ViewSonic N2750w Users Guide

							E
N
G L I
S
H
Advanced Operation
VIDEO—Adjust the Video
Press  MENU .
Press        to select VIDEO.
Press  ENTER .
Press        to select the desired item
you want to adjust.
Use        to adjust it.
Press  EXIT to close the recent page.
Press  MENU  again to leave OSD
Menu.
-OSD Menu/ Remote Control
BY OSD MENU
The video menu is active in all input sources.
ViewSonic     N2750w    20
Contrast:  To adjust the white level of the video.
Brightness:  To adjust the black level of the video.
Colour:  To adjust the colour saturation.
Sharpness:  To adjust the picture sharpness of the video.
Tint:  To adjust the tint level.
 
						

							E
N
G L I
S
H
GRAPHICS—Adjust the Graphics
Press  MENU .
Press        to select Graphics.
Press  ENTER .
Press        to select the desired
item you want to adjust.
Use        to adjust it.
Press  EXIT to close the recent
page.
Press  MENU  again to leave OSD
Menu.
Auto Adjust:  Auto adjust picture’s horizontal position, vertical position, fine tune and
H-Size .
H. Position:  To adjust the horizontal position of the graphic.
V. Position:  To adjust the vertical position of the graphic.
Phase:  To remove any horizontal distortion and clear or sharpen the display
characters.
BY OSD MENU
The graphics menu is only active in “RGB.” However, in “Compone\
nt” mode, phase
function will be available.
When in PIP/PBP/Multi Window screen, graphics menu only works on main sc\
reen. In
sub screen, it is unable.
ViewSonic     N2750w   21
 
						

							E
N
G L I
S
H
AUDIO—Adjust the Audio
Press  MENU .
Press        to select AUDIO.
Press  ENTER .
Press        to select the desired item
you want to adjust.
Use        to adjust it.
Press  EXIT to close the recent page.
Press  MENU  again to leave OSD
Menu.
Treble:  To adjust the treble.
Bass:  To adjust the bass.
Balance:  To adjust the left and right audio balance.
BY OSD MENU
The audio menu is active in all input sources.
BY REMOTE CONTROL
SOUND: Press it repeatedly to select the type
of sound of full screen or main screen.
It is only active while the input source is TV.
Mode Exchangeable type of sound
dual dual 1, dual 2
stereo stereo, mono
mono mono
ViewSonic     N2750w    22
 
						

							E
N
G L I
S
H
MUTE:  To mute the sound.
To disable Mute, press  MUTE again, or press        directly to adjust the
sound.
DISPLAY—Adjust the Display
Press  MENU .
Press        to select
DISPLAY.
Press  ENTER .
Press        to select the
desired item you want to
adjust.
Use        to adjust it.
Press  EXIT to close the
recent page.
Press  MENU  again to leave
OSD Menu.
BY OSD MENU
The display menu is active in all input sources.
BY REMOTE CONTROL WIDE: To select the screen width to 16:9, 4:3 or Move Expand viewing
mode. (the function is the same as aspect ratio in OSD menu)
ViewSonic     N2750w   23
Aspect Ratio:  To select the screen width to 16:9, 4:3 or Move Expand viewing mode.
However, it only works on full screen. In PIP/PBP/Multi Window condition\
, it is
unable.
Colour Adjust:  To adjust the colour of red, green, blue, and skin tone for the screen.
Colour Temperature:  To select the screen colour temperature between warm,
defualt, and cool.
 
						

							E
N
G L I
S
H
SETTING—To setup the Setting
Press  MENU .
Press        to select
DISPLAY.
Press  ENTER .
Press        to select the
desired item you want to
adjust.
Use        to adjust it.
Press  EXIT to close the
recent page.
Press  MENU  again to leave
OSD Menu.
BY OSD MENU
While the input source is TV, all the functions of setting menu are active. However, in
other input sources, the functions of country, auto scan, fine tune, and\
 channel edit are
unable—only main source, language, and memory recall are active.
ViewSonic     N2750w    24
Main Source:  There are some input sources provided you to select—AV-IN, S-Video,
D-Sub, YPbPr, TV, and SCART.
Language:  To choose the language of OSD window. There are different languages
to place at your disposal—English, Russian, Finnish, French, Dutch, I\
talian, Spanish,
and Swedish.
Country:  To select the TV broadcast system in your area - Australia ( PAL B/G),
Austria (PAL B/G), China (PAL D/K), Denmark ( PAL B/G), Finland (PAL B/G), France
(SECAM L), Germany (PAL B/G), Italy (PAL B/G), Netherlands (PAL B/G), Norway
(PAL B/G), Russia (SECAM D/K), Spain (PAL B/G), Sweden ( PAL B/G), Switzerland
(PAL B/G), United Kingdom (PAL I), All.
Auto Scan:  To auto scan the TV channels (TV or CATV).
1. Function: To look for all the channels viewable in the set area. Kindly suggest you auto scan all the channels before watching your TV for the first time.
2. After auto scan all the channels, you need not to do it again when turni\
ng on your TV next time.
3. If you want to stop auto scan, press  EXIT.
Fine Tune:  To fine tune TV reception.
 
						

							E
N
G L I
S
H
Channel Edit:  To program your favorite channels and edit the program name.
ViewSonic     N2750w   25
Definition:
1. Channel: Indicate the original channel number.
2. Program Name: Indicate the name you edit for the appointed channel.
Favorite:
1.  There are 0~99 favorite channels provided to set up. The ordinal numbers of favorite channel decide the channel display sequence while using        with your\
 remote
control.
2.  How to program your favorite channels? 1. Use        to move your cursor bar up and down to the desired channel li\
st which isexpected to be the favorite channel.
2. Press the green (INPUT) button.
3. Input the favorite channel ordinal with the number key of your remote co\
ntrol.
4. After inputting, wait few seconds, the favorite you set will automatical\
ly program the position according to the ordinal from Favorite 0~99.
5. If would have a message windows “Delete channel?”, while pressing \
red (PIP/ Split) button, pressing ENTER button to confirm, press EXIT button to c\
ancel.
6. Auto scan the channels can help you search back all the deleted channels\
.
Program Name:
1.  To edit the name for the channel.
2.  How to do? 1. Use        to move your cursor bar up and down to the channel you requir\
e to edit.
2. Press the yellow (SOUND) button.
3. Press        to edit the program name. The name is limited in three characters.
4. If you want to revise the name, press the yellow (SOUND) button to ren\
ame it.
Memory Recall:  Restore the factory setting of Contrast, Brightness, Colour,
Sharpness, Tint, Colour Temperature, Volume, Treble, Bass, and Balance.
 
						

							E
N
G L I
S
H
PIP—Adjust the PIP
Press  MENU .
Press        to select
DISPLAY.
Press  ENTER .
Press        to select the
desired item you want to
adjust.
Use        to adjust it.
Press  EXIT to close the
recent page.
Press  MENU  again to leave
OSD Menu.
BY OSD MENU
The PIP menu is active in all input sources.
It allows you watch two screens or multi-screens from different sources at the same time.
ViewSonic     N2750w    26
PIP Source:  To select the input source for the sub-screen as below.
Main Screen Input Source of Sub-Screen
D-Sub/ YPbPr AV/ S-Video/ SCART/ TV
AV/ S-video / SCART / TV D-Sub/ YPbPr
PIP Mode:  To select the favorite display condition of your screen-Off, PIP (picture in
picture), PBP (picture by picture), or Multi Window.
PIP Size:  To adjust the size of sub-screen of PIP (Not active in PBP condition).
PIP H. Position:  To adjust the horizontal position of sub-screen of PIP (Not active in
PBP condition).
PIP V. Position:  To adjust the vertical position of sub-screen of PIP (Not active in
PBP condition).
PIP Contrast:  To adjust the contrast of the sub-screen of PIP, PBP, or Multi Window
condition.
PIP Brightness:  To adjust the brightness of the sub-screen of PIP, PBP, or Multi
Window condition.
 
						

							E
N
G L I
S
H
BY REMOTE CONTROL
Press  PIP V.SWAP:  main and sub picture of PIP/PBP/Multi Window will be ex-
changed to each other, both sound and picture (A: main picture; B: sub \
picture).
Press  PIP SOUND:  select to sound from sub picture or main picture.
PIP
PBP
Multi-Window
Zoom Adjust
To adjust the focal distance of zoom and pan.
(This function is only active in Full screen. Adjust Zoom:
1.  Press ZOOM button.
2.  Press        to adjust zoom factor.
3.  Press  ZOOM again to exit.
Adjust PAN:
1.  Press  ENTER to switch to pan.
2.  Press       /       to adjust pan.
3.  Pan is only active on the enlarged picture (When the screen is I:I, the pan has no function).
4.  Press  ZOOM again to exit.
ViewSonic     N2750w   27
 
						

							E
N
G L I
S
H
OPTION—Adjust the Option
Press  MENU .
Press        to select VIDEO.
Press  ENTER .
Press        to select the desired item
you want to adjust.
Use        to adjust it.
Press  EXIT to close the recent page.
Press  MENU  again to leave OSD
Menu.
OSD Transparency:  To adjust the background transparency of OSD Menu.
OSD Timeout:  The OSD will automatically turn off if there is no adjustment made for
a certain time of period. You can set up the OSD timeout to 5 seconds, 15 seconds,
45 seconds, or 60 seconds.
Sleep:  To set up the off timer of TV— 15min, 30min, 45min, 60min, or 90min.
Choose OFF for disable Sleep function.
BY OSD MENU
The OPTION menu is active in all input sources.
BY REMOTE CONTROL
Sleep: To set up the off timer of TV— 15min, 30min, 45min, 60min,
or 90min.
To cancel the function, choose OFF.
ViewSonic     N2750w    28
 
						

							E
N
G L I
S
H
27 TFT Active Matrix
0.1555(H) x 0.4665(V) mm pixel pitch
RGB vertical stripe
Anti-Glare
RGB analog (0.7/1.0 Vp-p, 75 ohms)
Separate Sync,
f
h:30-80 kHz, fv:50-75 Hz
TV system Antenna/NTSC
1 compsite RCA, 1 S- Video, 1YPbPr component, 
1  SCA RT
1 mini-stereo, 2 pair of RCA (L/R) stereo
Up to 1280 x 1024 Non-interlaced
1280 x 1024 @ 60 Hz
1024 x 768 @ 60, 75 Hz
800 x 600 @ 60, 75 Hz
640 x 480 @ 60, 75 Hz
5W x 2
1 pair of RCA (L/R) stereo jack, 1 mini-stereo
100-240 VAC, 50/60 Hz (auto switch)
597.12 mm (H) x 335.88 mm (V)
23.5 (H) x 13.2 (V)
32° F to + 104° F (0° C to + 40° C)
10% to 65% (no condensation)
To 10,000 feet (3,000m)
-4° F to + 140° F (-20° C to + 60° C)
10% to 90% (no condensation)
To 40,000 feet (12,000m)
680 mm (W) x 540 mm (H) x 243 mm (D)
26.8 (W) x 21.3 (H) x 9.6 (D)
1 8.3  kg ( 40.3  lb)
CE, CB, TÜV/GS