TP-Link Router TL-WR542G User Manual

TL-WR542G54Mbps Wireless Router User Guide 
 52
 
Figure 4-39 MAC address Filtering 
Before setting up MAC Filtering  entries, you must ensure that Enable  Firewall and Enable MAC 
Filtering have been selected on the Firewall page.  To Add a MAC Address filtering entry, clicking 
the  Add New…  button. The page  Add or Modify a MAC Address Filtering entry  will appear, 
shown in  Figure 4-40:   
 
Figure 4-40 Add or Modify a MAC Address Filtering entry 
To add or modify a MAC Address Filter ing entry,...

TL-WR542G54Mbps Wireless Router User Guide 
 53 To modify or delete an existing entry: 
1. Click the Modify in the entry you want to modify. If y ou want to delete the entry, click the  
Delete. 
2.  Modify the information.   
3. Click the  Save button. 
Click the  Enable All  button to make all entries enabled. 
Click the  Disabled All  button to make all entries disabled. 
Click the  Delete All  button to delete all entries 
Click the  Next button to go to the next page and click the  Previous button...

TL-WR542G54Mbps Wireless Router User Guide 
 54
¾ Remote Management IP Address - This is the current address you will use when 
accessing your router from the Internet. The  default IP Address is 0.0.0.0. It means this 
function is disabled. To enabl e this function, change the default IP Address to another IP 
Address as desired.   
To access the router, you will type your routers  WAN IP Address into your browsers Address 
(in IE) or Location (in Navigator) box, followed by a colon and the custom port...

TL-WR542G54Mbps Wireless Router User Guide 
 55will the flood filters be effective. 
¾
 Enable ICMP-FLOOD Attack Filtering -  Enable  or Disable  the ICMP-FLOOD  Attack 
Filtering. 
¾  ICMP-FLOOD Packets threshold: (5 ~ 3600) -  The default value is 50. Enter a value 
between 5 ~ 3600 packets. When the current  ICMP-FLOOD Packets number sis beyond the 
set value, the router will start up  the blocking function immediately. 
¾ Enable UDP-FLOOD Filtering -  Enable  or Disable  the UDP-FLOOD  Filtering....

TL-WR542G54Mbps Wireless Router User Guide 
 56
¾ Host MAC Address - The MAC address that blocked by DoS are displayed here. 
To update this page and to show the  current blocked host, click on the Refresh  button. 
Click the  Clear All button to clear all displayed entries. A fter the table is empty the blocked host 
will regain the capability to access Internet.   
Click the  Return button to return to the  Advanced Security page 
4.9 IP & MAC Binding Setting 
 
Figure 4-44 the IP & MAC Binding menu...

TL-WR542G54Mbps Wireless Router User Guide 
 57 When you want to add or modify an IP & MAC Binding entry, you can click the Add New button 
or  Modify  button, and then you will go to the  next page. This page is used for adding or 
modifying an IP & MAC Binding entry
 (shown in  Figure 4-46).   
 
Figure 4-46 IP & MAC Binding Setting (Add & Modify) 
To add IP & MAC Binding entries: 
1. Click the  Add New... button.   
2.  Enter the MAC Address and IP Address. 
3.  Select the Bind checkbox.   
4. Click...

TL-WR542G54Mbps Wireless Router User Guide 
 58Figure 4-47 Find IP & MAC Binding Entry 
Click the  Enable All  button to make all entries enabled. 
Click the  Delete All button to delete all entries. 
4.9.2 ARP List 
To manage the computer, you could observe  the computers in the LAN by checking the 
relationship of MAC address and IP address on the  ARP list, and you could configure the items on 
the ARP list also. This page displays the ARP Li st; it shows all the existing IP & MAC Binding 
entries...

TL-WR542G54Mbps Wireless Router User Guide 
 59
4.10 Static Routing 
A static route is a pre-determined  path that network information must travel to reach a specific 
host or network. To add or delete  a route, work in the area under the Static Routing page (shown 
in  Figure 4-49). 
 
Figure 4-49 Static Routing 
To add static routing entries: 
1. Click the  Add New button. (pop-up  Figure 4-50) 
2. 

Enter the following data: 
¾  Destination IP Address  -  The  Destination IP Address  is the address of...

TL-WR542G54Mbps Wireless Router User Guide 
 60 1. Click the Modify in the entry you want to modify. If y ou want to delete the entry, click the  
Delete. 
2.  Modify the information.   
3. Click the  Save button. 
Click the  Enable All  button to make all entries enabled. 
Click the  Disabled All  button to make all entries disabled. 
Click the  Delete All  button to delete all entries 
4.11 DDNS 
The router offers a Dynamic Domain Name System ( DDNS) feature. DDNS lets you assign a fixed 
host and...

TL-WR542G54Mbps Wireless Router User Guide 
 613. Type the 
Password for your DDNS account.   
4. Click the  Login button to login to the DDNS service. 
¾ Connection Status - The status of the DDNS servic e connection is displayed here. 
Click Logout to logout of the DDNS service. 
4.11.2  Oray.net DDNS 
If your selected dynamic DNS  Service Provider is www.oray.net, the page will appear as 
shown in  Figure 4-52: 
 
Figure 4-52 Oray.net DDNS Settings 
To set up for DDNS, follow these instructions: 
1....