ViewSonic Nx2240w-e Manual

							
  
Remote Control 
 
PGM+/-  
Press + or - buttons to scroll 
through the channels (or 
MENU ▲ /▼ button). 
 
VOL+/-  
Press + or – to increase or 
decrease the volume (or 
MENU 
 button). 
 
MENU  
Press this key to display or
exit main menu. 
 
MUTE 
Temporarily interrupt the 
sound or restore it.   
 
NICAM 
To select Mono/ 
Stereo/Dual from TV RF 
input. 
 
POP, SWAP, Position,GUIDE
is not available on this model.
 
 
ViewSonic                              9                        NX1940w/NX2240w 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
                     
POWER:                     
Press to turn on/off the TV.   
The TV is never completely 
powered off unless it is 
physically unplugged. 
 
SOURCE  
Press to select input signal 
source. 
 
0~9 DIGIT buttons and -/100 
Press to enter channel 
numbers. 
 
RECALL 
To display the previously 
selected TV channel. 
 
TV/DTV  
DTV is not available this mode. 
Press to select TV mode. 
 
SCART 
Press to select SCART mode. 
 
HDMI/PC 
Press to toggle between PC and
HDMI source modes. 
 
AV / C O M P  
Press to toggle between AV, 
S-VIDEO and YPbPr source 
modes. 
 
DISPLAY 
Press this key to display: 
(1) the channel number when 
watching a TV programme. 
(2) the input source when 
watching the other video 
programme. 
WIDE 
Press to change size mode,
Size is not available on PC and 
HDMI mode.   
  ENGLISH 
						

							
Teletext  
Teletext is an information service organized li ke a magazine, which is provided by some 
TV stations in addition to regular television broadcasting.  
 TELETEXT /GUIDE 
Press TELETEXT. The Teletext screen appears. 
To turn off the Teletext mode, press  TELETEXT again. 
 
ENTER 
When TELETEXT mode is open, Press ENTER to 
superimpose the teletext over a normal broadcast picture. 
Press a
gain to return to Teletext mode.
INDEX 
Press  INDEX to return to the main index page. 
SUBPAGE this is subpage function. 
REVEAL  
Press REVEAL  to display hidden words e.g. quiz page 
answers. Press again to hide.
 
RED / GREEN / YELLOW / BLUE 
Use the COLOURED BUTTONS  to operate the Teletext 
screen.
 
PAGE SELECTION  
Page can be selected in two ways. 
a. Press ▼or ▲  to increase or decrease the page number.   
b. Input the page number by digit buttons 0~9. 
ViewSonic                            10                          NX1940w/NX2240w 
ENGLISH 
						

							
Wall Mount Bracket   
 
(19”) 
 
 
 (22”) 
 
1.  Remove the four units M4.0 screws.   
2.  Remove the Base Ass’y. 
3.	 Fasten four units M4.0 X 10mm screws to secure the wall mount brack\
et. 
Note: If you want to wall mount the TV, for the safety of you and the ap\
pliance, please 
use the correct hanging brackets. (Wall mounting brackets are not inclu\
ded when you 
purchase the TV) 
 
 
  ViewSonic                             11                        NX1940w/NX2240w 
ENGLISH 
						

							
Control Knobs 
 
 
 
 
 
 
Vol(▲ ):When the OSD menu appears, press these two buttons to confirm the selected 
item; when no OSD menu appears, use to adjust the volume. 
CH( ▲ ): When the OSD menu appears, press these two buttons to select the 
item you want to execute; when no OSD  menu appears, use to change channels in TV 
mode. 
Menu   :  Press this button to display or exit the OSD menu. 
Input   :  Press this button to change input source.  
Power  : Press this button to turn on the TV or allow the TV to enter standby mod\
e. 
If the TV is in standby mode, the indicator at the front will illuminate\
s amber. 
 
There is a wide range of video and audio equipment that can be connected to your TV. 
The following connection diagrams show you how to connect them.
 
 
ViewSonic                            12                          NX1940w/NX2240w 
Power lock or unlock
Press 
INPUT  button more than 5 seconds can lock or unlock the function of POWER but\
ton.



OSD lock or unlock
Press MENU button more than 5 seconds can lock or unlock the function of MENU butt\
on.

 
						

							
Preparation 
 
Lay the LCD TV with the screen down on a table, as it will be easier to connect your 
peripheral equipment. Please take your precautions not to damage the screen. 
 
  
（19”） 
 
 
 
(22”) 
                            
 
1: AV1 signal input 
2: Right audio track input 
3: Headphone outlet   
4: TV signal input 
5: SCART signal input   
6: Left audio track input 
7: S-Video signal input   
8: VGA input or YPbPr signal input 
9: HDMI input 
10: VGA audio input or YPbPr audio input   
11: AC power input terminal 
 
ViewSonic                             13                         NX1940w/NX2240w 
ENGLISHENGLISH 
						

							
1> PC input: 
Note: For the connection between the PC and the TV, (see Figure 1) below. 
 
 
 
(Figure 1) 
(1)How to connect to the PC mainframe:
VGA interface – Connect the VGA signal cable supplied with the TV to the D-sub 
interface at the rear of the TV as in. (Figure 1)
 
(2)How to connect the audio cable: 
Connect the PC audio  cable supplied with the TV to the  TV’s  PC Audio  Input as in. 
(Figure 1)
 
Note: If no signal is present on the VGA screen, the TV will enter into standby mode 
automatically after 3 seconds. 
 
2> HDMI input:   
HDMI is the leading new standard for Digital video and audio interconnection. To the 
HDMI connector you can connect HDMI devices such as a Set Top Box or compatible 
DVD-R or DVD player with HDMI export, or  DVI-equipped devices like a computer. So 
you can display high-definition pictures on this TV in the digital form. 
(1) How to use HDMI: 
 
1. Connect one HDMI to the “HDMI” port and connect the other 
HDMI to device with HDMI export as left figure.
Select the T-Line button, change source button can come into 
HDMI source.
3. The HDMI connectors allow the following TV and monitor 
display mod
: 
SDTV  720x576i, 50Hz /720x480i, 60Hz 
EDTV  720x576p 50Hz /640x480p 60Hz   
HDTV 1920x1080i  50/60Hz 
     1280x720p 50/60Hz 
VGA 720x480 60Hz
 
Notes: 
1. Your TV supports HDCP (High-bandwidth Digi tal Content Protection).This is a system 
for protecting DVD content outputted via DVI from being copied. It provi\
des a secure 
digital link between a video source (DVD, PC, etc.) and your TV. Content is encrypted 
at the source device to prevent unauthorized copies from being made. 
2. Digital devices from different manufacturers have the possibility of different output 
ViewSonic                              14                        NX1940w/NX2240w  
						

							
standards which may cause difficulties for the television to properly display.   
3. In case no signal is detected from your HDMI device, turn off the HDMI device and 
then on again.   
4. To get an optimal viewing, it is advised to turn your DVD player to one of the following  TV display standards: 1280x720p 50Hz. 
 
3> S-Video Input: Connect the S-Video cable to DVD player, Laser Disc player, video  cassette recorder or camcorder.   
 
4> YPbPr input: 
 
 
How to connect a DVD Player or Home Cinema System using Compont Video 
Connections:
Connect the Video cable between the D-Sub interface on the unit and Y, Pb, Pr output 
jacks on the DVD player. 
Connect the Audio cable between the Audio input socket on the unit and Audio output 
jacks on the DVD player. 
 
Notes: 
The  Y,  P b ,  P r  output on your DVD  palyer are sometime labeled Y, Cb, Cr or  Y,  B - Y,  R - Y. If 
so, connect cables to like colors. 
 
5> Audio Input: Connect the audio signal source. (PC, DVD player, Laser Disc player,  video cassette recorder or camcorder) to the Audio Input ports.
 
6> Video Input: Connect the video signal source. (PC, DVD player, Laser Disc player, videocassette recorder or camcorder) (The audio is for S-Video and AV)
 
 
 
 
ViewSonic                               15                       NX1940w/NX2240w 
ENGLISH 
						

							
OSD Function 
 
To use the menus 
 
1. Press the MENU button to display or close main menu. 
2.  Use the cursor up/down to select a menu item.   
3.  Use the cursor left/right to enter a submenu or enable/disable the function. 
4. Press the MENU button to exit the menu. 
 
Main Menu   
 
Press the MENU button to enter the main OSD (On Screen Display). Adjust the items 
including Picture Setup, Sound setup, Function Setup and TV setup. When the input 
source is  AV/S-VIDEO /SCART/YPbPr/ PC/ HDMI  mode, only the Sound Setup, Picture 
Setup and Function Setup can be selected; shown in the figure below:   
 
 
 
 
When the input source is TV mode, the Sound Setup, Picture Setup, Channel select 
Setup, Function Setup and TV Setup can be selected; shown in the figure below: 
 
  
Sound Setup  (Same as in TV/AV/S-VIDEO /SCART/YPbPr/ PC/ HDMI ) 
1.  The range of adjusting volume, bass and treble is from 0~100.   
2.  Bass and Treble: the easy Equalizer function, Bass can adjust the low frequency 
sound and Treble can adjust the high frequency sound. 
ViewSonic                             16                         NX1940w/NX2240w 
ENGLISH 
						

							
3.  The range of adjusting Balance is -50~+50; when adjusting from 0 to -50,\
 the sound from the left track fades until silence; when adjusting from 0 to +50, the sound fro\
m 
the right track fades until silence.   
4.  AVL: you can set it “ON” or “OFF”. 
The function is to adjust the input sound automatically. You may enable this function 
when you notice that the sound in the two tracks are very different, in order to prevent 
the bad sound effect resulting from large sound variation. 
5.  Select ON or OFF for Loudness: a default setting is preset, you may \
adjust when necessary.  
The following menu will appear when selecting continuously:   
 
 
 
6.  Preset: Designed for different types of sound output, where in, the voice music, personal and theatre modes are preset; you can set Bass, Treble and Equalizer in 
sound output mode according to your preference. 
7.  Equalizer: You can select and adjust 100, 300, 1K, 3K and 8K respectively (the figures 
represent the sound frequency range).   
 
 
 
8.  Reset to default: Reset the sound setting to the factory default value. \
    
Picture setup 
When the input source is in  TV/AV/S-VIDEO /SCART/ YPbPr/ HDMI , you can select 
Brightness, Contrast, Colour, Sharpness, Dyn. Colour Temp, preset and Reset to default 
respectively; shown in the figure below: 
 
ViewSonic                           17                           NX1940w/NX2240w 
ENGLISH 
						

							
  
When the input source is in PC mode, you can select Brightness, Contrast\
, Position, 
Video noise, Sharpness, Auto Adjust, Info, Colour Temp., Red, Green, Blue and Reset to 
default. 
1.  Brightness and Contrast: The range can be adjusted from 0~100.   
2.  Position: There are two options, Horizontal and Vertical, which can be adjusted from -50 to +50.   
3.  Video noise: There are two options, Phase and Clock, which can be adjusted from -50 \
to +50.   
4.  Sharpness: Select from five options of Softest, Soft, Auto, Sharp and Sharpest. You may adjust the above options according to your preference. 
5.  Auto Adjust: Automatically adjust PC input to the optimal screen size. 
6.  Information: Prompt the current size for PC input definition (only the definition that can be shown by this device).   
7.  Colour Temp.: There are four options of colour temperature provided for users - normal, warm, cold and User. You can select the three colour temperatures of normal, 
warm, and cold, or manually adjust red, green or blue in the User setting (you can only 
adjust red, green and blue in the user setting).   
8.  Reset to default:    It is used to reset the picture settings to the factory default mode.   
 
Function Setup 
When the input source is in TV mode, you can select Source OSD, Language, Country, 
ACI, Timers, TT Language, Teletext E/W and Reset to default; shown in the figure below:   
  
1.  Current Source OSD setting: When OSD is set to ON, the left upper corner of the display will show the input source or the TV channel number; when OSD is set to OFF, 
the input source or the TV channel number will disappear.   
2.  OSD language setting: There are ten languages option provided - English, French, German, Spanish, Russian, Italian, Finnish, Swedish, Danish, Norwegian. 
ViewSonic                              18                        NX1940w/NX2240w 
ENGLISH