Trane Comfort Link 2 Instruction Manual

       11 
3) Browse the album us-ing the arrows on the right and left edges of the screen.  Touch the image to see full size images.
 Check the “Add to Slide-show” box to include the a photo in a slideshow. 
1) If you do not yet have your SD card inserted or it is not inserted all the way, you will see this message.
2) Images will be loaded from your SD card into the viewer and sized to fit the screen.
4) In thumbnail view, you can view up to 15 photos at time.  You can also see or select which photos...

12  
1) If you desire, turn “On” the screen saver. Set the wait time until the screen saver starts.
2) The “Default Screen Saver” shows the cur-rent temperature as a floating icon over a darkened black screen.
 Select “Image Screen Saver” if you have inserted an SD card and added photos to a slideshow.
3) Set the number of seconds before the next photo will display.
Screen Saver
A standard or a custom photo screen saver can be selected. 

       13 
Other Commonly Used Features6
The following pages highlight some of the more common processes you will use.
Events  and Vacations
Set up how your system will operate for special events or when you are away from home for extended periods.
Name Your  System
Give your system a name.  This is very important if you have more than one system in your home.
Dealer Information
Contact your dealer by using contact information in the Service menu. 

14  
1-Touch Presets
Set up these presets to make quick temperature setpoint changes from the Home Screen.
Security
Protect your system from accidental or unwanted changes to your system by using a PIN lock.
Time & Date
Set time, date and time zone.  If a wireless network is set up, the time can be automatically synced via the internet.
System Runtime History
System Runtime History monitors how much your system runs for both 
heating and cooling and also displays the average indoor temperature and...

       15 
Customize your Home Screen
Add shortcuts and customize the dashboard.
Wireless Network Setup
Set up a connection to your wireless network to enable weather and software update features.  See the following section 
for setup details (802.11 B/G wireless router and internet required).
Humidity
You may see and adjust the humidity level in your home and adjust the humidity setpoints for both Heating and Cooling 
modes (for systems equipped with humidity control). 

16  
Optional Wireless  Networking7
Enabling wireless networking brings addi-
tional functionality to your control.
NOTE:  On a normally configured 
network, familiarity with a personal 
wireless network is helpful but not 
necessarily required for installation.
If your personal wireless network is 
a secure network, you will need the 
password.
IMPORTANT:  
After wireless networking is enabled, 
you will need to register your system 
with a valid email address before the 
weather data will be...

       17 
2) Enable the wire-less radio by pressing “Wire-less   ON/OFF”.
3) After the wire-less radio is enabled, press the “Connect to a Network” button to choose from a list of available wireless net-works.
Enabling Wireless  Networking7.1
1)  Enter the Wireless Network Setup Menu.
NOTE:  If the router is configured to not broadcast its SSID, refer to Advanced Network Settings. 

18  
The signal strength is indicated in bars.  The more bars, the better the signal strength. 
A minimum of three bars is required for stable network operation.  The network will op-erate with one or two bars, but may result in intermittent or lost connections.
NOTE:  Signal strength may be affected by router model, interference, obstructions and distance from the router. Consult router documentation for additional information.   
Available broadcasting networks with an adequate signal strength will...

       19 
1A) If the network is unsecured (with an “open” padlock), the following mes-sage will be dis-played. 
2) Enter the network key (case-sensitive password).   You or your network administrator will need to provide the required informa-tion.
1B) If the network is secured (with a “closed” padlock), the following mes-sage will be dis-played. 
3) The control will connect to the wireless network.
4) When the control has successfully joined the wire-less network, the name of the network will be...

20  
Advanced networking will be required in the following two instances:
1 . When connecting to a non-broadcast network2 . When configuring a static IP address 
Advanced Networking Information7.4
Enter the Advanced Network Setup Menu.
IMPORTANT:  
The Advanced Network screens are intended for individuals with networking familiarity.  
You or your network administrator will need to provide the required information.  
If any of this information is unknown or for questions specific to the wireless router,...