Uniden Oceanus Dsc Vhf Marine Radio Owners Manual

28
2. Press CHrepeatedly to select 
CALL  WAIT.
3. Press 
SELECT. The CALL WAIT
directory appears.
4. Select the options you want to view
using 
CHand . 1. Press 
SELECTat DSC  CALL(To enter
DSC  CALL, see page 21).
INDIVIDUALappears.
1-G. CALL WAIT
The DSC Call Waiting directory records 10 received distress calls, and
records 20 individual calls that are received and not answered within 5
minutes or while the radio is set to DSC Standby.  Calls will be recorded
while you are busy with other...

29
5. Press SELECT.
6. If a DISTRESS call is received in Call
Wait, the following display appears.
If an INDIVIDUAL call is received in Call
Wait, the following display appears.  At
this point, you can call back any of the
radios in the log.
7. Press 
SELECT. Received data appears.
8. Using CH 
and allows you to look
through all of the data. If you press
SELECT, the radio starts transmitting.
Geographical Call
This function can receive the electric wave transmitted towards the ship
that is present in...

1. Press and hold H/L/MENUfor 2 seconds
to enter Menu Operation.
2. Press 
CHonce to display SETUP,
and press 
SELECT.
SETUPhas 9 options as follows. To exit, select EXIT.
2-A-1. ALARM SET
This feature allows you to set the alarm.
1. Press 
SELECTat SETUP. 
ALARM  CLOCKappears.
2. Press 
SELECT.
3. Press 
CHor to select On.
Then, press and hold 
SELECT.
4. Select the hour using 
CHand ,
then press 
SELECT.
5. Select the minute using 
CHand ,
then press 
SELECT.
30
2. SETUP
2-A. ALARM CLOCK
This...

6. Select AM or PM using CHor , then
press 
SELECT.
7. A confirmation screen appears.
31
2-A-2. ALARM ON
This feature allows you to turn the alarm ON.
1. Press 
SELECTat SETUP(To enter
SETUP, see page 30).
2.
ALARM  CLOCKappears. Then, press
SELECT.
3. Press 
SELECTagain.
4. Select 
On. Using CHor , and press
SELECT. The radio returns to the
channel display screen and the  icon
appears.
5. When the radio reaches the set time the
alarm sounds and the  icon blinks.
Note:The alarm sounds when the set...

32
2-A-3. ALARM OFF
This feature allows you to turn the alarm OFF.
1. Press 
SELECTat SETUP(To enter
SETUP, see page 30).
2.
ALARM  CLOCKappears.
3. Press 
SELECT.
4. Select 
OFusing CHor , then press
SELECT.
5. Press 
SELECT. The radio returns to the
channel display screen and the  icon
disappears. 

33
2-B. DIRECTORY
This function will allow you to send an individual call, etc.  The Directory
function memorizes the name and MMSI number of 20 other vessels.
The following screen will allow you to setup an alphanumeric identity as
well as the corresponding MMSI number.
1. Press 
SELECTat SETUP(To enter
SETUP, see page 30).
2. Display 
DIRECTORYusing CH
and .
3. Press 
SELECT. The DIRECTORY menu
appears. Use 
CHand to select the
menu. 

34
2-B-1. NEW
This function will allow you to enter new information into the
directory.
1. Press SELECTat NEW. The registering
screen appears.
2. You can now enter the person’s name.
Press 
CHrepeatedly to choose the
alphabet. The character will be entered
when 
SELECTis pressed, and the
blinking digit moves to the right.
3. After you enter the person’s name, you
can enter their MMSI number. Press 
CH
to increase the number, CHto
decrease. The number will be entered
when 
SELECTis pressed, and the...

35
1. Press SELECTat the individual you
want to edit.
2.
EDITappears, then press SELECT.
3. You can now edit the person’s name.
Press 
CHrepeatedly, and press
SELECTto choose the alphabet. See
the step 2 of 3-E-1 for detail.
4. After you edit the person’s name, you
can edit the MMSI. Press 
CHto
increase the number, 
CHto decrease.
The number will be entered when
SELECTis pressed, and the blinking
digit moves to the right.
5. After the directory data is edited, the
individual appears.
2-B-2. EDIT
If...

36
2-B-3. DELETE
If you want to delete the directory
1. Press SELECTat the individual you
want to delete.
2. Press 
CHonce. DELETEappears,
then press 
SELECT.
3. The radio displays the next individual. 
If no more code remains, 
EXIT
appears. 

37
2-C. FIPS
The 6-digit Federal Information Processing System (FIPS) code
established by the National Weather Service (NWS) identifies
geographic areas in the United States.  Programming FIPS codes are
necessary to receive SAME alerts about weather occurring in a
particular area.  To obtain the FIPS code for a particular area contact the
NWS toll free at 1-888-NWR-SAME (1-888-697-7263).  
Or visit their website: http://www.nws.noaa.gov/nwr/indexnw.htm.  
A list of event codes are located on page 58.
To...