Vidikron Projector Vision Model 85 User Manual
Have a look at the manual Vidikron Projector Vision Model 85 User Manual online for free. It’s possible to download the document as PDF or print. UserManuals.tech offer 45 Vidikron manuals and user’s guides for free. Share the user manual or guide on Facebook, Twitter or Google+.
Serial Communications Vidikron Vision 85 Owner’s Operating Manual 69 PREL IMINARY Miscellaneous Commands BKGND-100/100YESSets the background color for 4:3 aspect ratio (-100 = black; 100 = white) BKGND?NANAReturns background setting value DATE?NANAReturns projector manufacture date HDINPUTRESNAYESSets YPbPr input resolution and refresh rate for HD1/HD2, as follows: 0 = 480i 1 = 480p 2 = 576i 3 = 576p 4 = 720p / 60 Hz 5 = 1080i / 60 Hz 6 = 720p / 50 Hz 7 = 1080i / 25 Hz Any other value = Auto HWVER?NANAReturns hardware version number INRES?NANAReturns input resolution LENS1?NANAReturns Lens 1 configuration RGBNNNANASets output color space to RGB with negative horizontal and vertical sync RGBPPNANASets output color space to RGB with positive horizontal and vertical sync RGBSNANASets output color space to RGB with composite sync STATUSNANAReturns current operating status (power, input source, input resolution and input aspect ratio) SWVER?NANAReturns software version number TRIGGER1/3YESAssigns trigger to currently-selected aspect ratio Table 6-1. Serial Commands (continued) CommandParameter (min/max)Value Stored?Description
Serial Communications 70 Vidikron Vision 85 Owner’s Operating Manual PREL IMINARY The following serial commands are meant to emulate buttons on the remote control or VHD Controller front panel. Each button has its own serial command, so effectively it is as if you were using the IR remote only you’ll be doing so via serial commands. These commands provide active OSD responses just like the IR remote. DOWNNANADown-Arrow () key ENTERNANAENTER key LEFTNANALeft-Arrow () key MENUNANAMENU RIGHTNANARight-Arrow () key UPNANAUp-Arrow () key Table 6-1. Serial Commands (continued) CommandParameter (min/max)Value Stored?Description
Vidikron Vision 85 Owner’s Operating Manual 71 PREL IMINARY 7.1 Vision 85 Specifications Table 7-1 lists the Vision 85 specifications. 7Specifications Table 7-1. Vision 85 Specifications Projector Type:Digital Light Processing (DLP), single-chip, 16:9 DMD Native Resolution:1920 x 1080 (16:9) Aspect Ratios:Refer to Table 7-2 Video Standards:Refer to Table 7-2 DTV Compatibility:480p, 720p, 1080i, 1080p Scan Frequency:Horizontal: 15 - 81 kHz Vertical: 43 - 100 Hz Picture Size (16:9 Screen):Recommended Width: 72 - 96 in. Maximum Width: 200 in. Throw Distance (Factor x Screen Width):Vision 85: 1.86 to 2.45 Vision 85/CineWide: 1.92 to 2.45 Horizontal and Vertical Offset:Horizontal: None Vertical: 50% of screen height up or down Lamp:220 Watts Estimated Lamp Life: 2000 hours Inputs (from VHD Controller): (1) HDMI with HDCP, (1) RS-232
Specifications 72 Vidikron Vision 85 Owner’s Operating Manual PREL IMINARY Brightness and Contrast (variable, depending on VAC calibration):Cinema Standards Measurement System (CSMS) Specifications - Brightness: TBD - Contrast Ratio: TBD These measurements are taken from the projector in a controlled, home theater environment. All measurements are made to ANSI/NAPM IT7.228-1997 specifications using the Photo Research PR-650 SpectraColorimeter and Minolta LS-100 Luminance Meter, Video Essentials test DVD and a 1.3 gain, 72-inch wide screen. The projector is calibrated to a color temperature of 6,500K and has a minimum of 150 hours of usage. The foot-Lambert (fL) is the unit of measurement used in commercial movie theaters to express image brightness at the screen surface. The Society of Motion Picture and Television Engineers (SMPTE) specifies 16 fL as the target image brightness for film-based projectors using an open gate (without film in the projector). More importantly, today SMPTE specifies 12 fL as the target image brightness in Digital Cinema theaters. The foot-Lambert measurement is dependent on screen size, screen gain and projector light output. Home Theater Calibration Specifications - Light Output: TBD - Contrast Ratio: TBD These specifications are obtained by calibrating the projector as described above for CSMS measurements. Industry-Standard Specifications - Light Output: TBD - Contrast Ratio: TBD These are typical projector brightness and contrast specifications found in most companies’ sales literature. Vidikron includes these measurements in its literature to allow for direct comparison with other manufacturers’ projectors. These measurements are typically taken at 9,000K to 13,000K to get expected performance data when the projector is used in professional, commercial and industrial displays. Power Requirements: 100 to 240 VAC (auto-sensing), 50/60 Hz, 375 Watts Operating Environment:40°F to 95°F (5°C to 35°C), 0% to 90% humidity (non-condensing) Dimensions:See Figure 7-1 Weight (without lens):50 lbs. (22.68 kg) Regulatory Approvals:Complies with FCC, CE C-Tick Limited Warranty: Projector: Two (2) years parts and labor from the date of delivery to the end user. Lamp: 1000 hours or six (6) months, whichever comes first. Specifications are subject to change without notice. Table 7-1. Vision 85 Specifications (continued)
Specifications Vidikron Vision 85 Owner’s Operating Manual 73 PREL IMINARY 7.2 VHD Controller Specifications Table 7-2 lists the VHD Controller specifications. Table 7-2. VHD Controller Specifications Aspect Ratios: 4:3, Letterbox, 16:9, IntelliWide, Cinema, IntelliWide 2.35 Video Standards:NTSC, PAL Inputs: (1) Composite; (2) S-Video; (1) Component; (2) HD-R (Pr), G (Y), B (Pb), H, V; (2) HDMI with HDCP Outputs: HDMI with HDCP Control Options:- Discrete infrared remote - Serial commands via RS-232 - Front-panel controls RS-232 Communication Parameters: 19200 bps, no parity, 8 data bits, 1 stop bit, no flow control Trigger Outputs: (3) +12 VDC, each rated at 750 mA and thermal fuse-protected Bandwidth:150 Mega Samples per Second (MSPS) Power Requirements: 100 to 240 VAC (auto-sensing), 50/60 Hz, 160 Watts Operating Environment:40°F to 95°F (5°C to 35°C), 0% to 90% humidity (non-condensing) Dimensions:Width = 17.50 inches (444.5 mm) Depth = 11.19 inches (284.1 mm) Height = 3.75 inches (95.3 mm) Weight: 13.0 lbs. (5.90 kg) Regulatory Approvals:Complies with FCC, CE C-Tick Limited Warranty: Two (2) years parts and labor from the date of delivery to the end user. Specifications are subject to change without notice.
Specifications 74 Vidikron Vision 85 Owner’s Operating Manual PREL IMINARY 7.3 Vision 85 Dimensions Figure 7-1 shows the Vision 85 dimensions (all dimensions are in inches). Figure 7-1. Vision 85 Dimensions 7.59.4 22.86.5 1.0 0 2x 3.1 3x 5.5 3x 15.4 2x 19.5 0 2x 7.7 2x 12.0 2x 16.2 2x 18.3 2x 2.620.9Ø 1.1 21.6 22.8 20.9
Vidikron 2900 Faber Street Union City, CA 94587 510-324-5900 Fax 510-324-5905 1-888-4-VIDIKRON www.vidikron.com SERIAL NUMBER RUMA-011220 rev. 01-10-07 v1.0