Troy-Bilt 675 Hp Manual

21
Notes   

22
ProblemCauseRemedy
Engine Fails to start1. Blade control disengaged.
2. Spark plug boot disconnected.
3.  Fuel tank empty or stale fuel.
4. Engine not primed (if equipped with primer). 
5. Faulty spark plug.
6. Blocked fuel line.
7. Engine flooded. 
8. Fuel valve (if equipped) closed.
9.  Engine not choked (if equipped with choke).
1. Engage blade control.
2. Connect wire to spark boot.
3.  Fill tank with clean, fresh gasoline.
4. Prime engine as instructed in the Operation 
section.
5. Clean, adjust...

23
ProblemCauseRemedy
Idles poorly1. Spark plug fouled, faulty, or gap too wide.
2. Dirty air cleaner.
1. Reset gap to .030” or replace spark plug.
2. Refer to engine manual.
Excessive Vibration1. Cutting blade loose or unbalanced.
2. Bent cutting blade.
1. Tighten blade and adapter. Balance blade.
2. See an authorized service dealer.
Mower will not
mulch grass
1. Wet grass. 
2. Excessively high grass. 
 
3.  Dull blade.
1. Do not mow when grass is wet; wait until 
later to cut.
2. Mow once at a high...

24
ComponentPart Number and Description
BS-594056 Spark Plug (Briggs & Stratton -  exi
                                  Models)
98079-55846 Spark Plug (Honda)
BS-591868  Spark Plug (Briggs & Stratton - 
                                  Quantum Models)
951-14437 Spark Plug (MTD)
  
BS -29 8 0 9 0S† Fuel Filter (Briggs & Stratton)
951-10358A            Fuel Filter (MTD)
16952-Z8B-000  Fuel Filter (Honda)
BS-491588S Air Filter Cartridge (Briggs & Stratton - 
                                  Quantum...

25
ComponentPart Number and Description
731-07131  Discharge Chute
942-0741A              Mulching Blade
942-0741-X             Xtreme Mulching Blade
964-04117B          Grass Bag
954 - 04260             Belt
7 2 5 - 0 6121A† Battery Charger
725-04903†           Battery
731- 0 9728†            Push Key
Phone (800) 828-5500 or (330) 558-7220 to order replacement parts or a complete Parts Manual (have your full model number and 
serial number ready). Parts Manual downloads are also available free of charge...

26
ComponentModel Number and Description
490-850-0005      Blade Removal Tool —
 Holds blade in place for faster, safer 
removal.
SPW-134 Spark Plug Wrench —
 Duel ended wrench to serve multiple 
uses. Fits ¾” or 13⁄16” hex plug.   
    
490-850-0008 Oil Siphon —
 Makes it easy to transfer gas, oil and 
liquids from tank to container.
490-850-0016 Side Discharge Blower —
 Blows leaves, grass clippings and 
debris. Eliminates need for separate 
blower. Easy installation with no tools.
490-850-0015 Cargo...

27
ComponentModel Number and Description
22216 STA-BIL® fuel Stabilizer,  32 oz —
 Treats 80 gallons of fuel. Keeps stored 
fuel fresh for quick, easy starts. 
Prevents corrosion from moisture and 
ethanol-induced attraction. Prevents 
gum and varnish.
490-290-0012 Mower Cover —
 Protects your mower against sun, rain 
and dust damage. Coated for maximum 
water resistance and repellency. U.V. 
and milddew resistant
490-900-0062 Non-Stick Mower Deck Spray —
 Long-Lasting anti-stick graphite spray....

MANUFACTURER’S LIMITED WARRANTY FOR
GDOC-100020 REV. A
The limited warranty set forth below is given by Troy-Bilt LLC with 
respect to new merchandise purchased and used in the United States 
and/or its territories and possessions, and by MTD Products Limited 
with respect to new merchandise purchased and used in Canada and/
or its territories and possessions (either entity respectively, “Troy-Bilt”).
This warranty is in addition to any applicable emissions warranty 
provided with your product....

Impreso en Estados Unidos de América
MaN ual del operador
Medidas importantes de seguridad • Configuración • Funcionamiento •  Mantenimiento • Servicio •  
Solución de problemas •  Garantía
 ADVERTENCIA
LEA Y SIGA TODAS LAS INSTRUCCIONES DE ESTE MANUAL ANTES DE PONER EN 
FUNCIONAMIENTO ESTA MÁQUINA. 
SI NO RESPETA ESTAS INSTRUCCIONES PUEDE PROVOCAR LESIONES PERSONALES.
Formulario No. 769-10198
(Octubre 16, 2014)
Podadora tipo abonadora autopropulsada — Modelos TB 220,  
TB 230, TB 240, y TB 280 ES...

2
Gracias por comprar una máquina quitanieve fabricada por Troy-Bilt.  La misma ha sido diseñada cuidadosamente para brindar excelente rendimiento si se la opera y mantiene correctamente. 
Por favor lea todo este manual antes de operar el equipo.  Le indica cómo configurar, operar y mantener la máquina con seguridad y fácilmente.  Por favor asegúrese de seguir cuidadosamente y en todo momento las prácticas de seguridad recomendadas, y hacérselas seguir a cualquier otra persona que opere la máquina.  En...