Tripp Lite 0 Idades Manual
Here you can view all the pages of manual Tripp Lite 0 Idades Manual. The Tripp Lite manuals for Switch are available online for free. You can easily download all the documents as PDF.
Page 171
171 Chapter 10: Nagios Integration define service { service_description Host Ping host_name server use generic-service check_command check_ping_via_tripplite } define service { service_description host-ping-server host_name server use generic-service check_command check_ping_via_tripplite active_checks_enabled 0 passive_checks_enabled 1 } define servicedependency{ name tripplite_nrpe_daemon_dep host_name tripplite dependent_host_name server dependent_service_description...
Page 172
172 Chapter 10: Nagios Integration 10.4.2 Basic Nagios plug-ins Plug-ins are compiled executables or scripts that can be scheduled to be\ run on the Console Server to check the status of a connected host or service. This status is then communicated to the upstr\ eam Nagios server which uses the results to monitor the current status of the distributed network. Each Console Server is pr\ econfigured with a selection of the checks that are part of the Nagios plug-ins package: check_tcp and check_udp...
Page 173
173 Chapter 11: System Management This chapter describes how the Administrator can perform a range of gene\ ral system administration and configuration tasks on the Console Server, such as: • Applying Soft and Hard Resets to the gateway • Re-flashing the firmware • Configuring the Date, Time and NTP • Setting up Backup of the configuration files (B095-004/003 only) • Configuring the console server in FIPS mode(B095-004/003 only) • Delayed configuration commits System administration and configuration...
Page 174
174 Chapter 11: System Management 11.2 Upgrade Firmware Before upgrading you should ascertain if you are already running the mos\ t current firmware in your gateway. Your Console Server will not allow you to upgrade to the same or an earlier version. \ • The Firmware version is displayed in the header of each page • Or select Status: Support Report and note the Firmware Version • To upgrade, you must first download the latest firmware image from...
Page 175
175 Chapter 11: System Management 11.3 Configure Date and Time It is recommended that you set the local Date and Time in the Console Se\ rver as soon as it is configured. Features such as Syslog and NFS logging use the system time for time-stamping log entries\ , while certificate generation depends on a correct Timestamp to check the validity period of the certificate. • Select the System: Date & Time menu option • Manually set the Year, Month, Day, Hour and Minute using the Date and Time selection...
Page 176
176 Chapter 11: System Management 11.4 Configuration Backup It is recommended that you back up the Console Server configuration wh\ enever you make significant changes (such as adding new Users or Managed Devices) or before performing a firmware upgrade\ . • Select the System: Configuration Backup menu option or click the icon Note: The configuration files can also be backed up from the command lin\ e (refer Chapter 14) You can save the backup file remotely on your PC and you can restore co\...
Page 177
177 Chapter 11: System Management After saving a local configuration backup, you may choose to use it as\ the alternate default configuration. When the Console Server is reset to factory defaults, it will then load your alternate de\ fault configuration instead of its factory settings: • To set an alternate default configuration, check Load On Erase and click Apply Note: Before selecting Load On Erase please ensure you have tested your alternate default configuration by\ clicking Restore If for some...
Page 178
178 Chapter 11: System Management • Click Apply to run all the configurators in the queue • Alternately click Cancel and this will discard all the delayd configuration changes Note: All the queued configuration changes will be lost if Cancel is selec\ ted To disable the Delayed Configuration Commits mode: • Uncheck the Delayed Config Commits button under System: Administration and click Apply • Click the Commit Config button in top right-hand corner of the screen to display the System: Commit...
Page 179
179 Chapter 12: Status Reports This chapter describes the dashboard feature and the status reports that\ are available: • Port Access and Active Users • Statistics • Support Reports • Syslog • Dashboard The UPS, RPC and Environmental Status reports are covered in Chapter 8 12.1 Port Access and Active Users The Administrator can see which Users have access privileges with which \ serial ports: • Select the Status: Port Access The Administrator can also see the current status as to Users who have...
Page 180
180 Chapter 12: Status Reports 12.2 Statistics The Statistics report provides a snapshot of the status, current traffi\ c and other activities and operations of your Console Server: • Select the Status: Statistics 12.3 Support Reports The Support Report provides useful status information that will assist t\ he Tripp Lite technical support team to resolve any issues you may experience with your Console Server. If you do experience an issue and have to contact Support, ensure you in\ clude the Support...