Uniden Mystic Vhf Marine Radio With Gps Owners Manual

9
Mounting the Drop-in Charger
1. You can mount the drop-in charger on either a horizontal or 
vertical surface.
To mount the charger on a horizontal 
surface:
Attach the drop-in charger using the 
mounting screws and washers as 
shown.
To mount the charger on a vertical 
surface:
Insert the two mounting screws into the 
wall keeping the same space as the 
holes on the charger.
Place the charger with the screws 
through the larger opening of the 
mounting holes. Adjust the charger so 
the screw heads are...

10 2. Plug one end of the AC adapter into the 
wall outlet and the other end into the 
drop-in charger.
When you mount the drop-in charger 
on your boat, use the DC adapter 
instead.
Attaching the Antenna
Attach the antenna to the MYSTIC.
Be sure the antenna is firmly seated.
Mystic OM.book  Page 10  Wednesday, October 22, 2003  8:59 PM 

11
Attaching the Battery Pack
1. Place the battery pack onto the back of the radio. It will only fit in one way.
2. Snap the battery release clip until it  clicks. Be sure the battery pack fits 
tightly against the  MYSTIC’s body.
Attaching the Belt Clip
1. Hold the belt clip in the direction 
shown.
2.  Place it firmly on  the mounting button 
on the back of the radio, and slide it 
down and turn until it clicks.
Mystic OM.book  Page 11  Wednesday, October 22, 2003  8:59 PM 

12 3. To remove the belt clip from the radio, 
turn it and slide it off.
Charging the Battery Pack
Yo u r  MYSTIC is powered by a specially-designed Lithium Ion battery 
pack. See page 5 for the Lithium Ion Warning.
Note:Before operating your MYSTIC, charge the battery pack for 4 
hours without interruption in the charging cradle.
1. Be sure the AC adapter (or DC adapter) is connected to the 
charging cradle and the appropriate power source.
2. Place the MYSTIC in the charging 
cradle.
Mystic OM.book...

13 3. The red LED will illuminate and stay on 
until charging is completed.
Warning! Do not transmit while the MYSTIC is in the charging 
cradle.
zWhen charging is completed, the red LED will extinguish. You may 
leave the MYSTIC in the charging cradle without overcharging the 
battery pack.
zYou can monitor incoming calls while the MYSTIC is in the 
charging cradle.
Warning! Do not attempt to replace the battery with the unit on. This 
may damage the memory system of your radio. Be sure to 
turn the...

14 Congratulations on your purchase of the MYSTIC full VHF/GPS Mapping 
Marine Radio. The MYSTIC is designed with exacting standards to 
provide reliability, long life, and outstanding performance.
Note:The graphics in this Operating Guide are intended for illustration 
purposes. They may appear different from the actual screens on 
your MYSTIC.
Features
The included MapSend™ Streets and Destinations USA software 
enhances the utility of your MYSTIC radio with greater mapping detail and 
useful...

15
Location of Controls
For a detailed description of the controls, keys, and display, see 
pages 6 through 8. 
Power On/Off
Before turning the radio on, rotate the SQ (Squelch)  control completely 
counter-clockwise. Then, turn  the radio On by rotating the VOL (ON/Off/
Volume)  control clockwise. Adjust the  volume to a comfortable level.
To turn the radio Off, rotate  VOL counterclockwise until it clicks.
Welcome Screen
When you turn the unit On, you will hear a 
beep and the  Welcome screen appears...

16
A. Marine Only
If you have set the MYSTIC for MRN 
Only
 operation, you will see this 
screen. You will be able to use the 
MYSTIC only as a marine VHF radio. 
You will not have the use of the GPS 
functions.
B. Map Screen
If the MYSTIC is set for GPS Only, 
and you press [ENTER] while the 
Warning message is displayed, the 
display changes to the Map Screen. 
W. Gladstone St.
348O
M25.4M
I
Mystic OM.book  Page 16  Wednesday, October 22, 2003  8:59 PM 

17
C. VHF Screen
If the MYSTIC is set for MRN & GPS, 
and you press [ENTER], the display 
changes to the VHF Screen. The radio 
will be tuned to the Channel you were 
on when you last turned the radio Off.
D. No GPS Screen
If you don’t press [ENTER] at the 
Warning Screen within the 10 sec-
onds, you will not have GPS available.
If you now press [ESC], the MYSTIC 
will return to the Warning screen. You 
will have another 10 seconds to press 
[ENTER] to agree to the message. 
Squelch
The SQUELCH (SQ)...

18
To set the Squelch level:
1. Turn  SQ fully clockwise. This raises the 
“Squelch Gate” so high that only very strong 
signals can get through.
2. Turn  SQ fully counterclock wise until you hear 
a hiss. This lowers the  “Squelch Gate” so that 
everything gets through - noise, weak signals, 
and strong signals.
3. Turn  SQ back clockwise just until the hiss 
stops. Now the “Squelch Gate” allows only 
signals of the desired strength through.
To listen to a weak or di stant station, turn the 
knob...