ViewSonic Cd4620 Users Guide

ViewSonic CD4620  18 
Connecting a DVD Player  with component out 
Connecting your DVD player to your LCD monitor will enable you to display DVD video. 
Refer to your DVD player owner’s manual for more information. 
 
Connect the LCD Monitor to a DVD Player 
y  To connect the DVD/HD In connector (BNC) on the LCD moni tor, use a separately available BNC connector cable. You 
will need a BNC-to-RCA adapter to connect a DVD player with an RCA pin jack to the BNC connector cable (not 
provided). 
y   The...

ViewSonic CD4620  19 
Connecting to a Stereo Amplifier 
You can connect your stereo amplifier to your LCD monitor. Re fer to your amplifier owners manual for more information. 
 
Connect the LCD Monitor to a Stereo Amplifier 
y  Turn on the LCD monitor and the amplifier  only after all connections have been made. 
y   Use an RCA cable to connect the AUDIO OUT connecto r (RCA) on the LCD monitor and the audio input on the 
amplifier. 
y   Do not reverse the audio left and right jacks. 
y   The AUDIO IN 2...

ViewSonic CD4620  20 
Basic Operation  
 
Power ON and OFF Modes  
 The LCD monitor power indicator will turn green while powered on or red in off mode. The monitor can be powered on or 
off using the following three options: 
 
1. Pressing the Main Power Switch. 
 
NOTE:  
When the Main Power Switch is used to power off the 
LCD monitor, the remote control and the power button will 
not activate the on mode and both green and red power 
indicator turn off. Be sure to turn the Main Power Switch to 
the...

ViewSonic CD4620  21 
Power Indicator  
 
 Status 
Power ON  Green Power OFF  Red Power Standby when 
“SCHEDULE” is enable  Red On 
Green Blinking 
Power Standby  Red, Green Diagnosis 
(Detecting failure) 
Red Blinking 
* See troubleshooting 
 
Using Power Management
  The LCD monitor follows the VESA ap proved DPM Power Management function. 
The power management function is an energy saving function t hat automatically reduces the power consumption of the 
display when the keyboard or the mouse has not...

ViewSonic CD4620  22 
Picture Mode 
RGB 1, 2, 3  HIGHBRIGTH  STANDARD  sRGB 
 
DVD/HD, VIDEO    HIGHBRIGTH  STANDARD  CINEMA   
 
Audio Source Switching   You can switch the audio source using the AUDIO INPUT button. 
 
RGB 1, 2  HDMI  AUDIO1  AUDIO2  AUDIO3 
 
Other than RGB 1, 2    AUDIO1  AUDIO2  AUDIO3   
Control Lock Mode 
This function disables the operation bu ttons so that the adjustments you make  are not changed when they are pressed. 
To disable the buttons, press and hold down the  S and  T...

ViewSonic CD4620  23 
OSD (On-Screen-Display) Controls 
 
Remote 
Control Press MENU button to 
open Main menu. Press 
S or  T button to select 
sub-menu.
 
Press ENTER button to 
decide. Press  S or  T, and  W or 
X  button to select 
function, or control which 
you like. Press ENTER 
button to decide.
 
Press MENU or EXIT 
button to exit. 
     
     
Control 
Panel Press EXIT button to 
open Main menu. Press 
S  or  T button to select.
 
Press INPUT button to 
decide Press  S or  T, and  ﹢ 
or  –...

ViewSonic CD4620  24 
PICTURE 
 
  
BRIGHTNESS 
y
  Adjusts the overall image  and background screen brightness. 
y   Press + button to increase brightness. 
y   Press - button to decrease brightness. 
 
CONTRAST 
y  Adjusts the image brightness in relation to the input signal. 
y   Press + button to increase contrast. 
y   Press - button to decrease contrast. 
 
SHARPNESS 
y  This function is digitally capabl e to keep crisp image at any timings. 
y   It is adjustable to get a distinct image or a soft...

ViewSonic CD4620  25 
SCREEN 
 
  
H POSITION y
  Controls Horizontal Image position within the display area of the LCD. 
y   Press + button to move screen to right. 
y   Press - button to move screen to left. 
 
V POSITION y  Controls Vertical Image position wi thin the display area of the LCD. 
y   Press + button to move screen to UP. 
y   Press - button to move screen to DOWN. 
 
CLOCK 
* : INPUT RGB3,4 only y  Press + button to expand the width of the image on the screen the right. 
y   Press -...

ViewSonic CD4620  26 
AUDIO
 
 
  
BALANCE 
y
  Adjust the balance of L/R volume. 
y   Press + button to move the stereo sound image to right. 
y   Sound of the left side will be small. 
y   Press - button to move the stereo sound image to left. 
 
TREBLE 
y  To accentuate or reduce the high frequency sound. 
y   Press + button to increase TREBLE sound. 
y   Press - button to decrease TREBLE sound. 
 
BASS 
y  To accentuate or reduce the low frequency sound. 
y   Press + button to increase BASS sound....

ViewSonic CD4620  27 
PIP (PICTURE IN PICTURE) 
Note: The “PIP” and “POP” modes do not function when the screen size is “CUSTOM” or “REAL”.  
  
PIP SIZE 
y
  Selecting the size of picture inserted at  the “Picture-in-Picture” (PIP) mode.   
y   “Large”, “Middle” and “Small” are available. 
 
PIP AUDIO 
y  Selecting the sound source in PIP mode. 
y   When selecting “MAIN AUDIO”, you will get the sound for the main picture and when selecting “PIP AUDIO”, you will get the 
sound for the picture instead....