ViewSonic Cd3200 Users Guide

ViewSonic CD3200 18 
* How do I connect a Video device via HDMI - HDMI ? 
   
This can be applied only if there is the HDMI Output connector on the   
external device. 
Note:    1. No sound connector is needed for a HDMI to HDMI connection. 
 
       2. Connecting cables above are not supplied. 
 
 
 
 
 
 
 
 

ViewSonic CD3200 19 
* How do I connect a PC via D-SUB ? 
 
 
 
 
1.  Connect a VGA cable between the D-SUB connector on the LCD and the 
D-SUB connector on PC. 
 
2.  Connect an audio cable between the PC AUDIO IN jack on the LCD and 
AUDIO OUT jack on PC. 
 
3.  Cables are not included.   
 
 

ViewSonic CD3200 20 
* How do I connect a video device via general cables? 
 
 
 
 
 
 
   Note: Cables are not supplied. 
SubwooferS/PDIF
This LCD accepts different video input, if video device has a connector with 
better quality, please connect the better one. The sequence of video quality 
from the best to the normal is Componet, Scart, S-Video.   
 

ViewSonic CD3200 21 
8 8
. .
G GE E
N N
E E
R R
A A
L L
   C CO O
N N
T T
R R
O O
L L
S S
   & &   A AD D
J J
U U
S S
T T
M M
E E
N N
T T   
TURNING THE LCD DISPLAY ON AND OFF  
1. Press the POWER button on the Remote Control. 
2. You can also use the POWER button at the right of the panel.   
 
VOLUME CONTROL 
Using Volume Control 
Press VOL▲ / VOL▼ button to turn up or turn down the sound volume.   
 
Using Mute 
At any time, users can temporarily turn off the sound   
by pressing the MUTE button. 
1....

ViewSonic CD3200 22 
SWITCHING PC / HDMI / VIDEO / SCART MODES  
 
1. Turn on the power. 
2. Select an input source as described below: 
 
 
PC/HD button     
 
VIDEO button     
 
 
SCART button    
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
Source 
button 
 
switch to PC , HDMI mode  
 
switch to AV / SV / YPBPR mode 
(Composite, Y/C and Component signal) 
 
switch to SCART 1, SCART 2, SCART 2S 
 
 

ViewSonic CD3200 23 
VIEWING THE MENUS AND ON-SCREEN DISPLAYS 
1.  With the power on, press the MENU button. The main menu appears on 
the screen. 
 
 
 
 
 
 
 
 
 
2. Use the W / X button to select one of the menu options, and then press 
the S / T button to access the sub-menu. 
 
3. Press the W / X  button to make adjustments. 
 
4. Press EXIT/INFO button to exit from the menu. 
 
Note: The menu varies according to which input source is selected. 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
SELECTMOVEEXITEXIT...

ViewSonic CD3200 24 
PICTURE SETTING 
 
You may need to perform separate adjustments for brightness and contrast 
for the different video modes. Typically, PC mode will be best viewed with 
lower brightness and contrast settings than are appropriate for the other 
modes. 
 
1. Press the MENU button to display PICTURE from the main menu.     
 
2. Press the S / T button to select the desired item. 
 
3. Press the W / X button to adjust ranges from minimum to   
maximum. 
 
4. Press the EXIT/INFO button to...

ViewSonic CD3200 25 
PICTURE SETTINGS:   
 
CONTRAST: Increase and decrease picture contrast   
BRIGHTNESS: Adjust picture brightness 
BACKLIGHT: Adjust the back light level of screen 
HUE:  
COLOR: Adjust picture color 
SHARPNESS: Adjust image 
COLOR MODE:  
1. Press the S / T buttons to select COLOR MODE option, and then 
press the X button to enter the COLOR TEMP. sub-menu. 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
2. Press the X button to choose the color of picture mode. [NORMAL], 
[WARM], [COOL], [MANUAL]....

ViewSonic CD3200 26 
3. Press S / T buttons to move USER-R/G/B and then press the X 
button to enter the desired setting. 
USER-R: adjust color of red rate. 
USER-G: adjust color of green rate. 
USER-B: adjust color of blue rate. 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 

ViewSonic CD3200 27 
SOUND ADJUSTMENT 
1. Press the MENU button to display SOUND from the main menu. 
2. Press the S / T button to move to one of the sub-menu options. 
3. Press the W / X button to select the settings. 
4. Press the EXIT/INFO button to return to the previous screen. 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
  SOURCE: Choose the sound source from the [MAIN] or [SUB] display. 
You can enable this function while in PIP (picture in picture) or POP 
(picture of picture).   
AVC: You can set AVC (Auto...