Home > Tripp Lite > Switch > Tripp Lite 8 Port Kvm Manual

Tripp Lite 8 Port Kvm Manual

Here you can view all the pages of manual Tripp Lite 8 Port Kvm Manual. The Tripp Lite manuals for Switch are available online for free. You can easily download all the documents as PDF.

Page 11

1111
6. Operation (continued)
6.3 On-Screen Display (OSD) F2 SETTINGS (continued)
6.3.2 Ports
6.3.3 Time
Highlight the Ports option and press the [Enter] key to open the Port Settings page. This page allows you to edit port names, set the remote computer keyboard type, and set the h\
otkey for ports that have second level KVM switches connected to them. The table below describes each of these settings.
ColumnDescription
NAMEThe	first	column	displays	the	name	associated	to	each	port.	You	can	change	this...

Page 12

1212
6. Operation (continued)
6.3 On-Screen Display (OSD) F2 SETTINGS (continued)
6.3.4 Users
6.3.5 Security
The Users option can only be accessed when Security is enabled in the General Settings page. (See General under On-Screen Display OSD F2 Settings section for details.) Highlight the Users option and press the [Enter] key to open the User Settings page. In the column on the left side of the screen, all of the ports on the KVM are listed. On the right side of the screen, there \
are 6 columns; one...

Page 13

13
•	 Firmware	Upgrade	Utility—This	 Windows-based	 application	reads	the	current	 firmware	 and	installs	the new firmware of the KVM and Server Interface Units (SIUs). Note: The firmware upgrade utility is compatible with Windows 32-bit operating systems only.
•	 Firmware	 Upgrade	File—This	 file	contains	 the	actual	 firmware	 for	the	 KVM	 and	SIUs.
7.2 Firmware Upgrade Software Requirements
7.3 Performing a Firmware Upgrade
7.4 Physical Installation
7.5 Current Firmware Verification
7.1 Firmware...

Page 14

1414
7.5 Current Firmware Verification (continued)
3. When installation is complete, clicking the Finish button	will	automatically	open	the	Firmware	Upgrade Utility with the main screen displayed.
4.	 There	are	three	types	of	firmware	to	be	verified;	OSD, Manager and SIU. Start by checking the NetCommander CAT5 KVM Switch OSD box at the top of the utility, and then click the F/W Version button	at	the	bottom	of	the	utility	to	display	the	firmware	version	number.	Check	this	against	the	firmware	you...

Page 15

15
7. Firmware Upgrade (continued)
7.5 Current Firmware Verification (continued)
5. Uncheck the NetCommander CAT5 KVM Switch OSD box, and check the box next to NetCommander CAT5 KVM Switch Manager. Click the F/W Version button at the bottom of the utility to display the firmware	version	number.	Check	this	against	the	firmware	you	obtained	from	the	 Tripp	Lite	website	to	determine if an upgrade is needed.
6. Uncheck the NetCommander CAT5 KVM Switch Manager box, and check the box in the middle of the...

Page 16

16
7. Firmware Upgrade (continued)
7.6 Firmware Upgrade
Once you have determined that your KVM and/or SIU(s) need to be upgrad\
ed, follow the steps below to install	the	new	firmware.
1.	 In	the	Firmware	Upgrade	Utility	main	screen,	open	the Options drop-down menu at the top of the screen and select the Com Port	option.	Select	the	com	port	of	the	upgrade	computer	that	the	Firmware	Upgrade Cable is connected to and click OK.
2. Open the File drop-down menu at the top of the screen and select the Open...

Page 17

17
Warning: Disconnect device from AC mains before service operation!
When	using	Firmware	 Update	software,	 you	may	 get	a	Communication	 Error	message.
If a Communication Error message appears during the update procedure, do\
 the following:
1. Ensure that the RS232 serial cable's RS232 connector is connected to the switch's communication port
2. Ensure	 that	the	RS232	 serial	cable's	 DB9F	connector	 is	connected	 to	the	 DB9M	 serial	port	on	the	CPU's rear panel
3. Restart the...

Page 18

1818
This equipment has been tested and found to comply with the limits for a Class A digital device, pursuant to	Part	 15	of	the	 FCC	 Rules.	 These	limits	are	designed	 to	provide	 reasonable	 protection	against	harmful	interference when the equipment is operated in a commercial environment. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instruction manual, may cause harmful interference to radio communications. Operation of...

Page 19

1919
Visit www.tripplite.com/warranty today to register the warranty for your new Tripp Lite product. You'll be automatically entered	into	a	drawing	 for	a	chance	 to	win	 a	FREE	 Tripp	Lite	product!*	
*	No	 purchase	 necessary.	 Void	where	 prohibited.	 Some	restrictions	 apply.	See	website	 for	details.
WEEE Compliance Information for Tripp Lite Customers and Recyclers (European Union)
Under the Waste Electrical and Electronic Equipment (WEEE) Directive and implemen\
ting regulations, when...

Page 20

Tripp Lite World Headquarters1111 W. 35th Street, Chicago, IL 60609 USAwww.tripplite.com/support
201107078	93-2520-EN
20
201107078 93-2520.indd   208/3/2011   4:38:31 PM 
Start reading Tripp Lite 8 Port Kvm Manual

Related Manuals for Tripp Lite 8 Port Kvm Manual

All Tripp Lite manuals