Uniden Bc92xlt Radio Scanner Owners Manual

31
About Your Scanner
HOLD - appears during scan hold mode and search 
hold mode.
L/O - appears when you manually select a channel 
you locked out or a skip frequency.
DLY - appears when you select a delay.
PRI - appears when the priority feature is turned on.
HAM, WX, POL, FIRE, AIR, or MRN - appears along 
with an indicator that shows the current service bank 
during a service search.
ALT - appears when you receive a Close Call alert 
while the Close Call function is on.
BC92XLT Paper OM.fm  Page 31...

32
About Your Scanner
Understanding Banks
Service Banks
The scanner is preprogrammed with all the 
frequencies allocated to the weather, ham, marine, 
aircraft, police, and fire services.
Channel-Storage Banks
To make it easier to identify and select the channels 
you want to listen to, the 200 channels are divided 
into 10 channel-storage banks. Each bank has 20 
channels. Use each channel-storage bank to group 
frequencies, such as those for the police 
department, fire department, ambulance services,...

33
Operation
Operation
Turning On The Scanner and 
Setting Squelch
Note: Make sure the scanners antenna is 
connected before you turn it on.
1. Turn Squelch fully counterclockwise.
2. Press and hold   for about 2 seconds to turn 
the scanner on, then turn Vo l u m e clockwise until 
you hear a hissing sound.
3. If the scanner is scanning, press Hold to stop 
scanning, then turn Squelch clockwise until the 
hissing stops.
Storing Known Frequencies 
Into Channels
1. Press Hold. Then enter the channel...

34
Operation
2 seconds after the end of a transmission before 
scanning proceeds to the next channel. To turn 
the function off or on, press Func + Dly.
• If you enter a frequency that has already been 
entered elsewhere, the scanner sounds an error 
tone and displays the channel that was 
duplicated. If you entered the frequency by mis-
take, press   then enter the correct frequency. 
To enter the frequency anyway, press E to 
accept.
4. To program the next channel in sequence, press 
E then repeat...

35
Operation
press Func +   or Func +   to step through the 
frequencies.
To release the hold and continue searching, press 
Hold. Or, if you did not press Hold, simply press 
Func +   or Func +   to continue searching.
Note: Because there are many different frequencies 
allocated to fire and police departments, it can take 
several minutes to search all the service frequencies.
Storing Frequencies into Channels 
During Service Search
You can store frequencies you found during service 
search or service...

36
Operation
transmission, it stops on it. When the transmission 
ends, the scanner resumes scanning.
Notes:
• If you have not stored frequencies into any 
channels, the scanner does not scan.
• If the scanner picks up unwanted partial, or very 
weak transmissions, turn Squelch clockwise to 
decrease the scanners sensitivity to these 
signals. To listen to a weak or distant station, 
turn Squelch counterclockwise.
• To ensure proper scanning, adjust Squelch until 
the audio mutes.
Manually Selecting a...

37
Special Features
Special Features
Close CallTM RF Capture Technology
Your scanners Close Call feature lets you set the 
scanner so it detects then displays the frequency of 
a nearby strong radio transmission. Close Call RF 
capture works great for finding frequencies at 
venues such as malls and sporting events. You can 
set the scanner so Close Call detection works in the 
background while you are scanning other 
frequencies, turn off normal scanning while Close 
Call is working, or turn off the...

38
Special Features
• Close Call works better with some types of 
transmissions than others. It might not correctly 
display frequency information for transmitters 
using a highly directive antenna (such as an 
amateur radio beam antenna), if there are many 
transmitters operating at the same time in the 
same area, or if the transmitter is a broadcast 
television station.
Setting the Close Call Options
1. Press Func then press and hold   for 
2 seconds. One of the following Close Call 
options appears....

39
Special Features
If you selected C-C.Alt, skip to Step 5. If you 
selected C-C.PS, skip to Step 7.
3. Repeatedly press   or   until the band you 
want to search appears, then press E to select it. 
Otherwise, press   if you do not want to select it.
The scanner displays the following options.
Lo On or Lo OFF:  Lets you select the 
VHF Lo frequency band.
Air On or Air OFF:  Lets you select the 
Air frequency band.
Hi On or Hi OFF:  Lets you select the 
VHF Hi frequency band.
UHF On or UHF OFF:  Lets...

40
Special Features
6. Repeatedly press   or   until the option you want 
appears, then press E to select it. Otherwise, press 
 if you do not want to select it. Then skip to Step 9.
7. Press E while C-C.PS appears. One of the
following Pager Screen options appears.
PS On: The scanner ignores hits on common 
pager frequencies.
PS OFF: The scanner alerts you when it receives 
hits on common pager frequencies.
8. Repeatedly press   or   until the option you 
want appears, then press E to select it.
9. When...