Vidikron Projector Vision Model 140 User Manual

Controls and Functions
Vision Model 140/150 Owner’s Operating Manual 9 
PREL
IMINARY
9.Menu Navigation Buttons:  
 
UP BUTTON ()  
Used to move the menu cursor up in the Vision 140/150 menu system. 
 
LEFT BUTTON ()  
Used to move the menu cursor left in the Vision 140/150 menu system. 
 
DOWN BUTTON () 
Used to move the menu cursor down in the Vision 140/150 menu system. 
 
RIGHT BUTTON () 
Used to move the menu cursor right in the Vision 140/150 menu system.  
 
ENTER BUTTON 
When an item is...

Controls and Functions
10 Vision Model 140/150 Owner’s Operating Manual
PREL
IMINARY
2.4 
VHD Controller Front 
Panel
Figure 2-4 shows the controls and indicators on the VHD Controller front panel; the 
paragraphs that follow describe them. 
Figure 2-4. VHD Controller Front Panel
1.POWER BUTTON 
Press once to toggle from standby mode to on mode. Press it again to return to standby 
mode. For a discrete on or off command, you can use the direct access buttons on the 
remote control. 
2.IR SENSOR 
Receives...

Controls and Functions
Vision Model 140/150 Owner’s Operating Manual 11 
PREL
IMINARY
2.5 
VHD Controller Rear Panel
Figure 2-5 shows the rear connector panel on the VHD Controller.
Figure 2-5. VHD Controller Rear Panel
Outputs1.HDMI OUT 
Connect this to Input 2 (DVI) on the Vision 140/150 (see Figure 2-2). 
Inputs2.HDMI 1 / HDMI 2 (Digital) 
Two, HDCP-compliant digital video inputs for connecting a DVD player or HD tuner with 
a DVI or HDMI output.
3.HD1 / HD2 (5 x Analog BNCs) 
Two inputs (five BNCs...

Controls and Functions
12 Vision Model 140/150 Owner’s Operating Manual
PREL
IMINARY
9.IR 
Wired input from a wired remote control or infrared receiver. It is a 3.5-mm, mini phono 
jack, wired as follows:
 
Ring = +5V 
Tip = IR Input 
Sleeve = Ground 
10.RS-232 CONTROL PORT 
A female, 9-pin D-sub connector for interfacing with a PC or home theater 
automation/control system. 
11.POWER INPUT (100 to 240 VAC) 
Connect the VHD Controller to power here. 
12.MAIN AC FUSE 
This is the main AC input fuse (5mm x...

Controls and Functions
Vision Model 140/150 Owner’s Operating Manual 13 
PREL
IMINARY
2.6 
Vision 140/150 Remote 
Control Unit 
Figure 2-6 shows the Vision 140/150 remote control, and the paragraphs that follow describe 
its functionality.
Figure 2-6. VHD Controller/Vision 140/150 Remote Control
1
2
7
10
14
19
22 1611 43
5
6
8
12
17
18
20
21 139
15 

Controls and Functions
14 Vision Model 140/150 Owner’s Operating Manual
PREL
IMINARY
1.IR OUTPUT INDICATOR 
Lights when a button is pressed to indicate that an IR signal is being transmitted.
2.LIGHT  
Press to illuminate the buttons.
3.ON / OFF 
Press to turn the projector on or off.
4.ENT (Enter) 
Press to select a highlighted menu item or confirm a changed setting. 
5.Cursor Buttons (, , , )  
Use these buttons to select items or settings, adjust settings or switch display patterns. 
 
When no menu is...

Controls and Functions
Vision Model 140/150 Owner’s Operating Manual 15 
PREL
IMINARY
Memory Preset Buttons:
8.ISF NT (Night) 
Press to recall settings for the current input from the “ISF Night” memory preset. 
9.ISF DAY 
Press to recall settings for the current input from the “ISF Day” memory preset.
10.CUST 2 
Press to recall settings for the current input from the “Custom 2” memory preset.
11.CUST 1 
Press to recall settings for the current input from the “Custom 1” memory preset. 
12.VIDEO (1) 
Press...

Controls and Functions
16 Vision Model 140/150 Owner’s Operating Manual
PREL
IMINARY
Notes: 

Vision Model 140/150 Owner’s Operating Manual 17 
PREL
IMINARY
3.1 
Remote Control
Battery InstallationTo install batteries in the remote control: 
1. Remove the battery cover from the back of the remote control. 
2. Insert the batteries included with the remote control. Ensure that the polarities correctly 
match the 
 and  markings inside the battery compartment. 
3. Replace the battery cover. 
Notes on Remote Control 
Operation
The remote control can be used to control the Vision 140/150 within the...

Installation
18 Vision Model 140/150 Owner’s Operating Manual
PREL
IMINARY
 Do not drop the remote control or expose it to moisture or high temperature.
 The remote control may malfunction under a fluorescent lamp. If that occurs, move the 
VHD Controller away from the fluorescent lamp.
 Make sure that there is nothing obstructing the infrared beam between the remote 
control and the IR receiver on the VHD Controller or projector.
 If the effective range of the remote control decreases, or it stops...