Trane Comfort Link 2 Instruction Manual

							       21 
6) Enter the Network Key using the on-screen keypad.5) Press “Enter Network Key” button.
2) Press the “Enter SSID Name” button.1) The “Network Security” button in this Ad-vanced Network Settings menu will be highlighted by default.
4) Select a network security type.*
     *NOTE:   WEP-Shared is not supported.
3) Enter the SSID Name using the on-screen keypad.
When the network’s SSID is not broadcast (hidden), manual configuration in this screen is required.
Network Security7.5 
						

							22  
Host Settings7.6
This screen is used to manage how the control obtains network addresses and is needed when DHCP (Dynamic Host Configuration Protocol) has been turned off or is not available on the router.  Otherwise, you may use DHCP to automatically obtain this information.  This manual configuration is required if a static IP address is desired.
NOTE:  No additional configuration may be required in a non-broadcast network where IP addresses are assigned by DHCP.  You may connect to the network without modifying the Host Settings.
3) Enter the IP address as required for each.
4) To manually select a DNS server, enter IP address(es). 
1) Select the “Host Settings” button to access the second screen of settings in this Ad-vanced Network Settings menu.
2) Select IP Address, Gateway and Subnet Mask buttons as required.
5) After all the addresses are assigned, Con-nect to the network.6) To change a Static IP Address to a DHCP Ad-dress, press “Release and Renew IP Address”. 
						

							       23 
Once a network has been joined, the control will reconnect to it after signal or power interruptions.  When connected, a green dot will be shown.
To disconnect from this network, enter the “Connect to a Network” menu and select “Disconnect”.
NOTE:  When joining a different network, the current router must be discon-nected in this menu before a new one may be selected.  In addition if settings are changed on the owner’s router, the network may need to be disconnected and reconnected in this menu.
Repeat previous steps to connect to a different network.
The Network Properties screen displays the control’s current network informa-tion.
Network Properties
Disconnecting from a Network
7.7
7.8  
						

							24  
Zoned and Multi-System Environments7.9
1) In a multi-system environ-ment each control can see and manage the others.  
 NOTE:  The controls must have wireless enabled and be connected to the same personal wireless network.
2) Each control belongs to an Access Control Group—set to “Group A” by default.  Therefore, if two controls are connected to the same wireless network and have matching Group IDs (shown as Group A to the right), they will be able to communicate with each other.
 Set the controls to the de-sired Group.
4) The Zone Menu is shown at right.  
3) In a multi-system environment where the sys-tems are in the same Group, the “Zones” but-ton will appear in place of the “System” button (see picture at right).  
						

							       25 
6) The Zone Overview menu shows a quick view of each zone’s current condition.
7) System wide settings for all zones can be seen at a glance in the System Status screen.
10) System and Zone Names may be set in the Zone Names screen.  The “Rename System” and “Rename Zone” buttons al-low entering custom names from a keypad.  
 Pre-configured names are also available.
8) A schedule for one zone can be copied to another.
5) In zoned and multi-sys-tem environments, the main screen display will change to indicate the presence of multiple zones.  (Notice the new zone button—labeled “Upstairs”—at right.)  
 Arrow buttons navigate between zone views.
9) Each zone’s schedule can be viewed by cy-cling through the zones using the arrows in the top left corner.   
						

							26  
Wireless Registration8
1A) In the Network Setup Screen, select the “Register Now” button to begin registration.  Proceed to Step 2.
1B) If instead you try to connect to Weather before you have reg-istered, you will be prompted to register.
2) After reading and ac-cepting the License Agreement, enter your email address.
3) An email containing a verification code will automatically be sent to the email address you entered.
Registration is required for Weather, Software Updates and Schlage LiNK integration.  Registration ensures that your control is using the most up-to-date software and will also let you take advantage of exciting new features in the future.  You will be notifed via email when there is a software upgrade available.  For complete privacy information see our Privacy Policy at trane.com. 
						

							       27 
Schlage LiNK Enrollment9
10) After entering your verification code, your additional fea-tures will now be enabled.
11) In the event your email address changes, you can update the email ad-dress with your new one.  The process is similar to first-time registration.
9) Enter the 5-digit veri-fication code.
 NOTE:  This will only need to be done one time.
The control can be managed remotely via an internet connected computer and most smart cell phones via Schlage LiNK. Schlage is a leader in home securiity and also offers digital locks, video cameras and light modules to help manage your home’s safety, comfort and efficiency. Visit www.link.schlage.com to learn more.
1) Visit www.schlagelink.com to sign on and add your new control to your account or click on the “Just purchased a Schlage LiNK System link to set up a new Schlage LiNK account.
2) Follow the online instructions to add your control to your account. 
3) When you add your control to your online account, a verification PIN code is generated.  Enter that PIN code to enroll your control and enjoy the comfort, sav-ings and convenience Schlage LiNK offers.  
						

							28  
Software Upgrades10
Your control is built with the future in mind and has the ability to upgrade its operating system.  Software upgrades ensure your control has the most up-to-date software optimizing its opera-tion and providing exciting new features as they become available.
The Software Upgrades menu is accessed by navigating to Menu --> Settings --> Network.  After pressing the “Software Upgrades” button, follow the guided instructions on the series of screens.  
Upgrade the software by one of the following methods:
1) Select the “Check for updates on the internet” box as shown in the screen at right.  This is the default setting and the easiest way to upgrade your control’s software. 
2) Alternatively, using a web browser and your computer, download the latest sofware upgrade image from the trane.com website and place this computer file on an SD card.  After transfer-ring the SD card from your computer to the control, select “Check for upgrades on SD Card” as shown in the screen at right.
Follow the instructions to upgrade your control.  Additional instructions are found on the trane.com website.
Requirements
•	 You	must	have	a	currently	active	internet	connection.•	 You	must	already	have	registered	your	control	(see	previous	section).•	 You	must	have	an	SD	card	with	adequate	memory	available. 	Data	for	the	upgrade will be stored on this card.  
						

							       29 
Troubleshooting11
Slow response or  
unexpected operation:
Reboot your control at the 
following location.
“No System Found” displays on the screen:
If this message stays on your screen, press the 
“Reboot” button shown at right.
No response to any button presses:
Remove and re-install the control as shown below.  The boot up process may take several minutes.
Re-Install Control Re-install control flat onto sub-base being careful to align unit correctly with the sub-base before applying force. Control should fit snug and not “rock” when properly installed.  
Remove Control Remove control from its sub-base by grasping at edges and gently pulling the control straight towards you. It should release without much effort.   
						

							30  
Index of Functionality
1-Touch Presets ..................................14
Air Cleaner Mode ..................................7
Alerts ..................................................30
Customize Home Screen ....................15
Dealer Information ..............................13
Events .................................................13
Fan Mode..............................................6
Humidity ..............................................15
Multi-System .......................................24
Name System .....................................13
Network ..............................................18
Network Key .......................................19
Photo Album .......................................10
Registration ........................................26
Scheduling ............................................8
Schlage LiNK ......................................27
Screen Saver ......................................12
Security ..............................................14
Software Upgrades .............................28
System Mode ........................................6
System ON/OFF ...................................6
System Runtime History .....................14
Time/Date ...........................................14
Troubleshooting ..................................29
Wireless Networking ...........................16
2) Press “Close” to dismiss the alert.  The error message can be recalled by pressing the Alert icon which will remain in the menu bar.
Dealer Information can also be accessed by this path:
System Alerts
1) When your system indicates an issue with communication or operation, an alert will display on the screen.
 Click the “Dealer Contact Info” to retrieve your dealer’s phone numbers and website informa-tion.