Vidikron Projector Vision Model 10 User Manual
Have a look at the manual Vidikron Projector Vision Model 10 User Manual online for free. It’s possible to download the document as PDF or print. UserManuals.tech offer 45 Vidikron manuals and user’s guides for free. Share the user manual or guide on Facebook, Twitter or Google+.
Vidikron Vision Model 10/Model 12 Owner’s Operating Manual 1 PREL IMINARY 1.1 About This Manual This Owner’s Manual describes how to install, set up and operate the Vidikron Vision Model 10 and Model 12 DLP Projectors. Throughout this manual, the Vidikron Vision 10/Vision 12 DLP Projector is referred to simply as the “Vision 10/12.” Target AudienceVidikron has prepared this manual to help home theater installers and end users get the most out of the Vision 10/12. Vidikron has made every effort to ensure that this manual is accurate as of the date it was printed. However, because of ongoing product improvements and customer feedback, it may require updating from time to time. You can always find the latest version of this and other Vidikron product manuals on-line, at www.vidikron.com. If You Have Comments About This Manual... Vidikron welcomes your comments about this manual. Send them to [email protected]. Textual and Graphic Conventions Text Conventions: The following conventions are used in this manual, in order to clarify the information and instructions provided: Remote control button identifiers are set in upper-case bold type; for example, “Press EXIT to return to the previous menu.” All keys with functional names are initial-capped, set in bold type and enclosed in angle brackets. These keys are the following: , , , and . indicates that you may press either the RETURN or ENTER key on your computer keyboard if it has both keys. Computer input (commands you type) and output (responses that appear on-screen) is shown in monospace (fixed-width) type; for example: “To change the aspect ratio to Letterbox, type RRD02.” In addition to these conventions, underlining, boldface and/or italics are occasionally used to highlight important information, as in this example: 1Introduction A carriage return must be used after each command or string.Note
Introduction 2 Vidikron Vision Model 10/Model 12 Owner’s Operating Manual PREL IMINARY Graphic Conventions: These symbols appear in numerous places throughout the manual, to emphasize points that you must keep in mind to avoid problems with your equipment or injury: 1.2 Using This Manual Use the following table to locate the specific information you need in this manual. TIPS highlight time-saving short cuts and helpful guidelines for using certain features. NOTES emphasize text with unusual importance or special significance. They also provide supplemental information. CAUTIONS alert users that a given action or omitted action can degrade performance or cause a malfunction. WARNINGS appear when a given action or omitted action can result in damage to the equipment, or possible non-fatal injury to the user. DANGER appears when a given action can cause severe injury or death. Tip Note Caution WARNING DANGER! If you need...... Turn to page: Information about obtaining serviceiv General information about the Vision 10/Vision 12 DLP Projector3 Installation instructions13 First-time configuration instructions 30 Advanced configuration instructions46 Troubleshooting tips53 Vision 10/Vision 12 DLP Projector specifications57
Introduction Vidikron Vision Model 10/Model 12 Owner’s Operating Manual 3 PREL IMINARY 1.3 Description, Features and Benefits Vidikron proudly introduces its most affordable home theater projectors to date -- the Vision Model 10 and Model 12. The Vision 10/12 offers a performance feature set based on the latest generation of DLP™ light engines with Vidikron’s exclusive Imagix™ video processing technology to produce outstanding blacks, superior contrast performance, maximum screen brightness and an accurate color palette. The Vision 10/12 is equipped with a precision optics package (with manual zoom lens) plus generous horizontal/vertical mechanical lens shift capabilities and electronic keystone correction for flexible placement within virtually any home theater environment. Among the finest attributes of the Vision 10/12 is its ability to meet the rigid Imaging Science Foundation™ (ISF) industry standards for video fidelity and accurate gray scale tracking -- vital to achieving true-to-life color reproduction and superior black and white performance. The Vision 10/12 accepts high definition DVI (HDCP compliant) signals from today’s latest digital sources, and provides a generous array of component, composite, S-video and VGA inputs, as well as Discrete IR and RS-232 control allowing integration with other audio/video components and automated control systems. Key Features and BenefitsThe Vision 10/12 offers these key features and benefits: Native Resolution: 1024 x 576 (Model 10) or 1280 x 720 (Model 12) 16:9 Native Aspect Ratio High-performance Digital Light Processing (DLP™) engine DVI Input with High-bandwidth Digital Content Protection (HDCP) HDTV Ready
Introduction 4 Vidikron Vision Model 10/Model 12 Owner’s Operating Manual PREL IMINARY Parts List Your Vision 10/12 is shipped with the following items. If any items are missing or damaged, please contact your Vidikron dealer or Vidikron Customer Service at (888) 4VIDIKRON. Vision 10/Vision 12 DLP Projector Remote Control Unit and two (2), AAA-size batteries HD 15-pin VGA to HD 15-pin VGA cable DVI-D to DVI-D cable AC Power Cord Warranty information and registration card Vidikron Vision Model 10/Model 12 Owner’s Operating Manual (this document) Optional Accessories: Ceiling mount kit ➤
Vidikron Vision Model 10/Model 12 Owner’s Operating Manual 5 PREL IMINARY 2.1 Vision 10/12 at a GlanceFigure 2-1 and Figure 2-2 show the locations of key Vision 10/12 projector components. Front/Top/Side View Figure 2-1. Vision 10/12 Top/Front/Side View 2Controls and Functions 1 11 10 9 2 345678
Controls and Functions 6 Vidikron Vision Model 10/Model 12 Owner’s Operating Manual PREL IMINARY 1.TOP IR SENSOR 2.VERTICAL LENS SHIFT DIAL Shifts the image up or down. 3.INTAKE VENT 4.ADJUSTABLE FEET Use to adjust the height or projection angle. 5.VIDIKRON LOGO The logo can be rotated to match the projector orientation: inverted (ceiling-mounted) or upright. To rotate the logo, grip it at the sides, pull it away from the projector and rotate it 180 degrees. 6.FRONT IR SENSOR 7.FOCUS/ZOOM RING 8.EXHAUST VENT 9.HORIZONTAL LENS SHIFT DIAL 10.TEMPERATURE INDICATOR Flashes blue when the projector is overheated. 11.POWER INDICATOR Lights solid blue when the projector is in standby mode; flashes blue during cool-down. During normal operation, this LED is off.
Controls and Functions Vidikron Vision Model 10/Model 12 Owner’s Operating Manual 7 PREL IMINARY Rear/Top/Side View Figure 2-2. Vision 10/12 Rear/Top/Side View 1 8 7 234 6 109 5
Controls and Functions 8 Vidikron Vision Model 10/Model 12 Owner’s Operating Manual PREL IMINARY 1.COMPOSITE VIDEO INPUT Standard composite video input for connecting a VCR, camcorder, laser disc player or other composite video source. 2.S-VIDEO Standard S-Video input for connecting a DVD player, satellite receiver or Super VHS (S-VHS) VCR. 3.COMPONENT VIDEO (RCA connectors) Standard-definition (480i/576i) or high-definition (720p/1080i), YPrPb component input. This is the input for component video from sources such as DVD players. 4.RGB HD A 15-pin VGA connection to a personal computer. The Vision 10/12 automatically detects the signal resolution: 480i, 480p, 576i, 720p or 1080i. 5.DVI / Computer Input (Digital) HDCP-compliant digital video input for connecting a DVD player, personal computer or HD tuner with a DVI or HDMI output. 6.POWER INPUT (100 to 240 VAC) Connect the Vision 10/12 to power here. 7.RS-232 CONTROL PORT A female, 9-pin D-sub connector for interfacing with a PC or home theater automation/control system. 8.12-VOLT TRIGGER (3.5-mm mini phono jack) For connecting to retractable screens or other devices that respond to 12-volt triggers. Outputs +12 volts / 250 milliamps when the projector is turned on. 9.LAMP COVER 10.EXHAUST VENT For best results, do not run your DVD player in progressive mode.Tip
Controls and Functions Vidikron Vision Model 10/Model 12 Owner’s Operating Manual 9 PREL IMINARY 2.2 Vision 10/12 Remote Control Figure 2-3 shows the Vision 10/12 remote control, and the paragraphs that follow describe its functionality. Figure 2-3. Vision 10/12 Remote Control 1 2 3 4 5 6 7 8 9 10 15 14 13 12 11
Controls and Functions 10 Vidikron Vision Model 10/Model 12 Owner’s Operating Manual PREL IMINARY 1.ON / OFF Press to turn the projector on or off. 2.IR OUTPUT INDICATOR Lights when a button is pressed to indicate that an IR signal is being transmitted. 3.Source Selection Buttons: VIDEO Press to switch to the Composite video input. COMP 1 (Component 1) Press to switch to the Component 1 (480i/576i/720p/1080i) video input. RGB HD Press to switch to the RGB HD input. S-VID 1 (S-Video) Press to switch to the S-Video input. COMP 2 (Component 2) Press to switch to the Component 2 (480i/576i/720p/1080i) video input. DVI Press to switch to the Digital Video input. 4.Aspect Ratio Selection Buttons: ANA (Anamorphic) For viewing 16:9 DVDs or HDTV programs in their native aspect ratio. 4X3 (Standard 4:3) Scales the input signal to fit 4:3 display mode in the center of the screen. L-BOX (Letterbox) For viewing LaserDisc movies or non-anamorphic DVDs on a 4:3 screen. I-WIDE (IntelliWide) Enlarges a 4:3 image horizontally in a NON-linear fashion to fit 16:9 full screen display. CINEMA For viewing 2.35:1 source material on a 1.78:1 (16:9) screen. The upper and lower portions are masked. C-FILL (CinemaFill) Stretches a 2.35 image vertically in both directions to fill a 16:9 screen. 5.DEF Press to restore factory-default settings for the current source. 6.ISF DAY Press to recall settings for the current input from the “ISF Day” memory preset. 7.ENTER Press to select a highlighted menu item or confirm a changed setting. 8.MENU Press this button to access the on-screen display (OSD) controls.