Uniden Oceanus Dsc Vhf Marine Radio Owners Manual

							38
1. Press SELECTat the code that you
want to edit.
2.
EDITappears, then press SELECT.
3. You can now edit the FIPS code. Press
CHincrease the number, CHto
decrease. The number will be entered
when 
SELECTis pressed, and the
blinking digit moves to the right.
2-C-2. EDIT
If you want to edit the FIPS code
1. Press SELECTat NEW. The registering
screen appears.
2. You can now enter the new FIPS code.
Press 
CHto increase the number,
CHto decrease. The number will be
entered when 
SELECTis pressed, and
the blinking digit moves to the right.
When you finish entering the last digit,
the radio returns to 
NEWscreen.
2-C-1. NEW
If you want to register a new FIPS code 
						

							39
4. When you finished editing the last digit,
the confirmation screen appears.
2-C-3. DELETE
If you want to delete a directory entry
1. Press SELECTat the code that you
want to delete.
2. Press 
CHonce. DELETEappears,
then press 
SELECT.
3. The radio displays the next code. 
If no more code remains, 
EXIT
appears. 
						

							40
2-D. AUTO CHANNEL SWITCH 
This feature is to allow you to disable the automatic channel change that
happens when receiving a DSC call.  This feature is useful when
engaged in bridge – to – bridge or other safety related calls.  When you
have completed these calls, all of the incoming DSC calls received are
available in the call log.
1. Press 
SELECTat SETUP(To enter
SETUP, see page 30).
2. Display 
AUTO  CH  SWusing CH
and .
3. Press 
SELECTto enter the setting
mode.
4. If you want to change this mode to off,
press 
CHonce. (Default is set as ON.)
5. Press 
SELECT. The radio returns to the
AUTO  CH  SWscreen. 
						

							41
2-E. POSITION REPLY
When the calling radio has requested the position information of your
radio, you can decide to transmit an acknowledgment automatically or
on a call by call basis.
1. Press 
SELECTat SETUP(To enter
SETUP, see page 30).
2. Display 
POS  REPLYusing CH
and .
3. Press 
SELECTto enter the setting
mode.
4. Press 
CHor to make your
selection. 
						

							42
Example:On
When the radio receives a position
request, the following screen appears.
Example:OF
When the radio receives a position
request, the following screen appears.
You can select whether reply the request
or not. If you wants to reply press
SELECT.
5. Press 
SELECT. The radio returns to the
POS  REPLYscreen. 
						

							43
2-F. CH TAG
This feature allows you to name each marine channel.
1. Press 
SELECTat SETUP(To enter
SETUP, see page 30).
2. Display 
CH  TAGusing CH
and .
3. Press 
SELECT. The channels and its
names appear.
4. Press 
CHand repeatedly to select
the channel that you would like to EDIT
or DELETE.
Note:The OCEANUS DSCradio comes pre-programmed with
default channel names. 
						

							44
3. Press and hold SELECTwhen you enter
the last digit. 1. Press 
SELECTat the individual channel
you want to edit.
2. You can edit the name. Press 
CHor
to select the alphabet, numeric, or
symbols. The character will be entered
when 
SELECTis pressed, and the
blinking digit moves to the right.
2-F-1. EDIT
If you want to edit the channel name 
						

							45
2-G. WHAM(Wireless Handheld Access Microphone)
This feature, from the setup menu, will allow you to connect the 
WHAM.
Note:When you use the WHAMin addition to the OCEANUS DSC
wired mic, please set the BASE ID for the WHAMthe same as
your 
OCEANUS DSC. (Please refer to the Owner’s Manual for
the 
WHAM).
1. Press SELECTat SETUP(To enter
SETUP, see page 30).
2. Display 
WHAMusing CH
and .
3. Press 
SELECT. BASE  IDappears. 
						

							46
1. Press SELECTat BASE  ID, the
following screen appears.
2. Press 
CHto increase the number, CH
to decrease. The number will be
entered when 
SELECTis pressed, and
the blinking digit moves to the right. (You
can select the number 0000 to 9999.)
3. Press and hold 
SELECTto enter the
last digit. The radio returns to the 
BASE
ID
screen.
2-G-1. BASE ID
This number consist of 4 digits that you decide yourself. This feature
allows you to set the Base ID. To use the 
WHAM, you must set the
same Base ID for your 
OCEANUS DSCand WHAM, which enables
your 
OCEANUS DSCand WHAM to communicate with one another. 
						

							47
1. Press CHonce at BASE  ID. 
LINK  CHappears.
2. Press 
SELECTto enter the editing
mode.
3. Press 
CHto increase the number, CH
to decrease. The number will be
entered when 
SELECTis pressed.
4. The radio returns to the 
LINK  CH
screen.
Note:You can select the channel 01-20.
2-G-2. LINK CH
This feature allows you to change the channel between your OCEANUS
DSC
and the WHAMif you encounter interference.