Vidikron Projector Vision Model 60 User Manual
Here you can view all the pages of manual Vidikron Projector Vision Model 60 User Manual. The Vidikron manuals for Projector are available online for free. You can easily download all the documents as PDF.
Page 11
10 » Control Panel on the Projector �������� �������������������� �������� ����� ������������� �������������������� ����� ��� 1234 7 10 8 14 12 5 6 9 11 13 1516 1. LAMP BUTTON: Light On: Indicates the lamp has been used for more than 1900 hours. Blinking: Indicates the lamp has been used for more than 2000 hours. Please change the lamp. 2. TEMP BUTTON Blinking: Indicates the temperature inside the projector is abnormally high. 3. POWER BUTTON Light On: During projection. 4....
Page 12
1. Input Terminal This is an input terminal for component signals (Y, CB, CR) or DTV-format (Y, PB, PR) signals. Devices which have component signal output terminals can be connected. This terminal can also be used as multipurpose video input terminals that allow input of the following signals: analog RGB signals, vertical sync (V) signals, and horizontal sync (H) signals/ composite signals (Cs). Devices which have analog RGB signals output terminals can be connected. To use this...
Page 13
![Page 13
CONTROLS AND FEATURES
5. AUDIO IN
Not used.
6. REMOTE
When the remote control is unable to work due to rear projection etc., the [REMOTE] terminal can be used to connect an external sensor
to the projector. The external sensor is not generally sold. Check with your authorized Vidikron dealer.
7. CONTROL RS-232 IN/OUT
This is the RS-232 OUT interface-specific terminal. The projector can be controlled by a computer connected externally. More than one
projector can be controlled using both the [RS-232...](http://img.usermanuals.tech/thumb/5122/97173/w300_vidikron-vision-model-60-manual_d-12.png "Page 13
CONTROLS AND FEATURES
5. AUDIO IN
Not used.
6. REMOTE
When the remote control is unable to work due to rear projection etc., the [REMOTE] terminal can be used to connect an external sensor
to the projector. The external sensor is not generally sold. Check with your authorized Vidikron dealer.
7. CONTROL RS-232 IN/OUT
This is the RS-232 OUT interface-specific terminal. The projector can be controlled by a computer connected externally. More than one
projector can be controlled using both the [RS-232...")
CONTROLS AND FEATURES 5. AUDIO IN Not used. 6. REMOTE When the remote control is unable to work due to rear projection etc., the [REMOTE] terminal can be used to connect an external sensor to the projector. The external sensor is not generally sold. Check with your authorized Vidikron dealer. 7. CONTROL RS-232 IN/OUT This is the RS-232 OUT interface-specific terminal. The projector can be controlled by a computer connected externally. More than one projector can be controlled using both the [RS-232...
Page 14
13 2 4 6 10 14 13 17 20 23 24 1 3 5 7 9 11 12 15 16 18 19 21 22 8 » Remote Control CONTROLS AND FEATURES
Page 15
1. IR OUTPUT INDICATOR
Illuminates when a button in pressed, indicating that an IR signal is being transmitted.
2. ON
Switches Power ON. (This does not operate when POWER/STANDBY indicator of the main unit is off.)
3. DIRECT ACCESS BUTTONS
These red buttons to the right hand-side will allow you direct access to an aspect ratio, based on the format of the input signal.
These buttons are: ANA - selects Anamorphic (16:9) widescreen aspect ratio
LETBOX - selects Letterbox format aspect ratio...
Page 16
![Page 16
CONTROLS AND FEATURES
15
12. PC 16x9 BUTTON
Use this button to select 16x9 aspect ratio for computer signal.
13. PC 4x3 BUTTON
Use this button to select 4x3 aspect ratio for computer signal.
14. ENT (Enter) BUTTON
Press this button to show the next menu (For example, from main menu to sub-menu). It is also used when [ENTER] is displayed against
an item on the menu screen, or to choose the “Reset” option etc.
15. VIDEO BUTTON
Press this button to select VIDEO (composite video) as the source.
16. S-VID...](http://img.usermanuals.tech/thumb/5122/97173/w300_vidikron-vision-model-60-manual_d-15.png "Page 16
CONTROLS AND FEATURES
15
12. PC 16x9 BUTTON
Use this button to select 16x9 aspect ratio for computer signal.
13. PC 4x3 BUTTON
Use this button to select 4x3 aspect ratio for computer signal.
14. ENT (Enter) BUTTON
Press this button to show the next menu (For example, from main menu to sub-menu). It is also used when [ENTER] is displayed against
an item on the menu screen, or to choose the “Reset” option etc.
15. VIDEO BUTTON
Press this button to select VIDEO (composite video) as the source.
16. S-VID...")
CONTROLS AND FEATURES 15 12. PC 16x9 BUTTON Use this button to select 16x9 aspect ratio for computer signal. 13. PC 4x3 BUTTON Use this button to select 4x3 aspect ratio for computer signal. 14. ENT (Enter) BUTTON Press this button to show the next menu (For example, from main menu to sub-menu). It is also used when [ENTER] is displayed against an item on the menu screen, or to choose the “Reset” option etc. 15. VIDEO BUTTON Press this button to select VIDEO (composite video) as the source. 16. S-VID...
Page 17
16 INSTALLING THE PROJECTOR ����������������� ����������� ��������� ���������� �������������������������������� ����� ���������������������������������� �������������������������������� � ����� ������������� ��������� ������������� ��������������� ������ ������������������������� ��������������������������������������������������������� �������� ��������������� ���������������� ������������� ���������� ������� �� » Installing the Projector against the Screen
Page 18
������ � � � ���� � � � � � ������ ������������������������������������������������������ ������������� �������� ���� � ���������� ��� ����������� ������� ��� ����� � �� ������ ������ � ��� ����� � �� ������ ������ � ��� �� �������� ���������� �� �������� ���������� �� �������� ���������� �� �������� ���������� ����� � �� ������ ������ � ��� ����� � �� ������ ������ � ��� �� �������� ���������� �� ��� ������ ������ � ��� ����� � � �� ������ ���������� �� ��� ������ ������ � ��� ����� � � �� ������...
Page 19
![Page 19
CONNECTING TO VARIOUS DEVICES
18
» Signals that can be input into the projector
• Video Signals
(1) Response to Decoder
Input Terminal DecoderNTSCNTSC 4.43PALSECAM
[VIDEO]OOOO
[Y/C]OO*1O- - - - -
[Y], [PB/CB], [PR/CR]*3O*2O*2O*2O*2
[G], [B], [R], [H/CS], [V]*4O*2O*2O*2O*2
*1 : Responds if Y/C output is available.*2 : Signifies that component signals (Y, PB, PR/Y. B-Y, R-Y/G, B, R, H/CS, V) conform to the signal timing (synchronization and video
period) of each decoder....](http://img.usermanuals.tech/thumb/5122/97173/w300_vidikron-vision-model-60-manual_d-18.png "Page 19
CONNECTING TO VARIOUS DEVICES
18
» Signals that can be input into the projector
• Video Signals
(1) Response to Decoder
Input Terminal DecoderNTSCNTSC 4.43PALSECAM
[VIDEO]OOOO
[Y/C]OO*1O- - - - -
[Y], [PB/CB], [PR/CR]*3O*2O*2O*2O*2
[G], [B], [R], [H/CS], [V]*4O*2O*2O*2O*2
*1 : Responds if Y/C output is available.*2 : Signifies that component signals (Y, PB, PR/Y. B-Y, R-Y/G, B, R, H/CS, V) conform to the signal timing (synchronization and video
period) of each decoder....")
CONNECTING TO VARIOUS DEVICES
18
» Signals that can be input into the projector
• Video Signals
(1) Response to Decoder
Input Terminal DecoderNTSCNTSC 4.43PALSECAM
[VIDEO]OOOO
[Y/C]OO*1O- - - - -
[Y], [PB/CB], [PR/CR]*3O*2O*2O*2O*2
[G], [B], [R], [H/CS], [V]*4O*2O*2O*2O*2
*1 : Responds if Y/C output is available.*2 : Signifies that component signals (Y, PB, PR/Y. B-Y, R-Y/G, B, R, H/CS, V) conform to the signal timing (synchronization and video
period) of each decoder....
Page 20
![Page 20
19
CONNECTING TO VARIOUS DEVICES
• HDCP compatible signal
[RGB3 DVI] input terminal can accept HDCP compatible video signals (480p, 720p 60/59 Hz, 1080i 60/59 Hz). The menu is same as
when RGB input is selected.
• Allowable input signals
Signal
Horizontal
Resolution
Hor (Pixels)
Vertical
Resolution
Ver (Lines)
Horizontal Frequency
V (Hz)
Vertical Frequency
V (Hz)
PC98VESA35064035037.8684.13
PC/ATPC9864040024.8356.42
DOS/VVGA 60 Hz*64048031.4759394
DVI*VGA 72 Hz64048037.8672.81
VGA 75Hz64048037.5075.00...](http://img.usermanuals.tech/thumb/5122/97173/w300_vidikron-vision-model-60-manual_d-19.png "Page 20
19
CONNECTING TO VARIOUS DEVICES
• HDCP compatible signal
[RGB3 DVI] input terminal can accept HDCP compatible video signals (480p, 720p 60/59 Hz, 1080i 60/59 Hz). The menu is same as
when RGB input is selected.
• Allowable input signals
Signal
Horizontal
Resolution
Hor (Pixels)
Vertical
Resolution
Ver (Lines)
Horizontal Frequency
V (Hz)
Vertical Frequency
V (Hz)
PC98VESA35064035037.8684.13
PC/ATPC9864040024.8356.42
DOS/VVGA 60 Hz*64048031.4759394
DVI*VGA 72 Hz64048037.8672.81
VGA 75Hz64048037.5075.00...")
19 CONNECTING TO VARIOUS DEVICES • HDCP compatible signal [RGB3 DVI] input terminal can accept HDCP compatible video signals (480p, 720p 60/59 Hz, 1080i 60/59 Hz). The menu is same as when RGB input is selected. • Allowable input signals Signal Horizontal Resolution Hor (Pixels) Vertical Resolution Ver (Lines) Horizontal Frequency V (Hz) Vertical Frequency V (Hz) PC98VESA35064035037.8684.13 PC/ATPC9864040024.8356.42 DOS/VVGA 60 Hz*64048031.4759394 DVI*VGA 72 Hz64048037.8672.81 VGA 75Hz64048037.5075.00...