector lamp LED nd cator turns nto amber. Refer to sect on t tled “LED Indicator Messages” for further deta ls. The lamp becomes high temperature after turning off the projector with the...
Page 32
ViewSonic PJ506D27 1. Turn off the projector and unplug the AC power cord. 2. Place a protect ve sheet (cloth) beneath the projector. Turn the projector over so you can access the lamp cover. 3. Loosen the access panel screws and open the panel. 4. Loosen the screws on the bottom of the lamp assembly. 5. Grasp the lamp handle and pull the lamp assembly d rectly out of...
Page 33
28ViewSonic PJ506D Specifications Display Type Single 0.55” DLP panel Resolution (Pixels) 800 x 600 Lens Manual Zoom (1.1X) Aspect Ratio Auto, 16:9, 4:3 Screen Size 25” - 285” (Diagonal) Lamp 200W Projection Type Front, Rear, Ceiling Video Compatibility NTSC4.43 PAL-60, PAL-M,N,(B,D,G,H,I ) SECAM Input Source D-Sub 15 pin, S-Video, Composite Video, Stereo Phone Jack, RS232, USB Scanning Frequency Horizontal Frequency 31 -...
Page 34
ViewSonic PJ506D29 Appendix LED Indicator Messages Projector Status Standby Lamp gn t on fa lure Power on Lamp l fe warn ng Power off Over temperature LED Type Power LEDLamp LED ColorStatusColorStatus Meaning Green Amber Amber - - - Flash ng Sol d Sol d - - - - - Green Amber Green Amber - - Sol d Sol d Flash ng Flash ng The projector s powered and ready. The projector system has some problems w...
Page 35
30ViewSonic PJ506D Compatibility Modes Computer: Mode Resolution fH (kHz) fV (Hz) Timing 480P 640 x 480 31.46 59.9 60Hz VGA 640 x 480 37.86 72.8 60Hz VGA 640 x 480 37.5 75.0 75Hz VGA 640 x 480 43.2 85.0 85Hz VGA 720 x 400 31.5 70.0 60Hz VGA 720 x 400 37.9 85.0 85Hz SVGA 800 x 600 35.1 56.2 56Hz SVGA 800 x 600 37.8 60.3 60Hz SVGA 800 x 600 48.0 72.1 72Hz SVGA 800 x 600 46.8 75.0 75Hz XGA 1024 x 768...
Page 36
ViewSonic PJ506D31 Troubleshooting Refer to the symptoms and measures l sted below before send ng the projector for repa rs. If the problem pers sts, contact your local reseller or serv ce center. Please refer to “LED Ind cator Messages” as well. Symptom No power. Power goes out during use. No image appears on screen. Partial, scrolling or incorrectly displayed image.Image is unstable or...
Page 37
32ViewSonic PJ506D Symptom Remote control doesn’t work. CauseThe battery could be weak. The remote control s not be ng used w th n the effect ve range.There are some obstruct ons between the remote control and projector. There are some fluorescent or other br ght l ghts sh n ng at the projector’s nfrared remote sensor. SolutionReplace w th a new battery. Use the remote...
Page 38
ViewSonic PJ506D33 Customer Support For techn cal support or product serv ce, see the table below or contact your reseller. Note : You w ll need the product ser al number. Country/RegionWeb SiteT=Telephone F=FaxE-mail Un ted States www.v ewson c.com/support/T= 800 688 6688 F= 909 468 1202serv ce.us@v ewson c.com Canadawww.v ewson c.com/supportT= 866 463 4775serv ce.ca@v ...
Page 39
34ViewSonic PJ506D Limited Warranty VIEWSONIC® PROJECTOR What the warranty covers: V ewSon c warrants ts products to be free from defects n mater al and workmansh p, under normal use, dur ng the warranty per od. If a product proves to be defect ve n mater al or workmansh p dur ng the warranty per od, V ewSon c w ll, at ts...
Page 40
ViewSonic PJ506D35 2. To obta n warranted serv ce, you w ll be requ red to prov de (a) the or g nal dated sales sl p, (b) your name, (c) your address, (d) a descr pt on of the problem, and (e) the ser al number of the product. 3. Take or sh p the product fre ght prepa d n the or g nal conta ner to an...