Vidikron Projector Vision Model 40 User Manual

Vidikron Owner’s Manual
10
     
English
Projector Exterior ViewFront / Upper Side 1. Front Lamp Cover 
Remove this cover when replacing the lamp. (See page 43.)
2. Projection Lens
3. Front IR Sensor 
4. Ventilation Holes (intake)
5. Ventilation Holes (exhaust)
6. Focus Ring and Zoom Ring Access
Adjusts the focus and zoom of image.
7. Control Panel
Shows lamp status and whether the projector is on or off.
For more details, see Control Panel on page 12.
8. Kensington Lock
This lock can withstand 150 N of...

English
Overview   11
Rear / Bottom Side1. Connector Panel
For more details, see Connector Panel on page 14.
2. Back IR Sensor
3. AC Power IN Socket
4. AC Power Switch
AC main power switch.
5. Ventilation Holes (exhaust) 6. Ventilation Holes (intake)
7. Rear Adjusters
Adjusts the height or projection angle. 
8. Front Adjusters 
Adjusts the height or projection angle.
9. Ceiling Mount Holes
The connecting holes fo
r ceiling mount device. 

Vidikron Owner’s Manual
12
     
English
Controls and FunctionsControl Panel  

     
English
Overview
   13   
  
1. STANDBY/ON
Press this key for ONE second to turn on the unit when it is in the 
standby mode. Or press this key to turn off this unit when it is on.
2. INPUT 
Switches input sources sequentially.
3. MEMORY 
Sequentially recalls settings 1 ~ 3 saved to memory. (Please see 
Selecting Video Memory on page 30.)
4. MENU
Turns the on-screen display control menu on or off.
5. ENTER
Enters settings for items shown in the menu.
6. EXIT
Exits and saves the setting(s) of items...

Vidikron Owner’s Manual
14
     
English
Connector Panel 
1. Video (RCA Jack) 
Composite video signal input.
2. S-Video (mini DIN 4-pin)
Y/C (S-video) signal input
3. Component (RCA Jacks)
480i Component (Y/C
B/CR) video signal input 
4. RGB/ HDTV (BNC) or Progressive Scan DVD players
DTV Y/P
B/PR or DTV RGB video signal input.
5. DVI-I
Digital/ Analog signal input.
6. RS-232C (RJ-11 Jack)
RS-232C control signal input.
7. 12v Trigger (mini jack with the diameter of 5.5 mm outside and 2.5 mm inside) 
+12V...

     
English
Overview
   15
Remote Control 
ON Hold down this button for ONE second to turn 
on the unit.OFFPress this button to turn off the unit.
ARROW (c,e,d,f)Use to select the menu or to make various 
adjustments. ENTEREnter the setting of items in the menu.
MEMORY
M1, M2, M3, DEFAULT
Recall video memory sequentially (see Selecting 
Video Memory on page 30)
INPUT SELECT
VIDEO
Composite video signal inputS-VIDEOS-Video signal input  COMPComponent Y/C
B/CR input
COMP HDDTV Y/P
B/PR signal input
RGB...

Vidikron Owner’s Manual
16
     
English
 
PICTURE IN PICTURE
PIP (Picture in Picture)
Enable the PIP function. Use ARROW keys to 
adjust the position of the PIP window (see PIP/ 
POP function on page 32)PIP+Enlarge the size of PIP window.PIP-Shrink the size of PIP window.ACTIVESwitch to the active window in PIP display 
mode. POP (Picture On Picture)Enable the POP function.EXITExit and save the setting(s) of items in the menu.MENUTurns on/off the on-screen display menu.
ASPECT RATIO
ANAMORPHIC
For 16: 9...

     
English
Installation
   17
Installation
Remote Control 
Notes on Batteries■
Make sure that the battery polarities are correct when installing the batteries.
■
Do not mix an old battery with a new one or different types of batteries.
■
If you will not use the remote control for a long time, remove the batteries to avoid damage from battery leakage. 
Notes on Remote Control Operation■
Make sure that there is nothing obstructing the infrared beam between the remote control and the IR receiver on the...

Vidikron Owner’s Manual
18
     
English
ProjectorConnect the Power Cord 
Plug the supplied power cord into the AC inlet in the rear of this unit. (AC 100V ~ 240V)
Turn on the main power switch on the rear of this unit (next to the AC inlet). The POWER LED 
will light up in orange. Press ON key on the remote control for ONE second to turn on the unit.
Adjust the Lens Zoom/Focus ring 
Adjust the projected image size you need with the zoom ring on the lens. 
To focus the image, rotate the focus ring on the...

     
English
Installation
   19
Adjust the height 
There are 4 screw adjusters on the bottom of this unit. You can adjust the height or
projection angle of this unit by using these adjusters.