ViewSonic Pj551d Projector User Manual
Have a look at the manual ViewSonic Pj551d Projector User Manual online for free. It’s possible to download the document as PDF or print. UserManuals.tech offer 617 ViewSonic manuals and user’s guides for free. Share the user manual or guide on Facebook, Twitter or Google+.
ViewSonic ® PJ551D DLP Projector IMPORTANT: Please read this User Guide to obtain important information on installing and using your product in a safe manner, as well as registering your product for future service. Warranty information contained in this User Guide will describe your limited coverage from ViewSonic Corporation, which is also found on our web site at http://www.viewsonic.com in English, or in specific languages using the Regional selection box in the upper right corner of our websit\ e. “Antes de operar su equipo lea cuidadosamente las instrucciones en es\ te manual” - User Guide - Guide de l’utilisateur - Bedienungsanleitung - Guía del usuario - Guida dell’utente - Guia do usuário - Användarhandbok - Käyttöopas - Руководство пользователя - 使用手冊 (繁體) - 使用手冊 (簡體) - 사용자 안내서 Model No. : VS11973
PJ551DViewSonici Compliance Information FCC Statement This device complies with part 15 of FCC Rules. Operation is subject to \ the following two conditions: (1) this device may not cause harmful interference, and (\ 2) this device must accept any interference received, including interference that may cause undesir\ ed operation. This equipment has been tested and found to comply with the limits for a\ Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses, and can radiate radio frequency energy, and if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipm\ ent does cause harmful interference to radio or television reception, which can be determined b\ y turning the equipment off and on, the user is encouraged to try to correct the interference by o\ ne or more of the following measures: • Reorient or relocate the receiving antenna. • Increase the separation between the equipment and receiver. • Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. • Consult the dealer or an experienced radio/TV technician for help. Warning: You are cautioned that changes or modifications not expressly approved by the party responsible for compliance could void your authority to operate the equi\ pment. For Canada • This Class B digital apparatus complies with Canadian ICES-003. • Cet appareil numérique de la classe B est conforme à la norme NMB-003 du Canada. CE Conformity for European Countries The device complies with the requirements of the EEC directive 89/336/EE\ C as amended by 92/31/EEC and 93/68/EEC Art.5 with regard to “Electromagnetic compatibility”, and 73/23/EEC as amended by 93/68/EEC Art.13 with regard to “Safety.” Following information is only for EU-member states: The mark shown to the right is in compliance with the Waste Electrical and Electronic Equipment Directive 2002/96/EC (WEEE). The mark indicates the requirement NOT to dispose the equipment as unsorted municipal waste, but use the return and collection systems according to local law.
PJ551DViewSonicii Important Safety Instructions 1. Read these instructions. 2. Keep these instructions. 3. Heed all warnings. 4. Follow all instructions. 5. Do not use this unit near water. 6. Clean with a soft, dry cloth. If still not clean, see “Cleaning the D\ isplay” in this guide for further instructions. 7. Do not block any ventilation openings. Install the unit in accordance wi\ th the manufacturer’s instructions. 8. Do not install near any heat sources such as radiators, heat registers, stoves, or other devices (including amplifiers) that produce heat. 9. Do not defeat the safety purpose of the polarized or grounding-type plug. A polarized plug has two blades with one wider than the other. A grounding type plug has two blades and a third grounding prong. The wide blade and the third prong are provided for your safety. If the provided plug does not fit into your outlet, consult an electrician for replacement of the obsolete outlet. 10. Protect the power cord from being walked on or pinched particularly at plugs. Convenience receptacles and the point where they exit from the unit. Be sure that th\ e power outlet is located near the unit so that it is easily accessible. 11. Only use attachments/accessories specified by the manufacturer. 12. Use only with the cart, stand, tripod, bracket, or table specified by the manufacturer, or sold with the unit. When a cart is used, use caution when moving the cart/unit combination to avoid injury from tipping over. 13. Unplug this unit when unused for long periods of time. 14. Refer all servicing to qualified service personnel. Servicing is req uired when the unit has been damaged in any way, such as: if the power-supply cord or plug is damaged, if liquid is spilled onto or objects fall into the unit, if the unit is exposed to ra\ in or moisture, or if the unit does not operate normally or has been dropped.
PJ551DViewSoniciii Declaration of RoHS Compliance This product has been designed and manufactured in compliance with Direc\ tive 2002/95/EC of the European Parliament and the Council on restriction of the use of cer\ tain hazardous substances in electrical and electronic equipment (RoHS Directive) and is deemed \ to comply with the maximum concentration values issued by the European Technical Adaptation Committee (TAC) as shown below: SubstanceProposed Maximum ConcentrationActual Concentration Lead (Pb)0.1%< 0.1% Mercury (Hg)0.1%< 0.1% Cadmium (Cd)0.01%< 0.01% Hexavalent Chromium (Cr6+)0.1%< 0.1% Polybrominated biphenyls (PBB)0.1%< 0.1% Polybrominated diphenyl ethers (PBDE)0.1%< 0.1% Certain components of products as stated above are exempted under the Annex of the RoHS Directives as noted below: Examples of exempted components are: 1. Mercury in compact fluorescent lamps not exceeding 5 mg per lamp and in other lamps not specifically mentioned in the Annex of RoHS Directive. 2. Lead in glass of cathode ray tubes, electronic components, fluorescent tubes, and electronic ceramic parts (e.g. piezoelectronic devices). 3. Lead in high temperature type solders (i.e. lead-based alloys containin\ g 85% by weight or more lead). 4. Lead as an allotting element in steel containing up to 0.35% lead by wei\ ght, aluminium containing up to 0.4% lead by weight and as a cooper alloy containing up\ to 4% lead by weight.
PJ551DViewSoniciv Copyright Information Copyright© ViewSonic© Corporation, 2007. All rights reserved. Macintosh and Power Macintosh are registered trademarks of Apple Computer, Inc. Microsoft, Windows, Windows NT, and the Windows logo are registered trademarks of Microsoft Corporation in the United States and other countries. ViewSonic, the three birds logo, OnView, ViewMatch, and ViewMeter are registered trademarks of ViewSonic Corporation. VESA is a registered trademark of the Video Electronics Standards Association. DPMS and DDC are trademarks of VESA. PS/2, VGA and XGA are registered trademarks of International Business Machines Corporation. Disclaimer: ViewSonic Corporation shall not be liable for technical or editorial erro\ rs or omissions contained herein; nor for incidental or consequential damages resulting from furnishing this material, or the performance or use of this product. In the interest of continuing product improvement, ViewSonic Corporation reserves the right to change product specifications without notice. Information in this document may change without notice. No part of this document may be copied, reproduced, or transmitted by an\ y means, for any purpose without prior written permission from ViewSonic Corporation. Product Registration To meet your future needs, and to receive any additional product informat\ ion as it becomes available, please register your product on the Internet at: www.viewsonic.com. The ViewSonic® Wizard CD-ROM also provides an opportunity for you to print the registrat\ ion form, which you may mail or fax to ViewSonic. For Your Records Product Name: Model Number: Document Number: Serial Number: Purchase Date: PJ551D ViewSonic DLP Projector VS11973 PJ551D_UG_ENG Rev. 1A 08-27-07 _____________________________________ _____________________________________ The lamp in this product contains mercury. Please dispose of in accordance with local, state or federal laws.
ViewSonic PJ551D Contents Introduction ...................................................................... 1 Projector Features................................................................................................... 1 Package Contents ................................................................................................... 2 Projector Overview .................................................................................................. 3 Using the Product ............................................................ 5 Control Panel .......................................................................................................... 5 Connection Ports..................................................................................................... 6 Remote Control ....................................................................................................... 7 Replacing the Battery .............................................................................................. 8 Remote Control Operation ...................................................................................... 9 Installation ...................................................................... 10 Connecting the Projector....................................................................................... 10 Powering On/Off the Projector .............................................................................. 11 Adjusting the Projector .......................................................................................... 12 Menu Operation .............................................................. 14 Maintenance ................................................................... 18 Cleaning the Lens ................................................................................................. 18 Cleaning the Projector Housing ............................................................................ 18 Replacing the Lamp .............................................................................................. 19 Specifications ................................................................. 21 Appendix ......................................................................... 22 LED Indicator Messages ....................................................................................... 22 Compatibility Modes .............................................................................................. 23 Troubleshooting .................................................................................................... 24
ViewSonic 1 PJ551D Introduction Projector Features „The projector integrates high-performance optical engine projection and a user - friendly design to deliver high reliability and ease of use. „The projector offers the following features:„Single chip 0.55 Texas Instruments DLP® technology„XGA (1024 x 768 pixels)„Auto image re-sizing (Auto-Sync.) to 1024 x 768 full screen with scaling compression compatibility for VGA, SVGA, XGA and SXGA* „Compatibility with Macintosh® computers„Compatibility with NTSC, PAL, SECAM and HDTV„D-Sub 15-pin terminal for analog video connectivity„User-friendly, multi-language on-screen display„Advanced electronic keystone correction * means compressed. Ground Notes on the AC Power Cord AC Power Cord must meet the requirement of countries where you use this projector. Please confirm your AC plug type with the graphics below and ensure that the proper AC Power Cord is used. If the supplied AC Power Cord does not match your AC outlet, please contact your sales dealer. This projector is equipped with a grounding type AC line plug. Please ensure that your outlet fits the plug. Do not defeat the safety purpose of this grounding type plug. We highly recommend using a video source device also equipped with a grounding type AC line plug to prevent signal interference due to voltage fluctuations.
ViewSonic 2 PJ551D Package Contents When you unpack the projector, make sure you have all these components: Projector with Lens Cap AC Power Cord VGA Cable (D-SUB to D-SUB) Remote Control (IR) User’s Manual Quick Start Guide „Save the original shipping carton and packing material; they will comein handy if you ever to ship your unit. For maximum protection, repack your unit as it was originally packed at the factory. „Accessories and components may vary by retailer and region.
ViewSonic 3 PJ551D Projector Overview Front View Lens cap AC power socket Elevator button Control panel Lens cap strap Zoom ring Projection lens Focus ring Front IR remote control sensor Lamp cover Ventilation holes 124563 7 910811 17 28 39 410 511 6
ViewSonic 4 PJ551D Rear View Connection ports Kensington lock Rear IR remote control sensor Ventilation holes Bottom View Elevator foot Ceiling mount Tilt-adjustment foot 1324 1234 1 2 3 123 „This projector can be used with a ceiling mount for support. The ceiling mount is not included in the package.