TomTom 1535tm User Manual

41 
 
 
 
About Map Share 
Map Share helps you correct map errors. You can correct several types of map error. 
To make corrections to your own map, tap Map corrections in the Settings menu. 
Note: Map Share is not available in all regions. For more information, go to 
tomtom.com/mapshare. 
 
Correcting a map error 
Important: For safety reasons, do not enter the full details of a map correction while you are 
driving. Mark the location of the map error instead and enter the full details later. 
To...

42 
 
 
 
tion or a street on the map. 
3. Select the street or section of a street you want to correct by tapping 
it on the map. 
The street you select is highlighted and the cursor shows the name 
of the street. 
4. Tap Done. 
Your device shows the street and whether the traffic is blocked or 
allowed in each direction. 
 
5. Tap one of the direction buttons to block or unblock the flow of traffic 
in that direction. 
6. Tap Done. 
 
Reverse traffic 
direction  
Tap this button to correct the traffic...

43 
 
 
 
 
Change turn 
restrictions  
Tap this button to change and report incorrect road turn restrictions. 
 
Change road speed  
Tap this button to change and report the road speed limit. 
 
Add or remove 
rotary  
Tap this button to add or remove a rotary. 
 
Add missing POI  
Tap this button to add a new Point of Interest (POI). 
For example to add a new restaurant near to your current location: 
1. Tap Add missing POI. 
2. Tap Restaurant in the list of POI categories. 
3. Tap Near you. 
You can...

44 
 
 
 
 
Correct house 
number  
Tap this button to correct the location of a house number. Enter the 
address that you wish to correct and then indicate on the map the correct 
location of that house number. 
 
Existing street  
Tap this button to edit an existing street. Once you have selected the 
street, you can select an error to report. You can select more than one 
type of error for a street. 
 
Missing street  
Tap this button to report a missing street. You have to select the start 
and end...

45 
 
 
 
About sounds and voices 
Your TomTom device uses sound for some or all of the following: 
 Driving directions and other route instructions 
 Traffic information 
Note: To use a TomTom traffic information service, you may need a subscription or a re-
ceiver. Traffic services are not supported in all countries or regions. For more information, 
visit tomtom.com/services. 
 Warnings that you set 
 Hands-free phone calls 
There are two types of voice available for your device: 
 Voices that...

46 
 
 
 
Tap    in the Main menu, then tap Volume settings and move the slider to adjust the volume. 
Tap Test to listen to the new volume level.  
Automatic volume control 
To set your TomTom device to automatically adjust the volume, do the following: 
1. Tap Settings in the Main menu. 
2. Tap Volume. 
3. Select Link volume to car speed to automatically adjust the volume inside the car in response 
to changes in the speed of your driving. 
4. Tap Done.  

47 
 
 
 
About Settings 
You can change the way your TomTom device looks and behaves. Most of the settings on your 
device can be accessed by tapping Settings in the Main menu. 
Note: Not all settings described here are available on all devices. 
 
2D/3D settings 
 
2D/3D settings 
 
 
Tap this button to set the default view of the map. To switch between 2D 
and 3D views while driving, tap the left side of the status bar in the 
Driving View. 
It is sometimes easier to view the map from above, such as...

48 
 
 
 
 Enable automatic zooming in 3D view - when this setting is selected, 
you see a wider view when you are on highways and major roads. 
You then zoom in automatically as you approach junctions. 
Show lane images - when this setting is selected, a graphical view of 
the road ahead shows which lane you need when you approach a 
junction or highway exit. You can choose to see a split-screen lane 
image, a full-screen lane image or you can switch off lane images al-
together. This feature is not...

49 
 
 
 
Enable / Disable Bluetooth 
 
Enable Bluetooth  
Tap this button to enable Bluetooth®. 
Note: This feature is not available on all TomTom navigation devices.  
 
Disable Bluetooth  
Tap this button to disable Bluetooth®. 
Note: This feature is not available on all TomTom navigation devices.  
 
Enable / Disable flight mode 
 
Enable / Disable 
flight mode 
 
 
Tap this button to enable or disable flight mode. Flight mode stops all 
communication from the device. 
 
Favorites 
 
Favorites...

50 
 
 
 
 
 
GPS status 
 
GPS status 
 
 
Tap this button to see the current status of GPS reception on your 
device. 
 
Home location 
 
Home location 
 
 
Tap this button to set or change your Home location. You enter the 
address in the same way as you do when you plan a route. 
Your Home location provides an easy way to plan a route to an important 
location. 
For most people, your Home location will be your home address. How-
ever, you might prefer to set the location to another regular...