Home > Uniden > Communications receiver > Uniden Bc60xlt 1 Vhf Uhf Scanner Owners Manual

Uniden Bc60xlt 1 Vhf Uhf Scanner Owners Manual

    Download as PDF Print this page Share this page

    Have a look at the manual Uniden Bc60xlt 1 Vhf Uhf Scanner Owners Manual online for free. It’s possible to download the document as PDF or print. UserManuals.tech offer 50 Uniden manuals and user’s guides for free. Share the user manual or guide on Facebook, Twitter or Google+.

    							Care and Maintenance
    General Use
    Turn the scanner off before disconnecting the
    power or replacing the batteries.
    Always write down the programmed frequencies in
    the event of memory loss.
    If memory is lost, simply reprogram each channel.
    The display shows
    000.0000in all channels when
    there has been a memory loss.
    Always press each button firmly until you hear the
    entry tone for that key entry.
    Location
    Do not use the scanner in high-moisture
    environments such as the kitchen or bathroom.
    Avoid placing the unit in direct sunlight or near
    heating elements or vents.
    If the scanner receives strong interference or
    electrical noise, move it or its antenna away from
    the source of the noise. If possible, a higher
    elevation, may provide better reception. Also try
    changing the height or angle of the antenna.
    Do not plug the scanner into an outlet controlled by
    a wall switch because long power interruptions
    may cause memory loss.
    Cleaning
    Disconnect the power to the unit before cleaning.
    Clean the outside of the scanner with a mild
    detergent. To prevent scratches,do notuse
    abrasive cleaners or solvents. Be careful not to rub
    the LCD window.
    Do not use excessive amounts of water.
    31 
    						
    							Repairs
    Do not attempt any repair. The scanner contains
    no serviceable parts. Contact the Uniden
    Customer Service Center or take it to a qualified
    repair technician.
    Birdies
    All radios can receive “birdies” (undesired signals).
    If your scanner stops during Scan mode and no
    sound is heard, it may be receiving a birdie. Birdies
    are internally generated signals inherent in the
    electronics of the receiver.
    Press
    Lto lockout the channel,and then press
    Sto resume scanning.
    32 
    						
    							Troubleshooting
    If yourBC60XLT-1is not performing properly, try the
    following steps.
    Problem Suggestion
    Scanner won’t work. 1. Check the connections at both ends of
    the AC Adapter.
    2. Turn on the wall switch of your room. You
    could be using an outlet controlled by the
    wall switch.
    3. Move the AC Adapter to another wall
    outlet or replace the batteries.
    Improper reception. 1. Check the antenna connection or move
    and reposition the antenna.
    2. Move the scanner.
    3. You may be in a remote area which could
    require an optional multi-band antenna.
    Check with your dealer or local
    electronics store.
    Scan won’t stop. 1. Adjust squelch threshold - refer to
    page 10,
    Setting the Squelch.
    2. Check the antenna connection.
    3. Check to see if many of the channels are
    locked out. If so, the scanner has less
    chance of finding an active channel.
    4. Review each channel’s frequency to see
    if it is still stored in memory and is correct.
    5. It’s possible that none of the programmed
    frequencies are currently active.
    Scan won’t start. 1. Press the
    Skey again.
    2. Adjust the
    SQUELCHcontrol.
    3. Check to see if all channels are locked
    out.
    Weather Scan won’t work. 1. Adjust squelch threshold - refer to
    page 10,
    Setting the Squelch.
    2. Check the antenna.
    If you still cannot get satisfactory results and want
    additional information, or to return the unit for service,
    please call or write the Uniden Parts and Service Division.
    The address and phone number are listed in the Warranty
    at the end of this manual, or call 1-800-297-1023.
    33 
    						
    							Specifications
    Certified in accordance with FCC Rules and Regulations
    Part 15, Subpart C, as of date of manufacture.
    Channels:30 (1 Bank)
    WX:7 NOAA Weather Service Channels
    Search Bands:10 Preprogrammed Bands
    5 Programmable Chain Search
    Bands
    Frequency Range:29.0–29.7 MHz 10 Meter Amateur Band
    29.7–50 MHz VHF Low Band
    50–54 MHz 6 Meter Amateur Band
    137–144 MHz Military Land Mobile
    144–148 MHz 2 Meter Amateur Band
    148–174 MHz VHF High Band
    Above bands in 5 kHz steps
    406–420 MHz Federal Government
    420–450 MHz 70 cm Amateur Band
    450–470 MHz UHF Standard Band
    470–512 MHz UHF “T” Band
    Above bands in 12.5 kHz steps
    Operating
    Temperature:–20°C to +60°C
    Scan Rate:10 Channels per second
    Search Rate:10 Steps per second
    Scan Delay:2 seconds
    Audio Output:18 mW nominal into 8Winternal speaker
    3 mW nominal into 32Wstereo headphone
    8 mW nominal into 64Wearphone
    Power
    Requirements:12VDC using AD70U Adapter or
    4AA Alkaline or rechargeable
    Nickel-Cadmium Batteries
    Antenna:Rubber antenna (included)
    External Jacks:External earphone, DC 12V power jack
    Size:2
    1¤2in. (W) x 11¤2in. (D) x 7 in. (H)
    Weight:12 oz.
    Features, Specifications, and availability of optional
    accessories are all subject to change without notice.
    34 
    						
    							Accessories and Replacement
    Parts
    Rubber Antenna
    (AT218)Belt Clip
    with
    Screws
    (BCK150)
    AC Adapter
    (AD70U)
    Monaural Earphone
    64
    (EP009)W
    Cigarette Lighter
    Power Cord
    (UA502)Hard-Wired Power Cord
    (UA510)
    Betty Bearcat
    Starter
    Frequency
    Guide
    35 
    						
    							One Year Limited Warranty
    Important:Evidence of original purchase is required for
    warranty service.
    WARRANTOR:UNIDEN AMERICA CORPORATION (“Uniden”)
    ELEMENTS OF WARRANTY:Uniden warrants, for one year, to
    the original retail owner, this Uniden Product to be free from
    defects in materials and craftsmanship with only the limitations or
    exclusions set out below.
    WARRANTY DURATION:This warranty to the original user shall
    terminate and be of no further effect 12 months after the date of
    original retail sale. The warranty is invalid if the Product is (A)
    damaged or not maintained as reasonable or necessary, (B)
    modified, altered, or used as part of any conversion kits,
    subassemblies, or any configurations not sold by Uniden, (C)
    improperly installed, (D) serviced or repaired by someone other
    than an authorized Uniden service center for a defect or
    malfunction covered by this warranty, (E) used in any conjunction
    with equipment or parts or as part of any system not
    manufactured by Uniden, or (F) installed or programmed by
    anyone other than as detailed by the Operating Guide for this
    product.
    STATEMENT OF REMEDY:In the event that the product does
    not conform to this warranty at any time while this warranty is in
    effect, warrantor will repair the defect and return it to you without
    charge for parts, service, or any other cost (except shipping and
    handling) incurred by warrantor or its representatives in
    connection with the performance of this warranty. THE LIMITED
    WARRANTY SET FORTH ABOVE IS THE SOLE AND ENTIRE
    WARRANTY PERTAINING TO THE PRODUCT AND IS IN LIEU
    OF AND EXCLUDES ALL OTHER WARRANTIES OF ANY
    NATURE WHATSOEVER, WHETHER EXPRESS, IMPLIED OR
    ARISING BY OPERATION OF LAW, INCLUDING, BUT NOT
    LIMITED TO ANY IMPLIED WARRANTIES OF
    MERCHANTABILITY OR FITNESS FOR A PARTICULAR
    PURPOSE. THIS WARRANTY DOES NOT COVER OR
    PROVIDE FOR THE REIMBURSEMENT OR PAYMENT OF
    INCIDENTAL OR CONSEQUENTIAL DAMAGES. Some states
    do not allow this exclusion or limitation of incidental or
    consequential damages so the above limitation or exclusion may
    not apply to you.
    LEGAL REMEDIES:This warranty gives you specific legal rights,
    and you may also have other rights which vary from state to
    state. This warranty is void outside the United States of America.
    PROCEDURE FOR OBTAINING PERFORMANCE OF
    WARRANTY: If, after following the instructions in this Operating
    Guide you are certain that the Product is defective, pack the
    Product carefully (preferably in its original packaging). Include
    evidence of original purchase and a note describing the defect
    that has caused you to return it. The Product should be shipped
    freight prepaid, by traceable means, or delivered, to warrantor at:
    Uniden America Corporation
    Parts and Service Division
    4700 Amon Carter Boulevard
    Fort Worth, TX 76155
    (800) 297-1023, 8:00 a.m. to 5:00 p.m., Central, Monday
    through Friday
    36 
    						
    							Covered under one or more of the following U.S. patents:
    RE31,523 4,027,251 4,057,760 4,092,594 4,100,497
    4,114,103 4,123,715 4,156,193 4,157,505 4,179,662
    4,219,821 4,270,217 4,398,304 4,409,688 4,455,679
    4,461,036 4,521,915 4,627,100 4,888,815 4,932,074
    4,947,456 5,014,348 5,199,109
    ©1995 Uniden America Corporation. All rights reserved.
    Printed in the Philippines 
    						
    All Uniden manuals Comments (0)

    Related Manuals for Uniden Bc60xlt 1 Vhf Uhf Scanner Owners Manual