Vidikron Projector Vision Model 40 User Manual

							Vidikron Owner’s Manual
20
     
English
Installation For Vision Model 40 (With 1.38 - 1.63 Lens)  
Screen __________ (H) x __________ (W)
B) THROW DISTANCE:V40 16 x 9 Screens:
Minimum: (screen width x 1.38) = __________ inches
Maximum: (screen width x 1.63) = __________ inchesCeilingC) VERTICAL OFFSET:Screen width x 0.052 = _________ inches from the center of the lens.
5.51 in. (140 mm)
Floor 
4.89 in. (124.2 mm)
5.45 in. 
(138.4 mm) Between 6.10 - 27.36 in. (155 - 695 mm)
4.89 in. (124.2 mm) 
						

							     
English
Installation
   21
Throw Distance Chart For Vision Model 40 (With 1.38 - 1.63 Lens)
Vision Model 40 @ 1280 x 720    
Screen Height Screen Width Min Throw DistanceMax Throw 
DistanceVertical Offset 
Position
40.5 72 99.36 117.36 3.74
43 77 106.26 125.51 4.00
45 80 110.40 130.40 4.16
47 84 115.45 136.37 4.35
49 87 120.06 141.81 4.52
50 89 122.82 145.07 4.63
51.5 92 126.96 149.96 4.78
52 93 128.34 151.59 4.84
54 96 132.48 156.48 4.99
56 100 138.00 163.00 5.20
58 103 142.14 167.89 5.36
58.5 104 143.52 169.52 5.41
60 107 147.66 174.41 5.56
61 109 150.42 177.67 5.67
63 112 154.56 182.56 5.82
65 116 160.08 189.08 6.03
67.5 120 165.60 195.60 6.24
72 128 176.64 208.64 6.66
80 142 195.96 231.46 7.38
82 146 201.48 237.98 7.59
90 160 220.80 260.80 8.32
Screen Hight Screen Width Min TD  Max TD  Vertical Offset
(SWx1.38) (SWx1.63) Screen Width x 0.052 
						

							Vidikron Owner’s Manual
22
     
English
Installation For Vision Model 40ET (With 1.83 - 2.40 Lens)
C) VERTICAL OFFSET:Two inches offset means that the center of the projection lens is 2 above
the top of the screen (inverted ceiling) or 2 below the bottom of
the screen (upright floor mount). Screen __________ (H) x __________ (W)
B) THROW DISTANCE:V40ET 16 x 9 Screens:
Minimum: (screen width x 1.83) =  __________ inches
Maximum: (screen width x 2.40) = __________ inches 
						

							     
English
Installation
   23
Throw Distance Chart For Vision Model 40ET (With 1.83 - 2.40 Lens)
Vision Model 40ET @ 1280 x 720    
Two inches offset means that the center of the projection lens is 2” above the top of the screen (inverted ceiling) or 2” below the bottom of the
screen (upright floor mount).
Screen Height Screen Width Min Throw DistanceMax Throw 
DistanceVertical Offset 
Position
40.5 72 131.76 172.80 2.0
43 77 140.91 184.80 2.0
45 80 146.40 192.00 2.0
47 84 153.10 200.78 2.0
49 87 159.21 208.80 2.0
50 89 162.87 213.60 2.0
51.5 92 168.36 220.80 2.0
52 93 170.19 223.20 2.0
54 96 175.68 230.40 2.0
56 100 183.00 240.00 2.0
58 103 188.49 247.20 2.0
58.5 104 190.32 249.60 2.0
60 107 195.81 256.80 2.0
61 109 199.47 261.60 2.0
63 112 204.96 268.80 2.0
65 116 212.28 278.40 2.0
67.5 120 219.60 288.00 2.0
72 128 234.24 307.20 2.0
80 142 259.86 340.80 2.0
82 146 267.18 350.40 2.0
90 160 292.80 384.00 2.0
Screen Hight Screen Width Min TD Max TD Vertical Offset
(SWx1.83) (SWx2.40) 2.00” 
						

							Vidikron Owner’s Manual
24
     
English
Connecting
When connecting, make sure to:
1. Turn off all equipment before making any connections.
2. Use the correct signal cables for each source.
3. Ensure the cables are firmly connected.  
						

							     
English
Connecting
   25
Connecting Video InputsVideo / S-Video / Component (Interlaced Video)   
DVD Player 
						

							Vidikron Owner’s Manual
26
     
English
Progressive Component (DTV Y/P
B/PR)   
DTV Source 
						

							     
English
Connecting
   27
RGBHV (DTV RGB)
The RGB BNC input supports two kinds of HDTV formats: Progressive component (DTV Y/P
B/PR) and DTV RGB. The unit will detect the 
resolution automatically.
DTV Source 
						

							Vidikron Owner’s Manual
28
     
English
Connecting a Computer or HDCP Compatible Video Device With DVI-I Output
This unit is compatible with the following computer resoultions: 1280x720, 1024x768, 800x600, 640x480.
PC, Notebook, set top box 
or other video device with 
DVI output 
						

							     
English
Basic Operation
   29
Basic Operation
Turning on the Power  
■
The Power LED lights orange when power is applied and the power switch is turned 
on.
  
■
Press and hold the ON key on the remote control or the Power key on the projector 
for ONE second to turn on the unit. The POWER LED will blink orange during 
warm up period, then light solid green. 
■
 Searching…. will be displayed on the screen before the projector identifies the 
input signal. This message will remain on the screen until a valid signal is detected. 
■
If an incompatible input signal exceeds the range of the projector a Not supportive 
timing message will be displayed on the screen. This message will remain on the 
screen until you change the input signal.