Vidicode Call Recorder Isdn Manual

 
 
       Call Recorder ISDN Manual - ©2001 - Vidicode Datacommunicatie BV                   
11 
1.5  Some Terminology   
 
For clarity the following terms are used to refer to the recorder’s controls:  
 
1: LCD or display  The screen that gives the user information 
2: Softkeys    The keys under the display that perform the 
function on the display 
3: Telephone keys  The keys  0 and 1 to 9, * and # 
4: Function keys The keys with their function shown above them as 
a pictogram  

 
                 
                 Call Recorder ISDN Manual - ©2001 - Vidicode Datacommunicatie BV
  12  5: Recording keys  
The keys 
, , , ,  and , similar 
to those on a cassette or video recorder 
 
The following terms are used to describe the recording keys: 
 Record key  
 Rewind key 
 Stop key 
 Play key 
 Fast forward key 
 Special Call Recorder key for selecting the next recording 
 
The following are the function keys: 
 
 Volume control keys 
 Loudspeaker key 
 Call Recorder key 
 Monitor...

 
 
       Call Recorder ISDN Manual - ©2001 - Vidicode Datacommunicatie BV                   
13 
2  Installing the Call Recorder 
2.1 Unpacking 
 The Call Recorder comes supplied with the following parts: 
• mains supply adapter 
•  1 ISDN cable of 240cm per S0 bus 
•  1 ISDN cable of 60cm per S0 bus 
•  1 T-connecting piece for ISDN cables per S0 bus 
• this manual 
2.2  Connecting the Call Recorder  
The way the Call Recorder is connected depends on the intended use. The  
connections available are...

 
                 
                 Call Recorder ISDN Manual - ©2001 - Vidicode Datacommunicatie BV
  14  2.2.1  Connecting the power supply  
This is done as follows:    
B  Connect the external mains supply adapter to B  
The recorder has been designed to be permanently connected and there is no 
on/off switch. It comes with an internal battery which is provided only to serve the 
power supply to the internal clock.  
2.2.2  Connecting the S0 buses  
The ISDN S0 bus allows for several machines to be...

 
 
       Call Recorder ISDN Manual - ©2001 - Vidicode Datacommunicatie BV                   
15 
If loudspeakers are connected, they tend to be the loudspeakers that PCs come 
equipped with. Such a set will have a stereo connection, and as the signal coming 
from the Call Recorder is mono, the sound will come from only one speaker. This 
can be solved by connecting the loudspeakers in parallel. The optionally available 
loudspeaker set art. 1197 is already connected this way. 
A   Connect audio...

 
                 
                 Call Recorder ISDN Manual - ©2001 - Vidicode Datacommunicatie BV
  16  In this way a very fast connection between a PC and a recorder can be 
established for applications where there is only one PC and one recorder. W hen 
such a fast connection is required but the PC has no Ethernet card but instead 
has a USB port, as is common on notebook PC’s, a USB to Ethernet adapter can 
bridge the gap and offer a cost efficient high speed connection. 
The cable for this...

 
 
       Call Recorder ISDN Manual - ©2001 - Vidicode Datacommunicatie BV                   
17 
This means that the clock has not been configured yet, and should first be set to 
the right date and time. How to do this is explained in the next chapter, which 
covers configuring the Call Recorder. 
  

 
                 
                 Call Recorder ISDN Manual - ©2001 - Vidicode Datacommunicatie BV
  18    

 
 
       Call Recorder ISDN Manual - ©2001 - Vidicode Datacommunicatie BV                   
19 
3  Configuring the Call Recorder 
A newly installed recorder will record all telephone calls of the S0 buses to which 
it is connected without any further adjustment. W ith the help of a number of 
installation questions, however, it is possible to adjust the recorder even closer to 
the wishes of the user. 
The installation menu can be reached by pressing the configuration key 
  
Access to the recorder...

 
                 
                 Call Recorder ISDN Manual - ©2001 - Vidicode Datacommunicatie BV
  20 
3.2 Playback Volume 
Volume: 10NEXT CHANGE STOP 
This option sets the preferred playback volume either of the internal loudspeaker 
or of the loudspeaker connected to the loudspeaker port (LS).   
By repeatedly pressing the CHANGE key the volume that is set when playing 
starts can be adjusted from the value 0 to 15. When playing the recording the 
volume can be temporarily adjusted even further...