Vidikron Projector Vision Model 120 User Manual
Have a look at the manual Vidikron Projector Vision Model 120 User Manual online for free. It’s possible to download the document as PDF or print. UserManuals.tech offer 45 Vidikron manuals and user’s guides for free. Share the user manual or guide on Facebook, Twitter or Google+.
Serial Communications Vidikron Vision Model 120 Owner’s Operating Manual 69 PREL IMINARY Image Preset Commands SISF 0Loads “ISF Night” image presetISF Night SISF 1Loads “ISF Day” image presetISF Day SISF 2Loads “Custom 1” image presetCustom 1 SISF 3Loads “Custom 2” image presetCustom 2 Menu Navigation Commands The following serial commands are meant to emulate buttons on the remote control or VHD Controller front panel. Each button has its own serial command, so effectively it is as if you were using the IR remote only you’ll be doing so via serial commands. These commands provide active OSD responses just like the IR remote. ENTRENTER (or SELECT) button (none) EXITEXIT button MENUMENU button MNDDown-Arrow () button MNLLeft-Arrow () button MNRRight-Arrow () button MNUUp-Arrow () button Picture Adjust Commands The following serial commands are meant to emulate the discrete picture adjustment buttons on the remote control unit. Use them in conjunction with MNL and/or MNR to make picture adjustments. For example, to increase Brightness by five increments, send this sequence of commands: MBR MNR MNR MNR MNR MNR EXIT MBRAdjust Brightness (none) MCOLAdjust Color Level MCONAdjust Contrast MTINAdjust Tint Table 6-1. Serial Commands and Responses (continued) Command Description Response
Serial Communications 70 Vidikron Vision Model 120 Owner’s Operating Manual PREL IMINARY Notes:
Vidikron Vision Model 120 Owner’s Operating Manual 71 PREL IMINARY 7.1 Vision 120 Specifications Table 7-1 lists the Vision 120 specifications. 7Specifications Table 7-1. Vision 120 Specifications Projector Type:Digital Light Processing (DLP), 3-chip, 16:9 DMD Native Resolution:1920 x 1080 (16:9) Aspect Ratios:Refer to Table 7-2 Video Standards:Refer to Table 7-2 DTV Compatibility:480i/576i, 480p, 576p, 1080i 50/60, 720p 50/60,1080p 24/50/60, 1080psf Scan Frequency:Horizontal: 15 - 100 kHz Vertical: 28 - 78 Hz Picture Size (16:9 Screen):Recommended Width: 72 - 120 in. Maximum Width: 250 in. Throw Distance (Factor x Screen Width):Refer to Table 3-3 Horizontal and Vertical Offset:Refer to Table 3-4 Lamp:300W UHP Estimated Lamp Life: 2000 hours Input: DVI-DL (Dual-Link) with HDCP (from VHD Controller) Controls:Built-in keypad
Specifications 72 Vidikron Vision Model 120 Owner’s Operating Manual PREL IMINARY Brightness and Contrast: Cinema Standards Measurement System (CSMS) Specifications - Brightness: 58.3 foot-Lamberts (fL) - Contrast Ratio: 320:1 These measurements are taken from the projector in a controlled, home theater environment. All measurements are made to ANSI/NAPM IT7.228-1997 specifications using the Photo Research PR-650 SpectraColorimeter and Minolta LS-100 Luminance Meter, Video Essentials test DVD and a 1.3 gain, 72-inch wide screen. The projector is calibrated to a color temperature of 6,500K and has a minimum of 150 hours of usage. The foot-Lambert (fL) is the unit of measurement used in commercial movie theaters to express image brightness at the screen surface. The Society of Motion Picture and Television Engineers (SMPTE) specifies 16 fL as the target image brightness for film-based projectors using an open gate (without film in the projector). More importantly, today SMPTE specifies 12 fL as the target image brightness in Digital Cinema theaters. The foot-Lambert measurement is dependent on screen size, screen gain and projector light output. Home Theater Calibration Specifications - Light Output: 1380 ANSI Lumens - Contrast Ratio: 320:1 These specifications are obtained by calibrating the projector as described above for CSMS measurements. Industry-Standard Specifications - Light Output: 2825 ANSI Lumens - Contrast Ratio: 4000:1 These are typical projector brightness and contrast specifications found in most companies’ sales literature. Vidikron includes these measurements in its literature to allow for direct comparison with other manufacturers’ projectors. These measurements are typically taken at 9,000K to 13,000K to get expected performance data when the projector is used in professional, commercial and industrial displays. Power Requirements: 100 to 240 VAC (auto-sensing), 50/60 Hz, 530 Watts Operating Environment:41°F to 95°F (5°C to 35°C), 0% to 90% humidity (non-condensing) Dimensions:See Figure 7-1 Weight (without lens):99.21 lbs. (45.00 kg) Regulatory Approvals:Complies with FCC, CE C-Tick Limited Warranty: Projector: Two (2) years parts and labor from the date of delivery to the end user. Lamp: 1000 hours or six (6) months, whichever comes first. Specifications are subject to change without notice. Table 7-1. Vision 120 Specifications (continued)
Specifications
Vidikron Vision Model 120 Owner’s Operating Manual 73
PREL
IMINARY
7.2
VHD Controller
Specifications
Table 7-2 lists the VHD Controller specifications.
Table 7-2. VHD Controller Specifications
Aspect Ratios: 4:3, Letterbox, 16:9, IntelliWide, Cinema, IntelliWide 2.35
Video Standards:NTSC, NTSC 4.43, PAL B/G/H/I/M/N , SECAM
Output Resolution:1080p
Inputs: (1) Composite
(1) S-Video
(1) HD Video, R (Pr), G (Y), B (Pb), H, V - RCA connectors
(1) HD Video/Computer, R (Pr), G (Y), B (Pb), H, V - BNCs
(1) HD Video/Computer, R (Pr), G (Y), B (Pb), H, V -
15-pin D-Sub connector
(2) HDMI with HDCP
Output: DVI-DL (Dual-Link) with HDCP
Control Options:- Discrete infrared remote
- Serial commands via RS-232 interface
- Front-panel controls
RS-232 Communication
Parameters: 19200 bps, no parity, 8 data bits, 1 stop bit, no flow control
Trigger Outputs: (3) +12 VDC, each rated at 750 mA and thermal fuse-protected
Bandwidth:150 Mega Samples per Second (MSPS)
Power Requirements: 100 to 240 VAC (auto-sensing), 50/60 Hz, 160 Watts
Operating Environment:41°F to 95°F (5°C to 35°C), 0% to 90% humidity
(non-condensing)
Dimensions:Width = 17.50 inches (444.5 mm)
Depth = 11.19 inches (284.1 mm)
Height = 3.75 inches (95.3 mm)
Weight: 13.0 lbs. (5.90 kg)
Regulatory Approvals:Complies with FCC, CE C-Tick
Limited Warranty: Two (2) years parts and labor from the date of delivery to the end
user.
Specifications are subject to change without notice.
Specifications 74 Vidikron Vision Model 120 Owner’s Operating Manual PREL IMINARY 7.3 Vision 120 Dimensions Figure 7-1 shows the Vision 120 dimensions (all dimensions are in inches). Figure 7-1. Vision 120/CineWide with AutoScope Dimensions 0 2.476.44 17.6918.65 23.60 12.18 7.60 16.76 4.89 0 1.65 8.43 8.96 0 5.36 6.01 1.21 9.09 7.39 19.55 30.29 0 1.65 4.00 14.73 12.44 23.55 30.29 9.00 0 7.01 11.72 15.97 20.22 29.66 29.08 22.90 23.97 10.74 30.41 35.41 36.32 32.49 3.00
Vidikron 2900 Faber Street Union City, CA 94587 510-324-5900 Fax 510-324-5905 1-888-4-VIDIKRON www.vidikron.com SERIAL NUMBER RUMA-011255 rev. 07-27-07 v1.0