ViewSonic Pj458d Projector User Manual

10
ViewSonic PJ458D

Control Panel
LED
1.   POWER (Power LED indicator)
2.   LAMP (Lamp LED indicator)
Button 
1.   
2.   MENU\ENTER 
3.  KEYSTONE  (
/)
4.   AUTO (
)
5.   Four direction buttons
6.   SOURCE (
 )
Interface Connector
1.  Service connector
  This connector is used for engineering purpose.
2.  AUDIO input connector
  Connect an audio output from video equipment to this jack.
3.  COMPUTER IN (D-SUB) connector
  Connect image input signal (analog) to this connector.
4.  S-VIDEO connector...

11
ViewSonic PJ458D

Remote Control Components
1.    Power button
2.   Four direction buttons
3.   Menu button
4.   Enter button
5.   Keystone 
/ buttons
6.   Volume 
/ buttons
7.  Source button
8.  Mute button
9.  Blank button
10. 4:3/16:9 button
11. Auto button
POWER  
MUTE
4:3/16:9     KEYST
ONE
LASER
ENTER                               BLANK
MENU
VOLUME
AUTOSOURCE1
2
3
4
7
65
8
9
10
11 

12
ViewSonic PJ458D

Installation
Connecting the Projector
A. Connecting to a computer
1   AC Power Cord
2   VGA Cable (D-SUB to D-SUB)
Desktop typeLaptop type
1
2 

13
ViewSonic PJ458D

B. Connecting to a Video Source
1.Connecting with S-Video Cable
1  AC Power Cord
2   S-Video Cable
3   Audio Cable
1
2
3 

14
ViewSonic PJ458D

2.Connecting with Composite Video Cable
1   AC Power Cord
2   Composite Video Cable
3  Audio Cable
1
2
3 

15
ViewSonic PJ458D

3.Connecting with HDTV Cable
1   AC Power Cord
2   D-SUB to HDTV Cable
3  Audio Cable
 When  connecting  cable,  power  cords  of  both  a  projector  and  external 
equipment should be disconnected from AC outlet.
1
2
3 

16
ViewSonic PJ458D

Powering On/Off  the Projector
Powering On the Projector:
1.  Remove the projector lens cap.
2.  Complete the AC power cord and peripheral signal cable(s) connections. 
3.  Press  the 
  button  on  the  Projector  Control  Panel  or  the   Power  button  on 
the Remote Control to turn on the power.
4.  Tu r n  o n  y o u r  s o u r c e  ( c o m p u t e r,  n o t e b o o k ,  D V D ,  e t c . ) .  T h e  p r o j e c t o r 
automatically detects your source. 
   If the “Searching for...

17
ViewSonic PJ458D

Adjusting the Projected Image
Adjusting the Projector Height
To raise the projector:
1.   Lift up the rear side of the projector, and press the foot adjuster buttons on the 
two sides.
2.  Raise  the  projector  to  the  desired  display  height,  and  then  release  the  buttons 
to lock the foot adjusters into position.
To lower the projector:
1.  Lift up the rear side of the projector, and press the foot adjuster buttons on the 
two sides. 
2.  Lower the projector, and then...

18
ViewSonic PJ458D

Adjusting the Projector Zoom and Focus 
1.  Adjust the image size by rotating the zoom ring.
  Rotate to the right to reduce the image.
  Rotate to the left to enlarge the image.
2.  Focus the image by rotating the focus ring.
  A still image is recommended for focusing.
Adjusting Projection Image Size
Refer  to  the  graphic  and  table  below  to  determine  the  screen  size  and  projection 
distance.
Zoom Ring
Focus Ring
Distance between the screen 
and the center of the lens 

19
ViewSonic PJ458D

  Projection    4 : 3 Screen Size –Diagonal  16 : 9 Screen Size-Diagonal 
  Distance                   (inch)                     (inch)
 
  (m)    Wide  Tele    Wide  Tele 
  1.2    33.0  27.5    30.2  25.2 
  1.5    41.2  34.3    37.8  31.5 
  2    55.0  45.8    50.4  42.0 
  2.2    60.5  50.4    55.5  46.2 
  3    82.5  68.7    75.7  63.1 
  4    110.0  91.6    100.9  84.1 
  5    137.5  114.5    126.2  105.1 
  6    165.0  137.5    151.4  126.2 
  7    192.5  160.4    176.6...